Editing shaders

In Kanzi Studio projects shader programs are stored as files on the computer hard drive. When you add shaders to the <KanziWorkspace>/Projects/<ProjectName>/Shaders directory of your Kanzi Studio project, Kanzi Studio automatically shows them in the Library > Resource Files > Shaders.

Access to the shader files is useful when you want to change all the stock material types from fragment-based to vertex-based shaders, or the other way around. If the filenames are the same, to do this, replace the shader files with the correct versions on the file system.

The fastest way to generate your own shading is to find a similar use case in the Kanzi material library, and then modify the shader and material properties, or use shaders from the VertexPhong or VertexPhongTextured material types as a template.

Kanzi Studio Shader Source Editor

You can use the Kanzi Studio Shader Source Editor to edit the shader source code. When working with the Kanzi Studio Shader Source Editor keep in mind that:

• The editor saves the changes to disk, which means that when you close a project without saving the changes, the changes saved in shader files persist on the hard disk.

• When editing shaders in the Kanzi Studio Shader Source Editor use the Uniforms and Attributes buttons to quickly add code snippets for declaring uniforms and attributes at the current cursor position.

  

• The status bar shows messages about the status of the editor, such as when the code is saved.

• When you save a shader file, Kanzi Studio compiles it automatically. If you encounter a compiling error, you can see the error in the Log. In the Preview the objects containing materials with invalid shaders are shown in red.

Shader attributes

The input for shader programs are vertex attributes and uniforms. The attributes can vary per vertex and are provided to vertex shaders. You can use the uniforms as input to either vertex or fragment shaders.

The vertex buffer of a mesh contains also a set of attributes. These vertex buffer attributes are used for sending data to vertex shaders.

Kanzi can automatically pass attributes to shader programs, but you can configure these settings manually too.

Vertex attributes always have one of these semantics and Kanzi automatically recognizes these names:

Attribute	Data type	Description
kzPosition	vec3	Position
kzNormal	vec3	Normal
kzTangent	vec3	Tangent
kzWeight	vec4	Weight
kzMatrixIndices	vec4	Matrix palette
kzTextureCoordinate0	vec2	Texture coordinate 0
kzTextureCoordinate1	vec2	Texture coordinate 1
kzTextureCoordinate2	vec2	Texture coordinate 2
kzTextureCoordinate3	vec2	Texture coordinate 3
kzColor0	vec4	Color 0
kzColor1	vec4	Color 1
kzColor2	vec4	Color 2
kzColor3	vec4	Color 3
kzMorphTargetXPosition	vec3	Morph target position X, where X is 0...8
kzMorphTargetXNormal	vec3	Morph target normal X, where X is 0...8
kzMorphTargetXTangent	vec3	Morph target tangent X, where X is 0...8

You can also add custom attributes.

If there is a one-to-one relation between shader attributes and vertex attributes, the attributes are automatically mapped against each other. You can configure the mappings manually to work differently in mesh data. You must use manual mappings if you are using shader attribute names that are not in the default list.

To view and edit the semantics of the shader attributes of a material type, in the Library > Materials and Textures > Material Types right-click a material type and select Open Shader Attributes Editor.

Shader uniforms

Shader uniforms can receive their data from these data sources:

• Kanzi default uniforms

• Property types defined in a material type.

If the name of the uniform matches any of the Kanzi default uniforms, Kanzi Engine automatically sends its value to the shader program. These uniforms are available by default:

Uniform	Data type	Description
ContentTexture	sampler2D	A texture provided by the rendered node when rendering, for example the image displayed in an Image node. See Applying custom rendering to 2D nodes and Applying custom rendering to an Image node.
RenderOpacity	float	Opacity of the rendered 2D node. See Applying custom rendering to 2D nodes and Applying custom rendering to an Image node.
kzWorldMatrix	mat4	A matrix that transforms from local coordinates to world (global) coordinates.
kzCameraMatrix	mat4	A matrix that transforms from world (global) coordinates to view (camera) coordinates, that is, applying camera.
kzCameraWorldMatrix	mat4	A premultiplied matrix: kzCameraMatrix * kzWorldMatrix.
kzProjectionCameraWorldMatrix	mat4	A premultiplied matrix: kzProjectionMatrix * kzCameraMatrix * kzWorldMatrix.
kzProjectionCameraMatrix	mat4	A premultiplied matrix: kzProjectionMatrix * kzCameraMatrix.
kzProjectionMatrix	mat4	A matrix that projects view coordinates into screen coordinates.
kzNormalMatrix	mat4	A matrix that transforms object normals to world coordinates.
kzCameraNormalMatrix	mat4	A premultiplied matrix: kzCameraMatrix * kzNormalMatrix.
kzCameraPosition	vec3	A camera location in world coordinates.
kzViewPosition	vec4	A homogeneous position for calculating the view direction: positionWorld.xyz * kzViewPosition.w - kzViewPosition.xyz.
kzTime	float	Debug timer, 1.0f = 1000 milliseconds.
kzTexture	sampler2D	A texture to apply to a brush or material.
kzTextureSize0	vec2	The size of the form (width, height) of the first texture in a shader.
kzTextureSize1	vec2	The size of the form (width, height) of the second texture in a shader.
kzTextureSize2	vec2	The size of the form (width, height) of the third texture in a shader.
kzTextureSize3	vec2	The size of the form (width, height) of the fourth texture in a shader.
kzMatrixPalette	vec4	An array of 4x3 matrices that Kanzi uses in vertex skinning. Each matrix is of the form: [ m00 m01 m02 translate_x] [ m10 m11 m12 translate_y] [ m20 m21 m22 translate_z]
kzCameraNearFarPlane	vec2	The near and far plane distances from camera.
kzMorphWeights[8]	float	An array of mesh weights that Kanzi uses in morphing.
kzViewport	vec4	A vector of the form (x, y, width, height) that represents the viewport to which Kanzi currently renders: x and y define the bottom-left corner of the viewport rectangle in pixels. width and height define the width and height of the viewport. By default, kzViewport maps to the Screen node of the application: x and y equal 0. width and height equal the width and height of the screen. When Kanzi renders to a composition target or to a 3D scene that accompanies a sub-rectangle of a larger area, kzViewport represents that target area.
kzWindowSize	vec2	The size (width, height) of the Screen node of the application.

Material uniforms

If the name of the uniform matches any of the property types defined in the material type of the shader, the value is supplied using the properties. At runtime the values for the properties are collected from the rendered material and the lights that match the light properties defined in the material type with possible property overriding.

The names and data types of the uniforms must match the names and data types of the property types in a material type. Note that the display name of a property type can be different from its real name that is used in this context. See Property types. For example, if the material type has a color property type Diffuse, the shader code must have this definition:

uniform mediump vec4 Diffuse;

The letters and the case must match in the names. These are the compatible data types from property data type to shader uniform data type:

Property data type	Shader uniform data type
Float	float
Vector 2D	vec2
Vector 3D	vec3
Color	vec4
Vector 4D	vec4
Matrix 2D	mat2
Matrix 3D	mat3
Matrix 4D	mat4
Texture	sampler1D sampler2D sampler3D sampler1DShadow sampler2DShadow samplerCube samplerCubeShadow

Uniform arrays for light property types

Light property types support uniform arrays. This enables you to use multiple lights of the same type. For example, if one shader program uses two directional lights, you must add an array property type into that shader of the material type:

uniform mediump vec4 DirectionalLightColor[2];
uniform mediump vec3 DirectionalLightDirection[2];

These property types support uniform arrays:

• DirectionalLightColor

• DirectionalLightDirection

• PointLightColor

• PointLightAttenuation

• PointLightPosition

• PointLightRadius

• SpotLightColor

• SpotLightPosition

• SpotLightDirection

• SpotLightAttenuation

• SpotLightCutoffAngle

• SpotLightConeParameters

• SpotLightExponent

• SpotLightRadius

Reusing shader code

You can reuse shader code by placing into separate shaders the functionality that you want to use in more than one shader. For example, that way you can include in a shader helper functions that you use in several shaders.

To reuse shader code:

1. In the Library > Resource Files press Alt and right-click Shaders, select Shader Source File, and name the shader file.

   For example, name the shader file MyHelperShader.

   

2. Double-click the shader file that you created and in the Shader Source Editor add the code that implements the functionality that you want to include in another shader file.

   For example, add a function that converts an RGB color value to grayscale:

   float colorToLuma(vec3 col)
   {
       return col.r * 0.2126 + col.g * 0.7152 + col.b * 0.0722;
   }
   

3. In the Library > Resource Files > Shaders double-click the shader file where you want to include another shader, and in the Shader Source Editor add the #include directive followed by a shader filename.

   Kanzi replaces the line where you add the #include directive with the content of the shader.

   For example, to include the shader MyHelperShader.glsl:

   ...
   
   #include "MyHelperShader.glsl"
   
   ...
   

Using shaders in the API

For details, see the ShaderProgram class in the Kanzi Engine API reference.

See also

Property types

Shaders best practices

Optimizing meshes