Color workflow¶

Linear and nonlinear gamma color spaces¶

The purpose of the sRGB color space is to represent colors for display on computer monitors. Currently sRGB is the standard for the nonlinear gamma color space. It is needed because human perception of light is nonlinear, and computer monitors have a nonlinear response to light intensity.

The human eye distinguishes between darker shades better than lighter shades. For this reason it makes sense to preserve more accuracy for dark intensities when storing and displaying images on screens. The nonlinear gamma color space achieves this with gamma correction, which puts the intensity of each pixel in an image through a power function:

\[I^{\gamma}\]

Images are usually stored with an encoding gamma applied to them, and screens apply a decoding gamma. This image shows the graphs of the gamma transfer functions that Kanzi uses to convert between the linear and gamma color spaces.

This image shows a gradient where the intensity of the light emitted by your screen increases linearly.

../../_images/linear_emitted_intensity.png

Applying a decoding gamma to the above gradient results in this gradient where the perceptual light intensity increases linearly.

../../_images/linear_perceptual_intensity.png

The problem with the nonlinear gamma color space is its unsuitability for graphics operations. Performing color calculations in nonlinear space leads to inaccurate results in color and alpha blending. Linear color space is needed for mathematically correct lighting and color blending calculations.

In linear color space numerical intensity values correspond to their actual intensity, which makes it possible to add and multiply color values correctly. Linear color space rendering provides more accurate results and more realistic surface shading, particularly with physically based rendering techniques.

These images show an example of blending in nonlinear gamma (left) and linear (right) color space. Blending in nonlinear gamma color space results in overly bright blends and saturated bands.

Kanzi by default uses the linear color workflow, where Kanzi operates on color values in linear color space. See Using the linear color workflow and Converting applications from legacy to linear color workflow.

Kanzi also supports the nonlinear gamma, or legacy, color workflow, where Kanzi operates on color values in the gamma color space. See Using the legacy color workflow.

Using the linear color workflow¶

By default Kanzi uses the linear color workflow. This enables realistic lighting computations and correct color blending. To achieve accurate rendering of color and light, Kanzi converts all color values to linear color space before performing operations on them. Kanzi then converts the color values back to the gamma color space for storage or display.

Images¶

To configure the images in your Kanzi Studio project for linear color workflow:

In the Library > Resource Files > Images for each image resource that uses the ASTC, ETC2, JPEG, PNG, or PVRTC format set the value of the sRGB Content property:
- If the image contains sRGB color information, set the sRGB Content property to enabled. This is the default setting.
  
  If you disable the sRGB Content property for an image that contains sRGB color information, Kanzi can render the textures that use the image brighter than expected.
- If the image contains non-color information, such as a normal, roughness, or occlusion map, set the sRGB Content property to disabled.
  
  Textures that contain non-color information are stored in linear format. By disabling the sRGB Content property you set Kanzi to pass the image data to a shader directly, without performing a color space conversion.
Kanzi by default premultiplies the alpha channel of images in linear color space. To premultiply the alpha channel in the color space of the image, in the Library > Resource Files > Images select an image and in the Properties disable the Linear Premultiply property. See Preparing images in third-party tools.

Color property bindings¶

To set color values in binding expressions in the linear color workflow:

Specify Color4 values in sRGB color space. See color4.

For example:
```
Color4(0, 0.75, 0.25, 1)
```
Specify the values of individual RGB color channels in linear color space.

Use the sRGBToLinear binding function to convert a color channel value to linear color space.

For example:
- This binding expression is equal to Color4(0, 0.75, 0.25, 1):
```
color = Color4(0, 0, 0, 1)
color.g = sRGBToLinear(0.75)
color.b = sRGBToLinear(0.25)
color
```
- This binding expression is equal to Color4(0, 0.879, 0.535, 1):
```
color = Color4(0, 0, 0, 1)
color.g = 0.75
color.b = 0.25
color
```

Shaders¶

In the linear color workflow shaders expect color input to be in linear color space and they output color in linear color space. To preserve accuracy when storing color values in 8-bit per channel texture formats, Kanzi converts the color values back to the sRGB color space before storing.

Graphics API¶

The linear color workflow needs the OpenGL extension GL_EXT_sRGB to enable creating the frame buffer in sRGB mode.

To use the linear color workflow, make sure that in the Project > Properties the Target Graphics API is set to OpenGL ES 2.0 Extension Pack or higher. The default value is OpenGL ES 2.0 Extension Pack.

Using the legacy color workflow¶

In the legacy color workflow Kanzi performs operations on color values in the nonlinear gamma color space. This provides less precise rendering results than the linear color workflow.

Use the legacy color workflow when you:

Deploy your application to a device that does not support linear color space.
Migrate a project from earlier versions of Kanzi.

In the legacy color workflow Kanzi does not convert color input. If you use the Kanzi Engine API to create a ColorRGBA object, provide the color values in the sRGB color space.

To use the legacy color workflow:

Configure your application to use an unspecified color space by setting either:
- In application.cfg:
```
SurfaceColorSpace = "legacy"
```
- In the C++ application in the onConfigure() function:
```
configuration.defaultSurfaceProperties.colorSpace = "legacy";
```
See Surface properties.
In Kanzi Studio in the Project > Properties set the Color Workflow property to Legacy.
Write your shaders to output colors in the gamma space of your target display, which is likely sRGB. See Shaders.

Converting applications from legacy to linear color workflow¶

To convert your application from the legacy color workflow to the linear color workflow:

Configure your application to use the sRGB color space by removing:
- In application.cfg:
```
SurfaceColorSpace = "legacy"
```
- In the C++ application in the onConfigure() function:
```
configuration.defaultSurfaceProperties.colorSpace = "legacy";
```
When you remove that configuration, Kanzi uses for the SurfaceColorSpace the default value, srgb. See Surface properties.
In Kanzi Studio in the Project > Properties set:
- Color Workflow to Linear
- Target Graphics API to OpenGL ES 2.0 Extension Pack or higher
In the Library > Materials and Textures > Material Types for each material type make sure that:
- Bindings do not contain needless manually added sRGB conversions.
  
  For example, you do not need to use the linearTosRGB binding function to convert color values from linear color space to sRGB color space. In the linear color workflow shaders expect color input to be in linear color space.
- Shaders do not apply gamma correction at input or output.
  
  In the linear color workflow shaders expect color input to be in linear color space and they output color in linear color space.
In the Library > Resource Files > Images for each image resource that uses the ASTC, ETC2, JPEG, PNG, or PVRTC format check that the sRGB Content property is set correctly:
- If the image contains sRGB color information, set the sRGB Content property to enabled. This is the default setting.
  
  If you disable the sRGB Content property for an image that contains sRGB color information, Kanzi can render the textures that use the image brighter than expected.
- If the image contains non-color information, such as a normal, roughness, or occlusion map, set the sRGB Content property to disabled.
  
  Textures that contain non-color information are stored in linear format. By disabling the sRGB Content property you set Kanzi to pass the image data to a shader directly, without performing a color space conversion.
To get the desired color blending result, adjust the partially transparent colors in your project where needed.

For example, nodes filled with these color brushes look different in the legacy and linear color workflow modes:

Legacy color workflow

Linear color workflow