kanzi::Texture::CreateInfoRenderpassRenderTarget Struct Reference

Texture creation parameters for texture that can be used as render target for renderpasses. More...

#include <kanzi/core.ui/graphics2d/texture_create_info.hpp>

Inheritance diagram for kanzi::Texture::CreateInfoRenderpassRenderTarget:

Public Member Functions
	CreateInfoRenderpassRenderTarget (Renderer *renderer, unsigned int sampleCount, unsigned int width, unsigned int height, GraphicsFormat format)
	Constructor for CreateInfoRenderpassRenderTarget - multisample version.
	CreateInfoRenderpassRenderTarget (unsigned int width, unsigned int height, GraphicsFormat format)
	Constructor for CreateInfoRenderpassRenderTarget - non-multisample version.
Public Member Functions inherited from kanzi::Texture::CreateInfo2D
	CreateInfo2D (BitmapImageUniquePtr image)
	CreateInfo2D constructor for texture creation parameters, for creating a two dimensional texture that is initialized from an image.
	CreateInfo2D (Sampler::MipmapMode mipmaps, BitmapImageUniquePtr image)
	CreateInfo2D constructor that also takes in mipmap mode.
	CreateInfo2D (unsigned int width, unsigned int height, GraphicsFormat format)
	CreateInfo2D constructor for texture creation parameters, for creating a two dimensional texture with specified format and size.
Public Member Functions inherited from kanzi::Texture::CreateInfo
Status	adjust (const Renderer &renderer, string_view name)
	Validates and applies adjustments to some texture creation parameters in case of avoidable error conditions.
	CreateInfo ()
	Default constructor for texture create info.
void	updateShapeAndFormatFromImages ()
	Use updateShapeAndFormatFromImages() to fill in format, width, height from images.
Status	validate (const Renderer &renderer) const
	Perform validation of texture creation parameters.
Status	validate (const Renderer &renderer, string_view name) const
	Perform validation of texture creation parameters.

Additional Inherited Members
Public Types inherited from kanzi::Texture::CreateInfo
enum	Status {   StatusInvalidType , StatusTypeNotSupported , StatusInvalidRenderTargetMode , StatusInvalidImageCount ,   StatusMissingImages , StatusImageMissingMipmaps , StatusInvalidImageSize , StatusInvalidMinimumSize ,   StatusInvalidMaximumSize , StatusInvalidMipmapSize , StatusUnsupportedGraphicsFormat , StatusUnsupportedTextureFilter ,   StatusInvalidFeatures , StatusUnsupportedMultisampleFilter , StatusUnsupportedMultisampleMipmaps , StatusUnsupportedMultisampleSamples ,   StatusUnsupportedInternalRenderTargetSampleCount , StatusUnsupportedSampleCount , StatusImageFormatMismatch , StatusImageIncompatibleWithDevice ,   StatusUnsupportedDepthComparisonMode , StatusValid }
	Status tells if texture creation parameters can be used to create a texture. More...
enum class	Type {   Image , Cubemap , RenderTarget , NativeImage ,   CubemapRenderTarget }
	Specifies the available texture types. More...
Static Public Member Functions inherited from kanzi::Texture::CreateInfo
static CreateInfo	createSubstitutePattern (const Renderer &renderer, TextureType type)
	Create a texture create info structure for a black 1x1 texture.
Public Attributes inherited from kanzi::Texture::CreateInfo
Sampler::AddressingMode	addressingMode
	Texture addressing mode.
float	anisotropy
	Texture anisotropy.
unsigned int	depth
	Reserved for future use.
GraphicsCompareFunction	depthCompareFunction
	Depth comparison function.
GraphicsFormat	depthStencilFormat
	DepthStencil format.
unsigned int	features
	Required format features.
GraphicsFormat	format
	Format for texture.
unsigned int	height
	Height for the base level of texture.
unsigned int	heightDivisor
	Automatic size determination divisor for height, 0 when not automatic.
vector< BitmapImageSharedPtr >	images
	Images that are used to create the texture.
Sampler::Filter	magnificationFilter
	Texture minification filter.
float	maxLod
	Reserved for future use.
MemoryType	memoryType
	Memory type for the texture.
Sampler::Filter	minificationFilter
	Texture magnification filter.
float	minLod
	Reserved for future use.
float	mipLodBias
	Reserved for future use.
unsigned int	mipmapLevelCount
	Number of mipmap levels for the texture.
Sampler::MipmapMode	mipmapMode
	Mipmap mode for the texture.
NativeDeploymentTarget	nativeDeploymentTarget
	Native deployment target to use for memory storage if supported by the backend.
RenderTargetMode	renderTargetMode
	RenderTarget mode for the texture.
unsigned int	renderTargetSampleCount
	Specifies number of samples for the draw renderbuffer when RenderTargetMode is RenderTargetModeExternal.
TextureType	type
	Texture type.
unsigned int	width
	Width for the base level of texture.
unsigned int	widthDivisor
	Automatic size determination divisor for width, 0 when not automatic.
Protected Member Functions inherited from kanzi::Texture::CreateInfo
Status	validateFormat (const Renderer &renderer) const
	Validates texture format and features.
Status	validateImages (const Renderer &renderer) const
	Test if given set of images can be used to create Texture.
Status	validateSize (const Renderer &renderer) const
	Validates texture size against minimum valid texture size (1x1) and maximum supported by graphics adapter.
Status	validateTargetCompatibility (const Renderer &renderer) const
	Checks for known device incompatibilities, for example with texture formats and size.

Detailed Description

Texture creation parameters for texture that can be used as render target for renderpasses.

You can use the resulting texture as content in Image2D nodes or texture brushes. You can also use the resulting texture in materials for 3D rendering or material brushes.

Constructor & Destructor Documentation

CreateInfoRenderpassRenderTarget() [1/2]

kanzi::Texture::CreateInfoRenderpassRenderTarget::CreateInfoRenderpassRenderTarget ( unsigned int width, unsigned int height, GraphicsFormat format )

explicit

Constructor for CreateInfoRenderpassRenderTarget - non-multisample version.

After the CreateInfoRenderpassRenderTarget constructor:

• Texture features is set to GraphicsFormatFeatureSampledImage | GraphicsFormatFeatureColorAttachment.
• Texture rendertarget mode is set to RenderTargetModeExternal, so renderpasses can use the resulting texture.

The following (from CreateInfo2D constructor) also applies:

• Texture type is set to TypeTwoDimensional.
• Texture size and format is set according to constructor parameters.

The following (from CreateInfo constructor) also applies:

• Texture minification and magnification filter settings are set to FilterNearest.
• Texture wrap mode is set to AddressingModeClamp, so texture will not repeat.
• Texture mipmap mode is set to MipmapModeBase, and mipmapLevelCount is set to 1, so texture will have only base image, no mipmaps.

Note

After constructor, due to filter settings and lack of mipmaps, the resulting texture should only be used when texture content is shown without scaling. If resulting texture is shown with scaling, the result has noticeable aliasing. You can adjust settings in the create info structure after constructor before passing it to Texture::create() if default settings are not ideal for you.

Not all texture formats support rendering to (GraphicsFormatFeatureColorAttachment). Make sure you use texture format that your device supports rendering to.

When you create texture from CreateInfoRenderpassRenderTarget, texture contents are initially undefined. Set texture as rendertarget for a renderpass, and arrange viewport node to be rendered with the renderpass before using the texture as content.

See also

Scene::RenderPassProperty

Parameters

width	Width for the texture.
height	Height for the texture.
format	Format for the texture.

CreateInfoRenderpassRenderTarget() [2/2]

kanzi::Texture::CreateInfoRenderpassRenderTarget::CreateInfoRenderpassRenderTarget ( Renderer * renderer, unsigned int sampleCount, unsigned int width, unsigned int height, GraphicsFormat format )

explicit

Constructor for CreateInfoRenderpassRenderTarget - multisample version.

Use this CreateInfoRenderpassRenderTarget to create a texture which can be used in renderpasses with multisample anti aliasing.

Note

CreateInfoRenderpassRenderTarget constructor will throw an exception, which may stop program execution, if graphics device does not support multisample renderbuffers.

After the CreateInfoRenderpassRenderTarget constructor:

• Texture features will have GraphicsFormatFeatureSampledImage and GraphicsFormatFeatureColorAttachment bits set. If graphics device supports multisampled render to texture extension, GraphicsFormatFeatureColorAttachment bit will be set in features. Else, if any other multisample technique is supported by graphics device, GraphicsFormatFeatureBlitDestination bit will be set in features.
• Texture rendertarget mode is set to RenderTargetModeExternal, so renderpasses can use the resulting texture.
• Texture renderTargetSampleCount is set to requested number of samples

The following (from CreateInfo2D constructor) also applies:

• Texture type is set to TypeTwoDimensional.
• Texture size and format is set according to constructor parameters.

The following (from CreateInfo constructor) also applies:

• Texture minification and magnification filter settings are set to FilterNearest.
• Texture wrap mode is set to AddressingModeClamp, so texture will not repeat.
• Texture mipmap mode is set to MipmapModeBase, and mipmapLevelCount is set to 1, so texture will have only base image, no mipmaps.

Note

After constructor, due to filter settings and lack of mipmaps, the resulting texture should only be used when texture content is shown without scaling. If resulting texture is shown with scaling, the result has noticeable aliasing. You can adjust settings in the create info structure after constructor before passing it to Texture::create() if default settings are not ideal for you.

Not all texture formats support rendering to (GraphicsFormatFeatureColorAttachment). Make sure you use texture format that your device supports rendering to.

When you create texture from CreateInfoRenderpassRenderTarget, texture contents are initially undefined. Set texture as rendertarget for a renderpass, and arrange a viewport node to be rendered with the renderpass before using the texture as content.

Note

The resulting texture is not a multisample texture. For all sampling purposes, the resulting texture does not have multiple samples. Rendering to the texture happens through either a multisample renderbuffer or implicit resolve (multisampled render to texture extension)

See also

Scene::RenderPassProperty

Parameters

renderer	Renderer, to provide multisample path.
sampleCount	Number of samples.
width	Width for the texture.
height	Height for the texture.
format	Format for the texture.

---

The documentation for this struct was generated from the following file:

• kanzi/core.ui/graphics2d/texture_create_info.hpp