Material¶
Material properties¶
Name |
Description |
Inherited |
Exported to Kanzi Engine |
|---|---|---|---|
Material Type |
Material type of this material |
Yes |
No |
Material available properties¶
Name |
Description |
Inherited |
Exported to Kanzi Engine |
|---|---|---|---|
Alpha Cutoff |
Sets the cutoff threshold for alpha cutting. If the alpha value is less than the value of this property, Kanzi discards the fragment. The default value is 0.5. |
No |
Yes |
Ambient Color |
The color of the material when lights are not present. |
No |
Yes |
Base Color Factor |
Sets the base color for the material. |
No |
Yes |
Base Color Texture |
Sets the texture that contains the base color for the material. Use the Base Color Factor property to filter the value from this texture. |
No |
Yes |
Blend Intensity |
Controls the intensity of materials that are blended on top of an existing color. Attached property enables overriding of the blend intensity of the used materials at render pass or object node level. |
No |
Yes |
Blend Mode |
Sets how to blend colors:
|
No |
Yes |
BRDF Lookup Table |
Gets the Bidirectional Reflectance Distribution Function (BRDF) lookup table for the material. The BRDF table is a texture that contains precomputed information about how light reflects off a material. You can use it to improve rendering quality. |
No |
Yes |
Brush Color |
Color for brush. Set alpha to 0 to disable brush. |
No |
Yes |
Brush Horizontal Tiling |
Horizontal Tiling for the brush. Affects the scale of texture coordinates. |
No |
Yes |
Brush Modulate Color |
Modulation color for brush. Effects brush rendering that needs color modulation. |
No |
Yes |
Brush Texture |
Texture for brush. |
No |
Yes |
Brush Vertical Tiling |
Vertical Tiling for the brush. Affects the scale of texture coordinates. |
No |
Yes |
Calculated Offset |
Reports the current relative offset of an item in the Grid List Box in proportional range [0, 1]. |
No |
Yes |
Calculated Offset |
Reports the current offset of an item in a Trajectory Layout in the proportional range [0, 1]. |
No |
Yes |
Clear Coat Normal Scale |
Sets the clear coat normal scale for the material. Use the scale to set the intensity of the Clear Coat Normal Texture. |
No |
Yes |
Clear Coat Normal Texture |
Sets the texture that contains a clear coat normal map for the material. Use the Clear Coat Normal Scale property to scale the texture value. |
No |
Yes |
Clear Coat Roughness Factor |
Sets the roughness of the outer clear coat layer for the material: 0 represents a smooth, glossy surface, and 1 represents a rough, diffuse surface. |
No |
Yes |
Clear Coat Roughness Texture |
Sets the texture that contains a clear coat roughness map for the material. Kanzi reads the roughness from the Green channel of the texture. Use the Clear Coat Roughness Factor property to scale the roughness from this texture. |
No |
Yes |
Clear Coat Strength Factor |
Sets the clear coat strength for the material: 0 represents a material with no clear coat, and 1 represents a full strength clear coat. |
No |
Yes |
Clear Coat Strength Texture |
Sets the texture that contains a clear coat strength map for the material. Kanzi reads the strength from the Red channel of the texture. Use the Clear Coat Strength Factor property to scale the strength from this texture. |
No |
Yes |
Custom Asset Thumbnail |
When enabled, the asset will have selected image as thumbnail instead of the generated one. |
No |
No |
Description |
Add a description of the purpose of this item. To export descriptions to a plain text file, select File > Export > Export Descriptions. When you export the kzb file, this description is not included in the exported file. |
No |
No |
Detail Base Color Factor |
Sets the detail base color for the material. The detail base color is alpha blended with the standard base color. |
No |
Yes |
Detail Base Color Texture |
Sets the detail texture that contains the base color for the material. Use the Detail Base Color Factor property to filter the value from this texture. The detail base color is alpha blended with the standard base color. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture. |
No |
Yes |
Detail Clear Coat Normal Scale |
Sets the detail clear coat normal scale for the material. Use the scale to set the intensity of the Detail Clear Coat Normal Texture. |
No |
Yes |
Detail Clear Coat Normal Texture |
Sets the detail texture that contains a clear coat normal map for the material. Use the Detail Clear Coat Normal Scale property to scale the texture value. |
No |
Yes |
Detail Clear Coat Roughness Texture |
Sets the detail texture that contains a clear coat roughness map for the material. Use the Clear Coat Roughness Factor and Clear Coat Roughness Texture properties to scale the roughness from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture. |
No |
Yes |
Detail Clear Coat Strength Texture |
Sets the detail texture that contains a clear coat strength map for the material. Kanzi reads the strength from the Red channel of the texture. Use the Clear Coat Strength Factor and Clear Coat Strength Texture properties to scale the strength from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture. |
No |
Yes |
Detail Diffuse Color Factor |
Sets the detail diffuse color for the material. Kanzi alpha blends the detail diffuse color with the standard diffuse color. |
No |
Yes |
Detail Diffuse Color Texture |
Sets the detail texture that contains the diffuse color for the material. Use the Detail Diffuse Color Factor property to filter the value from this texture. Kanzi alpha blends the detail diffuse color with the standard diffuse color. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture. |
No |
Yes |
Detail Emissive Factor |
Sets the color of the light that is emitted from a detail texture for the material. This color affects the local material rendering, but the light is not cast to other objects. The detail emissive light is alpha blended with the standard emissive light. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture. |
No |
Yes |
Detail Emissive Texture |
Sets the detail texture that contains the light emitted from the material. Use the Detail Emissive Factor property to scale the value from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture. |
No |
Yes |
Detail Glossiness Texture |
Sets the detail texture that contains a glossiness map for the material. Kanzi reads the glossiness from the Alpha channel of this texture. Use the Glossiness Factor and Glossiness Texture properties to scale the glossiness from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture. |
No |
Yes |
Detail Metallic Texture |
Sets the detail texture that contains a metallic map for the material. Kanzi reads the metalness from the Blue channel of this texture. Use the Metallic Factor and Metallic Texture properties to scale the metalness from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture. |
No |
Yes |
Detail Normal Scale |
Sets the detail normal scale for the material. Use the scale to set the intensity of the Detail Normal Texture. |
No |
Yes |
Detail Normal Texture |
Sets the detail texture that contains a normal map for the material. Use the Detail Normal Scale property to scale the texture value. |
No |
Yes |
Detail Occlusion Strength |
Sets the detail occlusion strength for the material. Use the strength to set the intensity of the Detail Occlusion Texture. |
No |
Yes |
Detail Occlusion Texture |
Sets the detail texture that contains an occlusion map for the material. Kanzi reads the occlusion from the Red channel of this texture. Use the Detail Occlusion Strength property to scale the occlusion from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture. |
No |
Yes |
Detail Roughness Texture |
Sets the detail texture that contains a roughness map for the material. Kanzi reads the roughness from the Green channel of the texture. Use the Roughness Factor and Roughness Texture properties to scale the roughness from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture. |
No |
Yes |
Detail Specular Color Factor |
Sets the detail specular color for the material. Kanzi alpha blends the detail specular color with the standard specular color. |
No |
Yes |
Detail Specular Color Texture |
Sets the detail texture that contains the specular color for the material. Use the Detail Specular Color Factor property to filter the value from this texture. Kanzi alpha blends the detail specular color with the standard specular color. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture. |
No |
Yes |
Detail Texture Offset |
Sets the detail texture offset for the material. Kanzi adds this value to the UVs to produce a second set of detail UVs to use for all detail texture properties. |
No |
Yes |
Detail Texture Tiling |
Sets the detail texture tiling factor for the material. Kanzi multiplies this value by the UVs to produce a second set of detail UVs to use for all detail texture properties. |
No |
Yes |
Diffuse Color |
The color of the material when it is lit by a light. |
No |
Yes |
Diffuse Color Factor |
Sets the diffuse color for the material. |
No |
Yes |
Diffuse Color Texture |
Sets the texture that contains the diffuse color for the material. Use the Diffuse Color Factor property to filter the value from this texture. |
No |
Yes |
Directional Light |
Directional light settings |
No |
No |
Disable KZB Export |
Disables the exporting of the item into KZB. Can be used for, e.g. letting items out from certain profiles. The disabled items are always included in preview. |
No |
No |
Emissive Color |
The color of the light that is emitted from the material surface. |
No |
Yes |
Emissive Factor |
Sets the color of the light that is emitted from the material. This color affects the local material rendering, but the light is not cast to other objects. |
No |
Yes |
Emissive Texture |
Sets the texture that contains the light emitted from the material. Use the Emissive Factor property to scale the value from this texture. |
No |
Yes |
Environment Ambient Factor |
Sets the strength of the cubemap texture to use for ambient environment light. Use the Environment Ambient Texture property to set the cubemap texture. The ambient environment light affects diffuse lighting in image based lighting. |
No |
Yes |
Environment Ambient Texture |
Sets the cubemap to use for the ambient environment light for the material. This cubemap affects the diffuse lighting during image based lighting. Use the Environment Ambient Factor property to set the strength of the cubemap texture. |
No |
Yes |
Environment Reflection Factor |
Sets the strength of the cubemap texture to use for specular environment light. Use the Environment Reflection Texture property to set the cubemap texture. The specular environment light affects reflective lighting in image based lighting. |
No |
Yes |
Environment Reflection Texture |
Sets the cubemap to use for the specular environment light for the material. This cubemap affects reflective lighting during image based lighting. Use the Environment Reflection Factor property to set the strength of the cubemap texture. |
No |
Yes |
Export in Asset Package |
When enabled, this item is exported into asset package if this project is saved as one. |
No |
No |
Exposure |
Sets the exposure compensation for the material. The exposure compensation emulates camera exposure by controlling the total amount of light rendered. Use a negative value to darken the rendered image, and a positive value to lighten the image. Exposure is exponential: 1.0 is twice as bright as 0.0, and -1.0 is half as bright as 0.0. |
No |
Yes |
Font Color |
Sets the color of the text. |
No |
Yes |
Global Ambient Color |
The color that is multiplied automatically with the "Ambient" property of the materials in the scene. |
No |
Yes |
Glossiness Factor |
Sets the glossiness of the material: 0 represents a rough, diffuse surface, and 1 represents a smooth, glossy surface. |
No |
Yes |
Glossiness Texture |
Sets the texture that contains a glossiness map for the material. Kanzi reads the glossiness from the Alpha channel of this texture. Use the Glossiness Factor property to scale the glossiness from this texture. |
No |
Yes |
Glyph Texture |
The automatic texture of the glyph cache. |
No |
Yes |
Is Used by Code |
Whether or not the application code uses this asset. Used for determining unused assets. |
No |
No |
Keep Alive Behavior |
The keep-alive behavior of this resource. Can be used to deny unloading of the resource. |
No |
No |
Mask Texture |
The texture for masking other texture or color. |
No |
Yes |
Mask Texture Offset |
Sets an offset for mask in materials. |
No |
Yes |
Mask Texture Tiling |
Determines the number of times a mask is presented in a material |
No |
Yes |
Metallic Factor |
Sets the metalness of the material: 0 represents a non-metallic or dielectric object, and 1 represents a metallic object. |
No |
Yes |
Metallic Texture |
Sets the texture that contains a metallic map for the material. Kanzi reads the metalness from the Blue channel of this texture. Use the Metallic Factor property to scale the value from this texture. |
No |
Yes |
Normal Scale |
Sets the normal scale for the material. Use the scale to set the intensity of the Normal Texture. |
No |
Yes |
Normal Texture |
Sets the texture that contains a normal map for the material. Use the Normal Scale property to scale the texture value. |
No |
Yes |
Occlusion Strength |
Sets the occlusion strength for the material. Use the strength to set the intensity of the Occlusion Texture. |
No |
Yes |
Occlusion Texture |
Sets the texture that contains an occlusion map for the material. Use the Occlusion Strength property to scale the occlusion from the texture. |
No |
Yes |
Opacity |
Opacity of the node. |
No |
Yes |
Point Light |
Point light settings |
No |
No |
Roughness Factor |
Sets the roughness of the material: 0 represents a smooth, glossy surface, and 1 represents a rough, diffuse surface. |
No |
Yes |
Roughness Texture |
Sets the texture that contains a roughness map for the material. Kanzi reads the roughness from the Green channel of the texture. Use the Roughness Factor property to scale the roughness from this texture. |
No |
Yes |
Specular Anti-Aliasing Strength |
Sets the strength of the specular anti-aliasing effect. Higher value results in blurrier specular highlights. For no specular anti-aliasing, set the value to 0. For full specular anti-aliasing, set the value to 1. The default value is 0.25. |
No |
Yes |
Specular Anti-Aliasing Threshold |
Sets the upper limit for the amount of specular anti-aliasing effect to apply. The default value is 0.18. |
No |
Yes |
Specular Color |
The color of the specular reflection. |
No |
Yes |
Specular Color Factor |
Sets the specular color for the material. |
No |
Yes |
Specular Color Texture |
Sets the texture that contains the specular color for the material. Use the Specular Color Factor property to filter the value from this texture. |
No |
Yes |
Specular Exponent |
Determines the size of the specular highlight. |
No |
Yes |
Spot Light |
Spot light settings |
No |
No |
Texture |
The texture of the material. |
No |
Yes |
Texture 0 |
Sets the first texture you want the Blit Render Pass to blit. |
No |
Yes |
Texture 1 |
Sets the second texture you want the Blit Render Pass to blit. |
No |
Yes |
Texture 2 |
Sets the third texture you want the Blit Render Pass to blit. |
No |
Yes |
Texture 3 |
Sets the fourth texture you want the Blit Render Pass to blit. |
No |
Yes |
Texture Offset |
Sets an offset for texture in materials. |
No |
Yes |
Texture Tiling |
Determines the number of times a texture is presented in a material. |
No |
Yes |
Tone Map Linear Scale |
Sets the scale for the linear tonemap option for the material. When linear tonemapping is used, Kanzi divides all output color by the value of this property. |
No |
Yes |
Transition Phase |
The phase of the transition. For example, use for pixel-based effects. |
No |
Yes |
Visibility Across Projects |
Sets whether this resource is available to referencing projects: - Project setting uses the value of the Resource Visibility Across Projects property of the project. - Private makes the resource available only to this project. - Public makes the resource available in the dropdown menus of referencing projects. |
No |
No |
Visible Amount in Parent |
Sets the amount the node is inside its parent. Use the value of this property in shaders to implement fades. Calculated by the parent node. |
No |
Yes |
Material messages¶
Name |
Description |
Inherited |
Exported to Kanzi Engine |
|---|---|---|---|
About To Gain Focus |
Kanzi sends this message before a focusable node receives focus. |
No |
Yes |
About To Lose Focus |
Kanzi sends this message before the focused node loses focus. |
No |
Yes |
Activity Activated |
An Activity sends this message when it is activated. |
No |
Yes |
Activity Activating |
An Activity sends this message when it is in the activating state. |
No |
Yes |
Activity Deactivated |
An Activity sends this message when it is deactivated. |
No |
Yes |
Activity Deactivating |
An Activity sends this message when it is in the deactivating state. |
No |
Yes |
Activity Prefab Attached |
An Activity Host sends this message when it attaches the prefab of the Activity that is activated. |
No |
Yes |
Activity Prefab Detached |
An Activity Host sends this message when it detaches the prefab of the Activity that is deactivated. |
No |
Yes |
Activity Status Changed |
An Activity sends this message when the value of its Activity Status property changes. |
No |
Yes |
Animation Playback Completed |
Occurs when animation player completes animation playback. |
No |
Yes |
Animation Playback Started |
Occurs when animation player starts animation playback. |
No |
Yes |
Animation Playback Stopped |
Occurs when animation player stops animation playback. |
No |
Yes |
Asynchronous Load Completed |
Occurs when asynchronous loading of resources from a prefab has been finished. |
No |
Yes |
Button: Cancel |
Occurs when a user lifts their finger outside of a Button that they previously pressed. |
No |
Yes |
Button: Click |
Occurs when a user lifts their finger on top of a Button that they previously pressed and when the time set by the Auto Press Interval property in the pressed Button expires. |
No |
Yes |
Button: Down |
Occurs when the user presses down the Button. |
No |
Yes |
Button: Enter |
Button: Enter trigger is set off: - When the user presses down the button. - When the user presses down the button, moves the pointer outside of the button area, and then moves the pointer back to the button area while still holding down the pointer. |
No |
Yes |
Button: Leave |
Button: Leave trigger is set off: - When the user presses down the button and then lifts the pointer. - When the user presses down the button and then moves the pointer outside of the button area. - When the user sets off a Button : Long Press trigger. |
No |
Yes |
Button: Long Press |
Occurs when the user presses down a Button and holds the Button pressed for the amount of milliseconds defined in the Hold Interval property of that Button. |
No |
Yes |
Click |
Occurs when the user presses and releases a hit-testable node with a Click Manipulator, while the pointer is still within the node area and Kanzi does not recognize another gesture. You cannot use this trigger with nodes that handle input by default, such as Button and Toggle Button nodes. |
No |
Yes |
Click Begin |
Occurs when the user presses a hit-testable node with a Click Manipulator. You cannot use this trigger with nodes that handle input by default, such as Button and Toggle Button nodes. |
No |
Yes |
Click Cancel |
Occurs when the user first presses a hit-testable node with a Click Manipulator, then moves the pointer outside of the node area, and lifts the pointer. You cannot use this trigger with nodes that handle input by default, such as Button and Toggle Button nodes. |
No |
Yes |
Click Enter |
Occurs when the user presses a hit-testable node with a Click Manipulator and then every time the user moves the pointer on top of that node while still holding down the pointer. You cannot use this trigger with nodes that handle input by default, such as Button and Toggle Button nodes. |
No |
Yes |
Click Leave |
Occurs when the user presses a hit-testable node with a Click Manipulator and then every time the user moves the pointer outside of that node. You cannot use this trigger with nodes that handle input by default, such as Button and Toggle Button nodes. |
No |
Yes |
Command |
Command message arguments |
No |
Yes |
Composition Text Changed |
Occurs when the text produced in an Input Method Editor is updated in a Text Box node. |
No |
Yes |
Composition Text Committed |
Occurs: - When the text produced in an Input Method Editor is committed to the cached text in a Text Box node. - When a trigger executes the Commit Composition Text action. |
No |
Yes |
Cursor Moved |
Occurs when the user moves the cursor in a Text Box node. |
No |
Yes |
Data Trigger |
Monitors changes in properties and data source values. Use a Data Trigger to apply an action to either set a property value of a target node or activate an Activity node. |
No |
Yes |
Drag and Drop Canceled |
Occurs when focus moves away from the node during the drag-and-drop gesture. |
No |
Yes |
Drag and Drop Finished |
Occurs when the user lifts their finger after starting the drag-and-drop gesture. |
No |
Yes |
Drag and Drop Moved |
Occurs when the user moves their finger after starting the drag-and-drop gesture. |
No |
Yes |
Drag and Drop Started |
Occurs when the user holds their finger for 500ms on the node. |
No |
Yes |
Easing Interpolation Completed |
Occurs when Property Target Easing Interpolator completes its interpolation. |
No |
Yes |
Editing Finished |
Occurs when a Text Box node leaves the editing state after the user modified the text content. |
No |
Yes |
Editing Started |
Occurs when the user makes the first modification to the text in a Text Box node that is in the editing state. |
No |
Yes |
Entered Editing State |
Occurs when a Text Box node enters the editing state. |
No |
Yes |
Entered State |
Occurs when a state manager has entered a state. |
No |
Yes |
Focus Entered Focus Scope |
When focus enters a focus scope, Kanzi sends this message to the focus scope node that contains the node that gains focus. |
No |
Yes |
Focus Gained |
Kanzi sends this message to the node that received focus. |
No |
Yes |
Focus Left Focus Scope |
When focus leaves a focus scope, Kanzi sends this message to the focus scope node that contains the node that loses focus. |
No |
Yes |
Focus Lost |
Kanzi sends this message to the node that lost focus. |
No |
Yes |
Input Method Action |
Occurs when the user taps the action button on their on-screen keyboard while editing the text in a Text Box node. |
No |
Yes |
Input Method Available |
Occurs when an input method becomes available to a Text Box node. For example, an on-screen keyboard becomes available when it appears on the screen. |
No |
Yes |
Input Method Unavailable |
Occurs when the input method that is composing text in a Text Box node becomes unavailable. For example, an on-screen keyboard becomes unavailable when the user hides it. |
No |
Yes |
Input Outside Overlay |
Kanzi sends this message to an overlay focus scope when the application area outside the boundaries of that overlay receives input. |
No |
Yes |
Intermediate Click |
Occurs when the user presses and releases a hit-testable node with a Multi-Click Manipulator that is set to send messages for intermediate clicks. To set a Multi-Click Manipulator to send messages for intermediate clicks, in the Multi-Click Manipulator enable the Send Intermediate Click Messages property. You cannot use this trigger with nodes that handle input by default, such as Button and Toggle Button nodes. |
No |
Yes |
Interpolation Completed |
Occurs when property target interpolator completes interpolation. |
No |
Yes |
Key Canceled |
Occurs when Kanzi recognizes a key-canceled gesture. A key-canceled gesture occurs when Kanzi recognizes that the user canceled a gesture. |
No |
Yes |
Key Navigation Canceled |
Occurs when the key-pressed gesture is canceled for the navigation direction. |
No |
Yes |
Key Navigation Finished |
Occurs when Kanzi recognizes the key-released gesture for the navigation direction. To capture key navigation gestures for a node, create a Navigation Manipulator component in that node. |
No |
Yes |
Key Navigation Started |
Occurs when Kanzi recognizes the key-pressed and key repeat gestures for the navigation direction. To capture key navigation gestures for a node, create a Navigation Manipulator component in that node. |
No |
Yes |
Key Pressed |
Occurs when Kanzi recognizes a key-pressed gesture. A key-pressed gesture occurs when Kanzi recognizes a key event that contains all the elements that compose that gesture. |
No |
Yes |
Key Released |
Occurs when Kanzi recognizes a key-released gesture. A key-released gesture occurs when Kanzi recognizes the release of one of the elements that compose that gesture. |
No |
Yes |
Left Editing State |
Occurs when a Text Box node leaves the editing state |
No |
Yes |
Left State |
Occurs when a state manager has left a state. |
No |
Yes |
List Box: Item Hidden |
Occurs when an item is unloaded from the working memory. To set how many items you want to keep loaded in the working memory at a time, use the Keep Alive Item Count property. |
No |
Yes |
List Box: Item Selected |
Occurs when an item is selected. |
No |
Yes |
List Box: Item Visible |
Occurs when an item is loaded to the working memory. To set how many items you want to keep loaded in the working memory at a time, use the Keep Alive Item Count property. |
No |
Yes |
List Box: Scroll Finished |
Occurs when the List Box stops scrolling. |
No |
Yes |
List Box: Scroll Started |
Occurs when the List Box starts to scroll. |
No |
Yes |
List Box: Scrolled |
Occurs when the List Box scrolls. |
No |
Yes |
List Box: Target Changed |
Occurs when List Box gets a new target item. |
No |
Yes |
List Box: User Scroll Finished |
Occurs when the application user stops scrolling the List Box. |
No |
Yes |
List Box: User Scroll Started |
Occurs when the application user starts to scroll the List Box. |
No |
Yes |
Long Press |
Occurs when the user presses a hit-testable node with a Long-Press Manipulator and holds the press for the time that you set in the Long-Press Manipulator. You cannot use this trigger with nodes that handle input by default, such as Button and Toggle Button nodes. |
No |
Yes |
Long Press Cancel |
Occurs during the long-press gesture when the user moves the focus away from a hit-testable node with a Long-Press Manipulator. You cannot use this trigger with nodes that handle input by default, such as Button and Toggle Button nodes. |
No |
Yes |
Message Trigger |
No |
Yes |
|
Multi-Click |
Occurs when the user presses and releases a hit-testable node with a Multi-Click Manipulator a specified number of times (default 2) within a set amount of time (default 250 ms) between presses. You cannot use this trigger with nodes that handle input by default, such as Button and Toggle Button nodes. |
No |
Yes |
Multi-Click Canceled |
Occurs during the multi-click gesture when the user moves the focus away from a hit-testable node with a Multi-Click Manipulator. You cannot use this trigger with nodes that handle input by default, such as Button and Toggle Button nodes. |
No |
Yes |
On Attached |
This trigger is set off when the item is initialized. For example, when you add a node to the node tree, or enter a state that contains this trigger. |
No |
Yes |
On Property Change |
Occurs when a property is changed |
No |
Yes |
On Timer |
Occurs when timer interval is elapsed |
No |
Yes |
Overlay Brought To Front |
Occurs when an overlay focus scope becomes the foremost overlay scope in the overlay focus scope stack. |
No |
Yes |
Overlay Gained Focus |
When an overlay scope gains focus, Kanzi sends this message to the overlay scope node that contains the node that gains focus. |
No |
Yes |
Overlay Lost Focus |
When an overlay scope loses focus, Kanzi sends this message to the overlay scope node that contains the node that loses focus. |
No |
Yes |
Overlay Sent To Back |
Occurs when an overlay focus scope is no longer the foremost overlay scope in the overlay focus scope stack. |
No |
Yes |
Page Activated |
Page has been activated. |
No |
Yes |
Page Deactivated |
Page has been deactivated. |
No |
Yes |
Page Navigation Finished |
Page host has finished navigation process. |
No |
Yes |
Page Navigation Started |
Page host has started navigation process. |
No |
Yes |
Pan Canceled |
Occurs when focus moves away from the node during the pan gesture. |
No |
Yes |
Pan Entered |
Occurs when the pan gesture enters the node the manipulator is attached to. |
No |
Yes |
Pan Finished |
Occurs when the user lifts their finger after Kanzi recognizes a pan gesture. |
No |
Yes |
Pan Left |
Occurs when the pan gesture leaves the node the manipulator is attached to. |
No |
Yes |
Pan Moved |
Occurs when the user changes the position of their finger and that change exceeds the recognition thresholds. |
No |
Yes |
Pan Started |
Occurs when the user presses down their finger on the node. If the user lifts their finger before exceeding the position change threshold, Kanzi cancels the pan gesture. |
No |
Yes |
Pinch Canceled |
Occurs when focus moves away from the node during the pinch gesture. |
No |
Yes |
Pinch Finished |
Occurs when the user lifts their finger after Kanzi recognizes a pinch gesture. |
No |
Yes |
Pinch Moved |
Occurs when the user changes the position of their finger and that change exceed the scale or rotation threshold. |
No |
Yes |
Pinch Started |
Occurs when the user presses down their finger. If the user lifts their finger before it exceeds the scale or rotate threshold, Kanzi cancels the pinch. |
No |
Yes |
Range Concept: Value Change Finished |
Occurs when the range value stops changing. |
No |
Yes |
Range Concept: Value Change Started |
Occurs when the range value starts changing. |
No |
Yes |
Range Concept: Value Changed |
Occurs when the range value has changed. |
No |
Yes |
Scope Brought To Front (deprecated) |
Occurs when an overlay focus scope is brought to front. Deprecated. Use Overlay Brought To Front instead. |
No |
Yes |
Scope Sent To Back (deprecated) |
Occurs when a foremost overlay focus scope is sent to back. Deprecated. Use Overlay Sent to Back instead. |
No |
Yes |
Scroll Ended |
Occurs when the scroll position of a Scroll View node stops changing. |
No |
Yes |
Scroll Started |
Occurs when the scroll position of a Scroll View node starts changing. |
No |
Yes |
Scroll Zoomed |
Occurs when the zoom level of a Scroll View node changes. |
No |
Yes |
Scrolled |
Occurs when the scroll position of a Scroll View node changes. |
No |
Yes |
Selection Changed |
Occurs when the user changes the text selection in a Text Box node. |
No |
Yes |
Selection Cleared |
Occurs when the user clears or resets the text selection in a Text Box node. |
No |
Yes |
Selection Started |
Occurs when the user starts selecting text in a Text Box node. |
No |
Yes |
Snap Request |
Occurs when a Scroll View node requests snapping target from the hosting component. |
No |
Yes |
Text Changed |
Occurs when the user changes the text in a Text Box node. |
No |
Yes |
Text Composition Canceled |
Occurs: - When the text composition in a Text Box node is canceled by Input Method that is in text composition state. - When a trigger executes the Cancel Text Composition action. |
No |
Yes |
Toggle Button Group: Toggled |
Occurs when the toggle state of a Toggle Button node in a Toggle Button Group node changes. |
No |
Yes |
Toggle Button: State Toggled |
Occurs when the toggle state of the Button changes. |
No |
Yes |
Toggle Button: Toggled Off |
Occurs when the Button is toggled off. |
No |
Yes |
Toggle Button: Toggled On |
Occurs when the Button is toggled on. |
No |
Yes |
Transition Finished |
Occurs when a state manager finishes a transition to a state. |
No |
Yes |
Transition Started |
Occurs when a state manager begins a transition to a state. |
No |
Yes |
User Scroll Ended |
Occurs when the user stops scrolling a Scroll View node. |
No |
Yes |
User Scroll Started |
Occurs when the user starts scrolling a Scroll View node. |
No |
Yes |