Property types reference¶
This table lists all default property types available in Kanzi. See Property system, Creating property types, and Node and resource reference.
Name |
Display Name |
Inherited |
Attachable |
Description |
|---|---|---|---|---|
Action.Delay |
Action Delay (ms) |
No |
No |
The time in milliseconds after which Kanzi invokes the action. |
ActivityConcept.Status |
Activity Status |
No |
Yes |
Defines the possible states of the Activity node when its Activity Host node activates or deactivates that Activity node. |
ActivityConcept.StatusChangedMessageArguments.Status |
Activity Status |
No |
No |
|
ActivityHostConcept.ActivationMessageArguments.ActivationPath |
Activation Path |
No |
No |
Sets the full or the remainder of the activation path of the Activity node that you want to activate. |
AlphaCutoff |
Alpha Cutoff |
No |
Yes |
Sets the cutoff threshold for alpha cutting. If the alpha value is less than the value of this property, Kanzi discards the fragment. The default value is 0.5. |
Ambient |
Ambient Color |
No |
Yes |
The color of the material when lights are not present. |
AnimationBindingProcessor.Animation |
Animation Item Path |
No |
No |
The animation binding processor applies this animation when the binding is updated. |
AnimationPlayer.AutoplayEnabled |
Autoplay Enabled |
No |
No |
Specifies whether animation player should start playback of its timeline automatically when it is attached to the node. |
AnimationPlayer.DurationScale |
Duration Scale |
No |
No |
Specifies how much duration of the timeline is scaled during its playback. |
AnimationPlayer.PlaybackMode |
Playback Mode |
No |
No |
Specifies the mode of timeline playback (normal, reverse, pingpong). |
AnimationPlayer.PlayMessageArguments.DurationScale |
Duration Scale |
No |
No |
Specifies how much duration of the timeline is scaled during its playback. This scale is applied on top of player's duration scale property. |
AnimationPlayer.PlayMessageArguments.PlaybackMode |
Playback Mode |
No |
No |
Specifies the mode of timeline playback (normal, reverse, pingpong). This mode is applied on top of player's mode property. |
AnimationPlayer.PlayMessageArguments.RepeatCount |
Repeat Count |
No |
No |
Specifies how many times the timeline is played during its playback (1 for one time playback, 0 for infinite amount of repeats). This repeat count is applied on top of player's repeact count property. |
AnimationPlayer.RelativePlayback |
Relative Playback |
No |
No |
Specifies whether animations are played in relative manner by adding animated value to target property value instead of replacing the property value. |
AnimationPlayer.RepeatCount |
Repeat Count |
No |
No |
Specifies how many times the timeline is played during its playback (1 for one time playback, 0 for infinite amount of repeats). |
AnimationPlayer.RestoreOriginalValuesAfterPlayback |
Restore Original Values After Playback |
No |
No |
Specifies whether animated properties return to their initial values after playback of the timeline ends. |
AnimationPlayer.Timeline |
Target Animation Timeline |
No |
No |
The target animation timeline. |
ApplyActivationAction.ActivationPath |
Activity Activation Path |
No |
No |
The activation path from the Activity Host, which is set as the target of this action, to the Activity node you want to activate. The activation path contains only the Activity nodes and the Activity Hosts nodes. |
ApplyActivationAction.ActivityHostPath |
Activity Host Path |
No |
No |
Path to the Activity Host node of the activated Activity node. |
BaseColorFactor |
Base Color Factor |
No |
Yes |
Sets the base color for the material. |
BaseColorTexture |
Base Color Texture |
No |
Yes |
Sets the texture that contains the base color for the material. Use the Base Color Factor property to filter the value from this texture. |
BindingItem.TargetPropertyType |
Target Property |
No |
Yes |
The binding target property |
BindingSourceItem.PropertyType |
Source Property |
No |
Yes |
The binding source property |
BlendIntensity |
Blend Intensity |
No |
Yes |
Controls the intensity of materials that are blended on top of an existing color. Attached property enables overriding of the blend intensity of the used materials at render pass or object node level. |
BlendMode |
Blend Mode |
No |
Yes |
Controls how blending is performed. Attached property enables overriding of the blend mode of the used materials at render pass or object node level. Use "Alpha: Automatic" setting to use premultiplied or non-premultiplied alpha depending on the value of "Use Premultiplied Alpha by Default" project setting. |
BlitRenderPass.Material |
Material |
No |
Yes |
Sets to the Material that you want a Blit Render Pass to use to blit one or more textures. |
BlitRenderPass.Texture0 |
Texture 0 |
No |
Yes |
Sets the first texture you want the Blit Render Pass to blit. |
BlitRenderPass.Texture1 |
Texture 1 |
No |
Yes |
Sets the second texture you want the Blit Render Pass to blit. |
BlitRenderPass.Texture2 |
Texture 2 |
No |
Yes |
Sets the third texture you want the Blit Render Pass to blit. |
BlitRenderPass.Texture3 |
Texture 3 |
No |
Yes |
Sets the fourth texture you want the Blit Render Pass to blit. |
BrdfLookUpTable |
BRDF Lookup Table |
No |
Yes |
Gets the Bidirectional Reflectance Distribution Function (BRDF) lookup table for the material. The BRDF table is a texture that contains precomputed information about how light reflects off a material. You can use it to improve rendering quality. |
Brush.BrushType |
Brush Type |
No |
Yes |
The type of the brush. |
Brush.HorizontalTiling |
Brush Horizontal Tiling |
No |
Yes |
Horizontal Tiling for the brush. Affects the scale of texture coordinates. |
Brush.ModulateColor |
Brush Modulate Color |
No |
Yes |
Modulation color for brush. Effects brush rendering that needs color modulation. |
Brush.VerticalTiling |
Brush Vertical Tiling |
No |
Yes |
Vertical Tiling for the brush. Affects the scale of texture coordinates. |
ButtonConcept.AutoClickInterval |
Auto Press Interval |
No |
Yes |
An interval in milliseconds after which a held down button sends a button click message. Set to 0 to disable. |
ButtonConcept.IndexInGroup |
Index In Group |
No |
Yes |
Defines the index in the group that the button will have. The group must have the button in its tree. The button searches for the group upwards. When the value is -1 the button picks the nearest group. |
ButtonConcept.IsPressed |
Is Down |
No |
Yes |
Whether the button is in down state. |
ButtonConcept.LongPressInterval |
Hold Interval |
No |
Yes |
Occurs when the button is in down state for the set amount of milliseconds. Set to 0 to disable. |
ButtonConcept.PressOnHover |
Down On Hover |
No |
Yes |
When enabled, holding a finger on a device screen and moving it over the button, the property transitions the button to the down state. |
ButtonConcept.ToggleState |
Toggle State |
No |
Yes |
The current toggle state of the toggle button. |
ButtonConcept.ToggleStateCount |
Toggle State Count |
No |
Yes |
The number of toggle states of the toggle button. |
Camera.AspectRatio |
Aspect Ratio |
No |
Yes |
The aspect ratio of the camera. |
Camera.AsymmetricFov |
Asymmetric FOV |
No |
Yes |
The field of view of the camera in degrees. Angles are in order left, right, up, and down. Angles to the right of the center and upwards of the center are positive. |
Camera.DisableAspectRatio |
Use Viewport Aspect Ratio |
No |
Yes |
Whether to use the aspect ratio setting from the viewport in render pass. If not, you can set the aspect ratio in the camera. |
Camera.Fov |
FOV |
No |
Yes |
The field of view of the camera in degrees. |
Camera.FovType |
FOV Type |
No |
Yes |
Defines the direction of the field of view to either x or y. |
Camera.OrthogonalCoordinateSystemType |
Orthogonal Type |
No |
Yes |
Defines the type of the orthogonal coordinate system. In the absolute mode the camera uses pixel coordinates. In the relative mode the camera displays an area whose width is -1..1 scaled with the value set by the Orthogonal Plane Size property. |
Camera.OrthogonalPlaneHeight |
Orthogonal Plane Size |
No |
Yes |
The value used for scaling the view area of a relative orthographic camera. |
Camera.ProjectionType |
Projection Type |
No |
Yes |
Defines the camera type to either perspective or orthographic camera. |
Camera.ZFar |
Z Far |
No |
Yes |
The distance of the camera far clipping plane. The camera shows only the objects that are closer than the value set in this property. |
Camera.ZNear |
Z Near |
No |
Yes |
The distance of the camera near clipping plane. The camera shows only the objects that are farther away than the value set in this property. |
ClearCoatNormalScale |
Clear Coat Normal Scale |
No |
Yes |
Sets the clear coat normal scale for the material. Use the scale to set the intensity of the Clear Coat Normal Texture. |
ClearCoatNormalTexture |
Clear Coat Normal Texture |
No |
Yes |
Sets the texture that contains a clear coat normal map for the material. Use the Clear Coat Normal Scale property to scale the texture value. |
ClearCoatRoughnessFactor |
Clear Coat Roughness Factor |
No |
Yes |
Sets the roughness of the outer clear coat layer for the material: 0 represents a smooth, glossy surface, and 1 represents a rough, diffuse surface. |
ClearCoatRoughnessTexture |
Clear Coat Roughness Texture |
No |
Yes |
Sets the texture that contains a clear coat roughness map for the material. Kanzi reads the roughness from the Green channel of the texture. Use the Clear Coat Roughness Factor property to scale the roughness from this texture. |
ClearCoatStrengthFactor |
Clear Coat Strength Factor |
No |
Yes |
Sets the clear coat strength for the material: 0 represents a material with no clear coat, and 1 represents a full strength clear coat. |
ClearCoatStrengthTexture |
Clear Coat Strength Texture |
No |
Yes |
Sets the texture that contains a clear coat strength map for the material. Kanzi reads the strength from the Red channel of the texture. Use the Clear Coat Strength Factor property to scale the strength from this texture. |
ClearRenderPass.ClearColor0 |
Clear Color 0 |
No |
Yes |
Sets the color that you want the Clear Render Pass to use to clear the first (default) color buffer. |
ClearRenderPass.ClearColor1 |
Clear Color 1 |
No |
Yes |
Sets the color that you want the Clear Render Pass to use to clear the second color buffer. |
ClearRenderPass.ClearColor2 |
Clear Color 2 |
No |
Yes |
Sets the color that you want the Clear Render Pass to use to clear the third color buffer. |
ClearRenderPass.ClearColor3 |
Clear Color 3 |
No |
Yes |
Sets the color that you want the Clear Render Pass to use to clear the fourth color buffer. |
ClearRenderPass.ClearDepth |
Clear Depth |
No |
Yes |
Sets the depth that you want the Clear Render Pass to use to clear the depth buffer. |
ClearRenderPass.ClearStencil |
Clear Stencil |
No |
Yes |
Sets the clear stencil that you want the Clear Render Pass to use to clear the stencil buffer. |
CodeBehindBase.CodeBehindSource |
Code Behind Source |
No |
Yes |
Sets the metaclass name of the code behind class for this Activity node. |
ColorBrush.Color |
Brush Color |
No |
Yes |
Color for brush. Set alpha to 0 to disable brush. |
Command.CommandMessageArguments.CommandArgumentProperty |
Command |
No |
No |
The command argument executed by a UI control |
Command.CommandProperty |
Command |
No |
Yes |
The command executed by a UI control |
ComposerFactoryName |
Engine Factory Name |
No |
Yes |
The factory name for this composer. Can be used to instantiate composer or render pass from plugin. |
CompositionTargetRenderPass.AddressingMode |
Addressing Mode |
No |
Yes |
Sets how Kanzi handles the texture coordinates of the automatically generated composition target textures outside of the [0, 0] - [1, 1] rectangle: - Repeat sets the texture to repeat outside of these coordinates. This is the default value. - Mirror sets the texture to repeat, but mirrors every other repetition. - Clamp confines the texture to these coordinates and outside of these texture coordinates repeats the edge texels of the texture. -Mirror once sets the texture to repeat once in the negative direction, and after that clamps the texture. |
CompositionTargetRenderPass.CompositionTarget0 |
Composition Target 0 |
No |
Yes |
Sets the first color target to which you want to render the result of the child render passes of this render pass. |
CompositionTargetRenderPass.CompositionTarget1 |
Composition Target 1 |
No |
Yes |
Sets the second color target to which you want to render the result of the child render passes of this render pass. |
CompositionTargetRenderPass.CompositionTarget2 |
Composition Target 2 |
No |
Yes |
Sets the third color target to which you want to render the result of the child render passes of this render pass. |
CompositionTargetRenderPass.CompositionTarget3 |
Composition Target 3 |
No |
Yes |
Sets the fourth color target to which you want to render the result of the child render passes of this render pass. |
CompositionTargetRenderPass.DepthCompareFunction |
Depth Compare Function |
No |
Yes |
Sets the comparison function to be used with comparison samplers of the Composition Target Render Pass' depth target. |
CompositionTargetRenderPass.DepthTarget |
Depth Target |
No |
Yes |
Sets the depth target to which you want to render the result of the child render passes of this render pass. |
CompositionTargetRenderPass.DepthTextureFormat |
Depth Texture Format |
No |
Yes |
Sets the format of the automatically created Result Depth Texture. |
CompositionTargetRenderPass.FilterMode |
Filter Mode |
No |
Yes |
Sets how Kanzi handles accessing the texture samples of the automatically generated composition target: - Nearest takes the color from the nearest sample. - Linear interpolates color from neighboring samples. This is the default value. |
CompositionTargetRenderPass.Height |
Height |
No |
Yes |
Sets the absolute height for the automatically created composition target textures. If this property is not set, the size is taken from the current composition stack state using the values of the Resolution Multiplier and Resolution Divisor properties. |
CompositionTargetRenderPass.MipmapMode |
Mipmap Mode |
No |
Yes |
Sets the mipmap mode of the automatically created composition target. To enable mipmaps set the property value to Linear or Nearest. Enabling mipmaps introduces the runtime cost of generating mipmaps after rendering. To disable mipmaps remove the property. |
CompositionTargetRenderPass.MultisampleLevel |
Multisample Level |
No |
Yes |
Sets the number of samples you want to use for each output pixel of the automatically generated composition target textures. To disable multisampling, remove the property or set the property value to 1. |
CompositionTargetRenderPass.PixelFormat0 |
Pixel Format 0 |
No |
Yes |
Sets on the GPU the target pixel format of the first automatically created composition target texture. |
CompositionTargetRenderPass.PixelFormat1 |
Pixel Format 1 |
No |
Yes |
Sets on the GPU the target pixel format of the second automatically created composition target texture. |
CompositionTargetRenderPass.PixelFormat2 |
Pixel Format 2 |
No |
Yes |
Sets on the GPU the target pixel format of the third automatically created composition target texture. |
CompositionTargetRenderPass.PixelFormat3 |
Pixel Format 3 |
No |
Yes |
Sets on the GPU the target pixel format of the fourth automatically created composition target texture. |
CompositionTargetRenderPass.ResolutionDivisor |
Resolution Divisor |
No |
Yes |
Sets the resolution divisor for the automatically created composition target textures. Together with the Resolution Multiplier property this property sets the size of the composition target in relation to the size of the current Viewport 2D node. |
CompositionTargetRenderPass.ResolutionMultiplier |
Resolution Multiplier |
No |
Yes |
Sets the resolution multiplier for the automatically created composition target textures. Together with the Resolution Divisor property this property sets the size of the composition target in relation to the size of the current Viewport 2D node. |
CompositionTargetRenderPass.ResolveImmediately |
Resolve Immediately |
No |
Yes |
Whether to resolve multisamples and generate mipmaps for the composition target texture immediately after rendering. By default the Composition Target Render Pass resolves multisamples and generates mipmaps immediately. When you continue rendering to the composition target in another Composition Target Render Pass that performs the resolve, disable this property. |
CompositionTargetRenderPass.ResultDepthTexture |
Result Depth Texture |
No |
Yes |
The depth texture to which the Composition Target Render Pass renders its content. |
CompositionTargetRenderPass.ResultTexture0 |
Result Texture 0 |
No |
Yes |
The first color texture to which the Composition Target Render Pass renders its content. |
CompositionTargetRenderPass.ResultTexture1 |
Result Texture 1 |
No |
Yes |
The second color texture to which the Composition Target Render Pass renders its content. |
CompositionTargetRenderPass.ResultTexture2 |
Result Texture 2 |
No |
Yes |
The third color texture to which the Composition Target Render Pass renders its content. |
CompositionTargetRenderPass.ResultTexture3 |
Result Texture 3 |
No |
Yes |
The fourth color texture to which the Composition Target Render Pass renders its content. |
CompositionTargetRenderPass.Width |
Width |
No |
Yes |
Sets the absolute width for the automatically created composition target textures. If this property is not set, the size is taken from the current composition stack state using the values of the Resolution Multiplier and Resolution Divisor properties. |
ConstraintInWorldCoordinates |
Constraint In World Coordinates |
No |
Yes |
Specifies if the object constraining is done in world coordinates (when false, done in local coordinates). |
ConstraintOrientation |
Constraint Orientation |
No |
Yes |
Makes an object node where the property is attached to obtain orientation from target object |
ConstraintPosition |
Constraint Position |
No |
Yes |
Makes an object node where the property is attached to obtain position from target object |
ContentLayoutConcept.DepthPadding |
Depth Padding |
No |
Yes |
Sets the padding spaces between the content and the front and back boundaries of the Content Layout 3D node. |
ContentLayoutConcept.HorizontalPadding |
Horizontal Padding |
No |
Yes |
Sets the padding spaces between the content and the left and right boundaries of the Content Layout node. |
ContentLayoutConcept.VerticalPadding |
Vertical Padding |
No |
Yes |
Sets the padding spaces between the content and the top and bottom boundaries of the Content Layout node. |
CubeMapRenderPass.CompositionTarget |
Composition Target |
No |
Yes |
Sets the target to which you want to render the result of this Cubemap Render Pass. |
CubeMapRenderPass.DepthCompareFunction |
Depth Compare Function |
No |
Yes |
Sets the comparison function to be used with comparison samplers of the Cubemap Render Pass' depth target. |
CubeMapRenderPass.DepthFormat |
Depth Format |
No |
Yes |
Sets the format of the automatically created depth render buffer used for the cubemap rendering. If this property is not set, the depth requirement and format are autodetected. |
CubeMapRenderPass.FilterMode |
Filter Mode |
No |
Yes |
Sets how Kanzi handles accessing the texture samples of the automatically generated composition cubemap target: - Nearest takes the color from the nearest sample. - Linear interpolates color from neighboring samples. This is the default value. |
CubeMapRenderPass.MipmapMode |
Mipmap Mode |
No |
Yes |
Sets the mipmap mode of the automatically created composition cubemap target. To enable mipmaps set the property value to Linear or Nearest. Enabling mipmaps introduces the runtime cost of generating mipmaps after rendering. To disable mipmaps remove the property. |
CubeMapRenderPass.OverrideCamera |
Override Camera |
No |
Yes |
Sets the Camera node that you want to use to render the nodes to the composition cubemap texture. To use the default Camera node in that Scene node, do not set the value for this property. |
CubeMapRenderPass.PixelFormat |
Pixel Format |
No |
Yes |
Sets on the GPU the target pixel format of the automatically created composition cubemap target textures. |
CubeMapRenderPass.Resolution |
Resolution |
No |
Yes |
Sets the dimensions of the automatically created composition cubemap target textures. The default value is 64. |
CubeMapRenderPass.ResolveImmediately |
Resolve Immediately |
No |
Yes |
Whether to generate mipmaps for the composition target texture immediately after rendering. By default the Cubemap Render Pass generates mipmaps immediately. When you continue rendering to the composition target in another Cubemap Render Pass that performs the resolve, disable this property. |
CubeMapRenderPass.ResultDepthTexture |
Result Depth Texture |
No |
Yes |
The cubemap depth texture to which the Cubemap Render Pass renders its content. |
CubeMapRenderPass.ResultTexture |
Result Texture |
No |
Yes |
The result cubemap texture that was rendered to by the Cubemap Render Pass. |
CustomAssetThumbnail |
Custom Asset Thumbnail |
No |
Yes |
When enabled, the asset will have selected image as thumbnail instead of the generated one. |
DataContext.DataContext |
Data Context |
No |
Yes |
Source of data for this node and its descendants |
DataContext.ItemsSource |
Items Source |
No |
Yes |
Data object which provides data sources for list items. |
DataDrivenExclusiveActivityHostConcept.ActiveItemIndex |
Active Index |
No |
Yes |
Index of the active Activity. To deactivate all Activity nodes, set to -1. |
DataDrivenExclusiveActivityHostConcept.ActivitySource |
Activity Source |
No |
Yes |
The data object that provides the data for this Activity node. |
DataDrivenExclusiveActivityHostConcept.ActivityTemplate |
Activity Template |
No |
Yes |
If set, the Data-Driven Exclusive Activity Host uses this prefab for Activity nodes that it creates. |
DataObjectValue |
Value |
No |
Yes |
The last read value of the data object |
Description |
Description |
No |
Yes |
Add a description of the purpose of this item. To export descriptions to a plain text file, select File > Export > Export Descriptions. When you export the kzb file, this description is not included in the exported file. |
DetailBaseColorFactor |
Detail Base Color Factor |
No |
Yes |
Sets the detail base color for the material. The detail base color is alpha blended with the standard base color. |
DetailBaseColorTexture |
Detail Base Color Texture |
No |
Yes |
Sets the detail texture that contains the base color for the material. Use the Detail Base Color Factor property to filter the value from this texture. The detail base color is alpha blended with the standard base color. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture. |
DetailClearCoatNormalScale |
Detail Clear Coat Normal Scale |
No |
Yes |
Sets the detail clear coat normal scale for the material. Use the scale to set the intensity of the Detail Clear Coat Normal Texture. |
DetailClearCoatNormalTexture |
Detail Clear Coat Normal Texture |
No |
Yes |
Sets the detail texture that contains a clear coat normal map for the material. Use the Detail Clear Coat Normal Scale property to scale the texture value. |
DetailClearCoatRoughnessTexture |
Detail Clear Coat Roughness Texture |
No |
Yes |
Sets the detail texture that contains a clear coat roughness map for the material. Use the Clear Coat Roughness Factor and Clear Coat Roughness Texture properties to scale the roughness from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture. |
DetailClearCoatStrengthTexture |
Detail Clear Coat Strength Texture |
No |
Yes |
Sets the detail texture that contains a clear coat strength map for the material. Kanzi reads the strength from the Red channel of the texture. Use the Clear Coat Strength Factor and Clear Coat Strength Texture properties to scale the strength from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture. |
DetailDiffuseFactor |
Detail Diffuse Color Factor |
No |
Yes |
Sets the detail diffuse color for the material. Kanzi alpha blends the detail diffuse color with the standard diffuse color. |
DetailDiffuseTexture |
Detail Diffuse Color Texture |
No |
Yes |
Sets the detail texture that contains the diffuse color for the material. Use the Detail Diffuse Color Factor property to filter the value from this texture. Kanzi alpha blends the detail diffuse color with the standard diffuse color. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture. |
DetailEmissiveFactor |
Detail Emissive Factor |
No |
Yes |
Sets the color of the light that is emitted from a detail texture for the material. This color affects the local material rendering, but the light is not cast to other objects. The detail emissive light is alpha blended with the standard emissive light. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture. |
DetailEmissiveTexture |
Detail Emissive Texture |
No |
Yes |
Sets the detail texture that contains the light emitted from the material. Use the Detail Emissive Factor property to scale the value from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture. |
DetailGlossinessTexture |
Detail Glossiness Texture |
No |
Yes |
Sets the detail texture that contains a glossiness map for the material. Kanzi reads the glossiness from the Alpha channel of this texture. Use the Glossiness Factor and Glossiness Texture properties to scale the glossiness from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture. |
DetailMetallicTexture |
Detail Metallic Texture |
No |
Yes |
Sets the detail texture that contains a metallic map for the material. Kanzi reads the metalness from the Blue channel of this texture. Use the Metallic Factor and Metallic Texture properties to scale the metalness from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture. |
DetailNormalScale |
Detail Normal Scale |
No |
Yes |
Sets the detail normal scale for the material. Use the scale to set the intensity of the Detail Normal Texture. |
DetailNormalTexture |
Detail Normal Texture |
No |
Yes |
Sets the detail texture that contains a normal map for the material. Use the Detail Normal Scale property to scale the texture value. |
DetailOcclusionStrength |
Detail Occlusion Strength |
No |
Yes |
Sets the detail occlusion strength for the material. Use the strength to set the intensity of the Detail Occlusion Texture. |
DetailOcclusionTexture |
Detail Occlusion Texture |
No |
Yes |
Sets the detail texture that contains an occlusion map for the material. Kanzi reads the occlusion from the Red channel of this texture. Use the Detail Occlusion Strength property to scale the occlusion from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture. |
DetailRoughnessTexture |
Detail Roughness Texture |
No |
Yes |
Sets the detail texture that contains a roughness map for the material. Kanzi reads the roughness from the Green channel of the texture. Use the Roughness Factor and Roughness Texture properties to scale the roughness from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture. |
DetailSpecularFactor |
Detail Specular Color Factor |
No |
Yes |
Sets the detail specular color for the material. Kanzi alpha blends the detail specular color with the standard specular color. |
DetailSpecularTexture |
Detail Specular Color Texture |
No |
Yes |
Sets the detail texture that contains the specular color for the material. Use the Detail Specular Color Factor property to filter the value from this texture. Kanzi alpha blends the detail specular color with the standard specular color. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture. |
DetailTextureOffset |
Detail Texture Offset |
No |
Yes |
Sets the detail texture offset for the material. Kanzi adds this value to the UVs to produce a second set of detail UVs to use for all detail texture properties. |
DetailTextureTiling |
Detail Texture Tiling |
No |
Yes |
Sets the detail texture tiling factor for the material. Kanzi multiplies this value by the UVs to produce a second set of detail UVs to use for all detail texture properties. |
Diffuse |
Diffuse Color |
No |
Yes |
The color of the material when it is lit by a light. |
DiffuseFactor |
Diffuse Color Factor |
No |
Yes |
Sets the diffuse color for the material. |
DiffuseTexture |
Diffuse Color Texture |
No |
Yes |
Sets the texture that contains the diffuse color for the material. Use the Diffuse Color Factor property to filter the value from this texture. |
DirectionalLight |
Directional Light |
No |
Yes |
Directional light settings |
DirectionalLightColor |
Directional Light Color |
No |
Yes |
Sets the color of the Directional Light. |
DispatchMessageAction.DefineTargetWithProperty |
Define Target with Property |
No |
Yes |
Define Target with Property |
DispatchMessageAction.RoutingTarget |
Target Item |
No |
No |
Specifies the target item to which the message is dispatched. If the target resides within the node tree, and the message type has tunneling and bubbling enabled, the message is tunneled and bubbled through the parents of the target. |
DispatchMessageAction.RoutingTargetLookup |
Property |
No |
No |
Allows to look up the target item using this property (RoutingTarget.Property). |
DockLayoutConcept.LastItemFill |
Last Item Fill |
No |
Yes |
Whether the last item of the dock layout is given the remaining free space. |
DockLayoutConcept.Side |
Side |
No |
Yes |
The docking side of an item in the dock layout. |
DrawObjectsRenderPass.Camera |
Camera |
No |
Yes |
Sets the Camera node that you want to use to render the nodes. To use the default Camera node in that Scene node, do not set the value for this property. |
DrawObjectsRenderPass.CameraMatrix |
Calculated Camera Matrix |
No |
Yes |
Camera matrix calculated during DrawObjectsRenderPass rendering. |
DrawObjectsRenderPass.DirectionalLights |
Directional Lights |
No |
Yes |
Use this property to bind the directional light set for rendering. |
DrawObjectsRenderPass.FrustumCullingEnabled |
Frustum Culling |
No |
Yes |
Enable to disable rendering objects that are not inside the view frustum. Trades GPU rendering time for CPU cull test time. |
DrawObjectsRenderPass.NearFarPlane |
Calculated Projection Near / Far Planes. |
No |
Yes |
Near / far planes calculated during DrawObjectsRenderPass rendering. |
DrawObjectsRenderPass.ObjectSource |
Object Source |
No |
Yes |
Sets the object source which collects the nodes that you want to render with this render pass. To render all nodes in a Scene node (Root Object Source), do not set the value for this property. |
DrawObjectsRenderPass.PointLights |
Point Lights |
No |
Yes |
Use this property to bind the point light set for rendering. |
DrawObjectsRenderPass.ProjectionMatrix |
Calculated Projection Matrix |
No |
Yes |
Projection matrix calculated during DrawObjectsRenderPass rendering. |
DrawObjectsRenderPass.SpotLights |
Spot Lights |
No |
Yes |
Use this property to bind the spot light set for rendering. |
DrawObjectsRenderPass.Viewport |
Rendering Viewport |
No |
Yes |
Viewport applied by DrawObjectsRenderPass rendering. |
DrawObjectsWithMaterialRenderPass.Material |
Material |
No |
Yes |
Sets the material that will be used to render all nodes rendered by this DrawObjectsWithMaterialRenderPass. |
Emissive |
Emissive Color |
No |
Yes |
The color of the light that is emitted from the material surface. |
EmissiveFactor |
Emissive Factor |
No |
Yes |
Sets the color of the light that is emitted from the material. This color affects the local material rendering, but the light is not cast to other objects. |
EmissiveTexture |
Emissive Texture |
No |
Yes |
Sets the texture that contains the light emitted from the material. Use the Emissive Factor property to scale the value from this texture. |
EnvironmentAmbientFactor |
Environment Ambient Factor |
No |
Yes |
Sets the strength of the cubemap texture to use for ambient environment light. Use the Environment Ambient Texture property to set the cubemap texture. The ambient environment light affects diffuse lighting in image based lighting. |
EnvironmentAmbientTexture |
Environment Ambient Texture |
No |
Yes |
Sets the cubemap to use for the ambient environment light for the material. This cubemap affects the diffuse lighting during image based lighting. Use the Environment Ambient Factor property to set the strength of the cubemap texture. |
EnvironmentReflectionFactor |
Environment Reflection Factor |
No |
Yes |
Sets the strength of the cubemap texture to use for specular environment light. Use the Environment Reflection Texture property to set the cubemap texture. The specular environment light affects reflective lighting in image based lighting. |
EnvironmentReflectionTexture |
Environment Reflection Texture |
No |
Yes |
Sets the cubemap to use for the specular environment light for the material. This cubemap affects reflective lighting during image based lighting. Use the Environment Reflection Factor property to set the strength of the cubemap texture. |
ExclusiveActivityHostConcept.ImplicitActivityChangeRequestMessageArguments.LoopActivity |
Loop Activity |
No |
No |
|
Exposure |
Exposure |
No |
Yes |
Sets the exposure compensation for the material. The exposure compensation emulates camera exposure by controlling the total amount of light rendered. Use a negative value to darken the rendered image, and a positive value to lighten the image. Exposure is exponential: 1.0 is twice as bright as 0.0, and -1.0 is half as bright as 0.0. |
ExpressionBindingProcessor.Argument1 |
Argument 1 |
No |
No |
The first argument in the binding expression. |
ExpressionBindingProcessor.Argument1Field |
Argument 1 Field |
No |
No |
The property attribute for the first argument. |
ExpressionBindingProcessor.Argument2 |
Argument 2 |
No |
No |
The second argument in the binding expression. |
ExpressionBindingProcessor.Argument2Field |
Argument 2 Field |
No |
No |
The property attribute for the second argument. |
ExpressionBindingProcessor.Argument3 |
Argument 3 |
No |
No |
The third argument in the binding expression. |
ExpressionBindingProcessor.Argument3Field |
Argument 3 Field |
No |
No |
The property attribute for the third argument. |
ExpressionBindingProcessor.Operation |
Operation |
No |
No |
The operation in the expression. |
ExpressionBindingProcessor.Output |
Output |
No |
No |
The temporary register to write the result to. |
ExpressionBindingProcessor.OutputField |
Output Field |
No |
No |
The property attribute of the output register. |
FaceToCamera |
Face to Camera |
No |
Yes |
Sets the node to rotate around all axes to turn towards the preview camera. FaceToCameraIsBillboarding and FaceToCameraCylindral affect how the node turns to the camera. |
FaceToCameraCylindral |
Face to Camera Cylindrical |
No |
Yes |
Sets the node to always turn to face the camera according to the cylinder on the y axis. |
FaceToCameraIsBillboarding |
Face to Camera is Billboarding |
No |
Yes |
Sets the node to rotate with the rotation of the preview camera. |
FaceToCameraTargetCamera |
Face To Camera Target Camera |
No |
Yes |
The target camera specified for the Face to Camera. When NULL, the property uses the Scene default camera. |
FlowLayoutConcept.PrimaryDirection |
Primary Direction |
No |
Yes |
The direction along which the layout arranges items until the layout limit in that direction is reached. |
FlowLayoutConcept.SecondaryDirection |
Secondary Direction |
No |
Yes |
The direction along which the flow layout arranges lines of the primary direction. |
FocusManager.CyclicFocusNavigation |
Cyclic Focus Navigation |
No |
Yes |
Sets whether the focus chain navigation within the focus scope is cyclic. When you enable this property: - When the user navigates in the forward direction and the focus reaches the last focusable UI element of the focus scope, the focus navigation moves to the first focusable UI element. - When the user navigates in the backward direction and the focus reaches the first focusable UI element of the focus scope, the focus navigation moves to the last focusable UI element. |
FocusManager.FocusOrder |
Focus Order |
No |
Yes |
Sets the focus chain order of the node within the focus scope. |
FocusManager.FocusScopeType |
Focus Scope Type |
No |
Yes |
Sets the type of the focus scope node: - Group groups focusable nodes. - Fence keeps the focus chain navigation inside the scope and does not allow the focus chain navigation to enter or leave that scope. - Modal blocks the key and touch input that originates outside of its boundaries and keeps the focus navigation within the scope boundaries. - Popup loses focus when the user input originates from a node that is outside of a node tree of that scope. |
FocusManager.ScopeStateChangeMessageArguments.ReasonValue |
Reason Value |
No |
No |
The reason the modal or popup focus scope state is changed: - Force Focus specifies that the focus scope is explicitly brought to front or sent to back. - Other Scope In Front specifies that the focus scope receiving the message is no longer the foremost focus because an other focus scope is brought to the front. - Scope Detached specifies that the focus scope is no longer the foremost scope because its root node is detached from the node tree. - Next In Stack specifies that the focus scope that received the message is brought to the front because it is the first focus scope in the focus scope stack that follows the focus scope that was sent to the back of the focus scope stack. - Other Focus Reason specifies other, custom focus reasons. |
FocusManager.SendScopeToBackMessageArguments.ReasonValue |
Reason Value |
No |
No |
The reason the modal or popup focus scope is sent to back: - Force Focus specifies that the focus scope is explicitly brought to front or sent to back. - Other Scope In Front specifies that the focus scope receiving the message is no longer the foremost focus because an other focus scope is brought to the front. - Other Focus Reason specifies other, custom focus reasons. |
FontStyleConcept.CharacterSpacing |
Character Spacing |
No |
Yes |
Sets the character spacing in pixels. |
FontStyleConcept.FixedCharacterWidth |
Fixed Character Width |
No |
Yes |
When set, overrides the font advance widths to make each character take a fixed amount of space specified in pixels. |
FontStyleConcept.FontHintingPreference |
Font Hinting Preference |
No |
Yes |
Sets the hinting preference of the font. - No hinting: Render text without hinting the outlines of glyphs. - Native hinting: Prefer native hinter of the font over the auto-hinter of the rasterizer. - Auto hinting: Prefer auto-hinter of the rasterizer over the native hinter of the font. |
FontStyleConcept.FractionalCharacterWidth |
Fractional Character Width |
No |
Yes |
Sets whether Kanzi uses fractional or rounded character widths to lay out text. In most cases fractional widths provide the best result. However, with small font sizes, fractional widths can cause the characters to run together or have too much space, making it difficult to read. - When enabled, Kanzi uses fractional character widths, which means that the spacing between characters varies and can be a fraction of a pixel. - When disabled, Kanzi uses character widths rounded to the nearest pixel. Disable fractional widths when you want to fix character spacing in whole-pixel increments and prevent characters in small font sizes from running together. |
FontStyleConcept.LineSpacing |
Line Spacing |
No |
Yes |
Sets the line spacing in multiples of the normal line height of the selected FontStyleConcept. |
FontStyleConcept.Size |
Font Size |
No |
Yes |
Sets the size of the font in pixels. |
FontStyleConcept.SnapCharacterToPixelProperty |
Snap Character To Pixel |
No |
Yes |
Sets whether Kanzi positions characters in 2D rendering to the nearest pixel: - When enabled, text sharpness improves, but some characters can shift a fraction of a pixel. - When disabled, certain combinations of screen resolution, use of anti-aliasing, and font size can cause the text to appear blurry. In that case, you can improve the appearance of the text with the Fractional Character Width and Character Spacing properties. |
FontStyleConcept.Style |
Font Style |
No |
Yes |
Sets the style of the FontStyleConcept. |
FontStyleConcept.Weight |
Font Weight |
No |
Yes |
Sets the weight of the FontStyleConcept. |
FrustumCullMargin |
Frustum Cull Margin |
No |
Yes |
The margin of the frustum cull radius of the node. For example, set the margin when a vertex shader modifies the geometry of the node. To use this property, enable the Frustum Culling property in the Draw Objects Render Pass you use to render the node. |
GatherLightsRenderPass.OutputDirectionalLights |
Output Directional Lights |
No |
Yes |
Kanzi uses this property to allow binding to directional light set. |
GatherLightsRenderPass.OutputPointLights |
Output Point Lights |
No |
Yes |
Kanzi uses this property to allow binding to point light set. |
GatherLightsRenderPass.OutputSpotLights |
Output Spot Lights |
No |
Yes |
Kanzi uses this property to allow binding to spot light set. |
GlobalAmbient |
Global Ambient Color |
No |
Yes |
The color that is multiplied automatically with the "Ambient" property of the materials in the scene. |
GlossinessFactor |
Glossiness Factor |
No |
Yes |
Sets the glossiness of the material: 0 represents a rough, diffuse surface, and 1 represents a smooth, glossy surface. |
GlossinessTexture |
Glossiness Texture |
No |
Yes |
Sets the texture that contains a glossiness map for the material. Kanzi reads the glossiness from the Alpha channel of this texture. Use the Glossiness Factor property to scale the glossiness from this texture. |
GlyphTexture |
Glyph Texture |
No |
Yes |
The automatic texture of the glyph cache. |
GridLayoutConcept.Column |
Column |
No |
Yes |
The column into which grid layout places the item. |
GridLayoutConcept.ColumnDefinitions |
Columns |
No |
Yes |
Defines the number of columns in a grid layout and how the grid layout distributes the content in columns. |
GridLayoutConcept.ColumnSpan |
Column Span |
No |
Yes |
Defines the number of columns an item in a grid layout occupies. |
GridLayoutConcept.Direction |
Layout Direction |
No |
Yes |
The direction in which the items are arranged when you add them to a grid layout. |
GridLayoutConcept.Row |
Row |
No |
Yes |
The row into which grid layout places the item. |
GridLayoutConcept.RowDefinitions |
Rows |
No |
Yes |
Defines the number of rows in a grid layout and how the grid layout distributes the content in rows. |
GridLayoutConcept.RowSpan |
Row Span |
No |
Yes |
Defines the number of rows an item in a grid layout occupies. |
GridListBoxConcept.CalculatedOffset |
Calculated Offset |
No |
Yes |
Current relative offset of object in a grid list box, in proportional range [0, 1]. |
GridListBoxConcept.CellHeight |
Cell Height |
No |
Yes |
Height of one list box cell |
GridListBoxConcept.CellWidth |
Cell Width |
No |
Yes |
Width of one list box cell |
GridListBoxConcept.Direction |
Layout Direction |
No |
Yes |
The direction in which the grid list box arranges its items. When you change the layout direction you also change the scroll axis of the grid list box. |
GridListBoxConcept.ItemAreaBegin |
Item Area Begin |
No |
Yes |
Proportional offset where the area meant for items starts |
GridListBoxConcept.ItemAreaEnd |
Item Area End |
No |
Yes |
Proportional offset where the area meant for items ends |
GridListBoxConcept.Scrolling |
Scrolling |
No |
Yes |
Is the grid list box currently scrolling (read-only). |
GridListBoxConcept.ScrollPosition |
Scroll Position |
No |
Yes |
Sets the scroll position of the Grid List Box along the x and y axes as a relative position within the list box area. Use this property to move the list to a scroll position immediately, without scrolling. To update the scroll position with a binding, use a two-way or to-source binding. |
GridListBoxConcept.ScrollSpeed |
Scroll Speed |
No |
Yes |
The current scroll speed of grid list box (read-only). |
GridListBoxConcept.ScrollTargetPosition |
Scroll Target Position |
No |
Yes |
The current target scroll value of the grid list box (read-only). |
GridListBoxDraggingAccelerationCoefficient |
Dragging Acceleration |
No |
Yes |
How fast scrolling accelerates when dragging in grid list box. |
GridListBoxDraggingDragCoefficient |
Dragging Drag |
No |
Yes |
How much drag affects scrolling when dragging in grid list box. |
GridListBoxDraggingImpulseFactor |
Dragging Impulse |
No |
Yes |
How much impulse is generated from pointing device movement when dragging in grid list box. |
GridListBoxMaximumNumberOfTouches |
Maximum Number of Touches |
No |
Yes |
Maximum number of touch points allowed for the scroll view pan in grid list box. |
GridListBoxMinimumNumberOfTouches |
Minimum Number of Touches |
No |
Yes |
Required number of touch points pressed for the scroll view pan to start in grid list box. Scroll view with minimum number of touches greater than one will preceed the inner scroll views in touch processing. |
GridListBoxRecognitionThreshold |
Recognition Threshold |
No |
Yes |
How much the pointing device has to move for scrolling to start in grid list box. |
GridListBoxSensitivity |
Scroll Sensitivity |
No |
Yes |
Sets the amount that the scroll position changes relative to the movement of the pointer. The default value 1 makes the Grid List Box scroll the same amount as the user drags the pointer. For example, to set the Grid List Box to scroll twice the amount that the user drags the pointer, set the value of the property to 2. |
GridListBoxSlidingAccelerationCoefficient |
Sliding Acceleration |
No |
Yes |
How fast scrolling accelerates when sliding in grid list box. |
GridListBoxSlidingDragCoefficient |
Sliding Drag |
No |
Yes |
How much drag affects scrolling when sliding in grid list box. |
GridListBoxSwipeDistance |
Swipe Distance |
No |
Yes |
How far a swipe sends the scroll value in grid list box, relative to pointing device speed. |
Image2D.Image |
Image |
No |
Yes |
The image to display. |
ImageFileNativePixelFormat |
Native Pixel Format |
No |
Yes |
Sets the native image format to use when exporting this image to the kzb file. Make sure that the graphics backend of your target device supports the format. |
Input.MessageArgument.CapsLock |
Caps Lock |
No |
No |
Sets whether Caps Lock is on during the key event. |
Input.MessageArgument.Key |
Key |
No |
No |
Sets the target logical key to handle. |
Input.MessageArgument.KeyModifiers |
Key Modifiers |
No |
No |
Sets the target key modifiers to handle. |
Input.MessageArgument.NavigationDirection |
Navigation Direction |
No |
No |
The navigation direction. |
InputMessageArguments.HitTest.Point |
Hit Test Point |
No |
No |
|
InputMessageArguments.HitTest.RayDirection |
Hit Test Ray Direction |
No |
No |
|
InputMessageArguments.HitTest.RayOrigin |
Hit Test Ray Origin |
No |
No |
|
InputMessageArguments.Manipulator.Point |
Manipulator Point |
No |
No |
|
InputMessageArguments.Manipulator.RayDirection |
Manipulator Ray Direction |
No |
No |
|
InputMessageArguments.Manipulator.RayOrigin |
Manipulator Ray Origin |
No |
No |
|
Instantiator3D.Node |
Instantiated Node |
No |
No |
Sets the node that this Instantiator node replicates. |
IsAssetInAssetPackage |
Export in Asset Package |
No |
Yes |
When enabled, this item is exported into asset package if this project is saved as one. |
IsDisabled |
Disable KZB Export |
No |
Yes |
Disables the exporting of the item into KZB. Can be used for, e.g. letting items out from certain profiles. The disabled items are always included in preview. |
IsUsedByCode |
Is Used by Code |
No |
Yes |
Whether or not the application code uses this asset. Used for determining unused assets. |
KeyManipulatorComponent.CapsLock |
Caps Lock |
No |
Yes |
Sets the Caps Lock value of the key manipulator. If the value is not set, Caps Lock state is ignored. |
KeyManipulatorComponent.KeyModifier |
Key Modifiers |
No |
Yes |
Sets the key modifiers of the key manipulator. The default value is Undefined. |
KeyManipulatorComponent.LogicalKey |
Logical Key |
No |
No |
Sets the logical key value of the key manipulator. |
LegacyRenderPass.Color0FloatClearValue |
Color Buffer 0 Clear Value (float) |
No |
Yes |
Clear color value for signed integer color buffer 0 |
LegacyRenderPass.Color0IntegerClearValue |
Color Buffer 0 Clear Value (integer) |
No |
Yes |
Clear color value for integer color buffer 0 |
LegacyRenderPass.Color1ColorClearValue |
Clear Color (Color Buffer 1) |
No |
Yes |
The color used to clear the color buffer 1 |
LegacyRenderPass.Color1FloatClearValue |
Color Buffer 1 Clear Value (float) |
No |
Yes |
Clear color value for signed integer color buffer 1 |
LegacyRenderPass.Color1IntegerClearValue |
Color Buffer 1 Clear Value (integer) |
No |
Yes |
Clear color value for integer color buffer 1 |
LegacyRenderPass.Color2ColorClearValue |
Clear Color (Color Buffer 2) |
No |
Yes |
The color used to clear the color buffer 2 |
LegacyRenderPass.Color2FloatClearValue |
Color Buffer 2 Clear Value (float) |
No |
Yes |
Clear color value for signed integer color buffer 2 |
LegacyRenderPass.Color2IntegerClearValue |
Color Buffer 2 Clear Value (integer) |
No |
Yes |
Clear color value for integer color buffer 2 |
LegacyRenderPass.Color3ColorClearValue |
Clear Color (Color Buffer 3) |
No |
Yes |
The color used to clear the color buffer 3 |
LegacyRenderPass.Color3FloatClearValue |
Color Buffer 3 Clear Value (float) |
No |
Yes |
Clear color value for signed integer color buffer 3 |
LegacyRenderPass.Color3IntegerClearValue |
Color Buffer 3 Clear Value (integer) |
No |
Yes |
Clear color value for integer color buffer 3 |
LegacyRenderPass.ColorBufferClearColor |
Clear Color (Color Buffer 0) |
No |
Yes |
The color used to clear the color buffer 0 |
LegacyRenderPass.ColorBufferClearEnabled |
Color Clear Enabled |
No |
No |
Whether to clear the color buffer before writing the new color values. |
LegacyRenderPass.ColorWriteMode |
Color Write Mode |
No |
No |
When set to None, writing to color buffer is disabled. |
LegacyRenderPass.ComposerEnabled |
Enabled |
No |
Yes |
This determines if composer is rendered (enabled by default). |
LegacyRenderPass.CullMode |
Cull Mode |
No |
No |
Sets the culling of the triangle faces in the rendered meshes of legacy render passes: - Back does not render the triangles whose normal points away from the camera. - Front does not render the triangles whose normal points towards the camera. |
LegacyRenderPass.DepthBufferClearEnabled |
Depth Clear Enabled |
No |
No |
Sets whether to clear the depth buffer. |
LegacyRenderPass.DepthBufferClearValue |
Depth Clear Value |
No |
No |
The value used for clearing the depth buffer. |
LegacyRenderPass.DepthBufferTestEnabled |
Depth Test Enabled |
No |
No |
Whether to enable the depth test. |
LegacyRenderPass.DepthBufferWriteEnabled |
Depth Write Enabled |
No |
No |
Sets whether to enable the writing of the depth buffer. |
LegacyRenderPass.FlushAfterRender |
Flush After Render |
No |
Yes |
This determines if GPU pipeline is flushed after rendering of this composer has occurred, to prevent GPU pipeline stall. |
LegacyRenderPass.FrustumCullingOn |
Frustum Culling |
No |
No |
Sets whether to use frustum culling. When frustum culling is enabled Kanzi does not render the objects that do not overlap with the viewing frustum of the camera. |
LegacyRenderPass.RenderOnce |
Render Once |
No |
No |
Sets whether this render pass is rendered only once. When disabled this render passes renders every frame. |
LegacyRenderPass.RenderPassCamera |
Camera |
No |
No |
The camera that is used for rendering this render pass. When set to "Scene Default Camera" Kanzi uses the default camera node from the active scene. |
LegacyRenderPass.RenderPassMaterial |
Override Material |
No |
No |
The material that overrides all the materials in the objects that are rendered by this render pass. When set to "No Material" material overriding is not in use. |
LegacyRenderPass.RenderPassObjectSource |
Object Source |
No |
No |
The object source for the render pass |
LegacyRenderPass.RenderPassRenderTargetColor0 |
Render Target Color0 |
No |
Yes |
Sets where this render pass renders. You can set a render pass to render to screen or to a render target color0 attachment texture. |
LegacyRenderPass.RenderPassRenderTargetColor1 |
Render Target Color1 |
No |
Yes |
Sets where this render pass renders. You can set a render pass to render to screen or to a render target color1 attachment texture. |
LegacyRenderPass.RenderPassRenderTargetColor2 |
Render Target Color2 |
No |
Yes |
Sets where this render pass renders. You can set a render pass to render to screen or to a render target color2 attachment texture. |
LegacyRenderPass.RenderPassRenderTargetColor3 |
Render Target Color3 |
No |
Yes |
Sets where this render pass renders. You can set a render pass to render to screen or to a render target color3 attachment texture. |
LegacyRenderPass.RenderPassRenderTargetDepthStencil |
Render Target Depth Stencil |
No |
Yes |
Render Target Depth Stencil |
LegacyRenderPass.RenderPassRenderTargetGenerateMipmap |
Generate Mipmaps |
No |
No |
Sets whether the render target texture generates mipmaps after the render pass. |
LegacyRenderPass.RenderPassRenderTargetInvalidateAttachments |
InvalidateAttachments |
No |
Yes |
Which attachments, if any, should be invalidated after the render pass. |
LegacyRenderPass.RenderPassRenderTargetMipmapLevel |
Mipmap Level |
No |
No |
Render Target Mipmap Level |
LegacyRenderPass.RenderPassRenderTargetResolve |
Resolve After |
No |
No |
Sets whether the render target is multisample resolved after the render pass. When you want to apply multisampling, enable this property only in the last render pass. |
LegacyRenderPass.RenderPassScissorEnabled |
Scissor Enabled |
No |
No |
Whether scissor area is enabled in render pass or not. When scissor area is enabled rendering is done only inside the specified scissor area. |
LegacyRenderPass.RenderPassScissorType |
Scissor Type |
No |
No |
Whether the border settings of the scissor area are relative (range 0-1) or absolute (pixel coordinates). |
LegacyRenderPass.StencilBufferClearEnabled |
Stencil Clear Enabled |
No |
No |
Sets whether to clear the stencil buffer. |
LegacyRenderPass.StencilBufferClearValue |
Stencil Clear Value |
No |
No |
The value used for clearing the stencil buffer. |
LegacyRenderPass.StencilBufferTestEnabled |
Stencil Test Enabled |
No |
No |
Whether or not the stencil test is enabled |
LegacyRenderPass.StencilFailOperation |
Stencil Fail Operation |
No |
No |
Operation that is performed when the stencil test fails. |
LegacyRenderPass.StencilFunction |
Stencil Function |
No |
No |
The function used to control whether a fragment is discarded by the stencil test. |
LegacyRenderPass.StencilFunctionReferenceMask |
Stencil Function Reference Mask |
No |
No |
Specifies a mask in legacy render passes that is ANDed with both the reference value and the stored stencil value when the test is done |
LegacyRenderPass.StencilFunctionReferenceValue |
Stencil Function Reference Value |
No |
No |
Specifies the reference value for the stencil test in legacy render passes. |
LegacyRenderPass.StencilPassDepthFailOperation |
Stencil Pass Depth Fail Operation |
No |
No |
Operation that is performed when the stencil test fails and the depth test passes. |
LegacyRenderPass.StencilPassDepthPassOperation |
Stencil Pass Depth Pass Operation |
No |
No |
Operation that is performed when both the stencil and depth test pass. |
LegacyRenderPass.ViewportType |
Viewport Type |
No |
No |
When absolute, the viewport settings are read in pixel coordinates, when relative the settings are read as proportional values from top-left (0,0) corner to bottom-right (1,1) corner. |
LevelOfDetail3D.MinimumArea |
Minimum Area |
No |
Yes |
When using #LodTypeScreenArea in the parent level of detail, use this property in the child of the level of detail to set the minimum screen area covered by the child in proportion to the screen size in range [0, 1]. |
LevelOfDetail3D.MinimumDistance |
Minimum Distance |
No |
Yes |
When using #LodTypeDistance in the parent level of detail, use this property in the child of the level of detail to set the minimum distance from the camera to the level of detail in range [0, Inf]. |
LevelOfDetail3D.Type |
Type |
No |
No |
Defines the type of the level of detail: - Distance sets the level of detail to use the minimum z distance from the camera to the level of detail. - Screen area sets the level of detail to use the minimum screen area covered by the child node in proportion to the screen size. |
LightEnabled |
Light Enabled |
No |
Yes |
Whether the light is switched on or off. Only lights that are switched on affect rendering. |
LightPropertyType |
Light Type Name |
No |
Yes |
The property type name of the light. |
ListBoxConcept.ItemContainerGeneratorTypeName |
Item Container Generator |
No |
Yes |
Name of the item container generator type to use for providing item containers dynamically for the list box. |
ListBoxConcept.ItemContainerTemplate |
Item Container Template |
No |
Yes |
If set, the default item container generator uses this to instantiate item containers. |
ListBoxConcept.ItemCount |
Item Count |
No |
Yes |
Reports the number of items in the List Box, including virtual items. |
ListBoxConcept.ItemGeneratorTypeName |
Item Generator |
No |
Yes |
Name of the item generator type to use for providing items dynamically to the list box. |
ListBoxConcept.ItemMessageArguments.ItemIndex |
Item Index |
No |
No |
Reports the index of the List Box item. |
ListBoxConcept.ItemSelectedMessageArguments.PreviousSelectedItemIndex |
Previous Selection |
No |
No |
Reports the index of the previously selected List Box item. The value -1 indicates that no item was selected. |
ListBoxConcept.ItemSelectedMessageArguments.SelectedItemIndex |
Selection |
No |
No |
Reports the index of the selected List Box item. The value -1 indicates that no item is selected. |
ListBoxConcept.ItemTemplate |
Item Template |
No |
Yes |
If set, the list item generator uses this to instantiate items. |
ListBoxConcept.KeepAliveItemCount |
Keep Alive Item Count |
No |
Yes |
Size of the buffer for invisible list box items. Invisible items that don't fit the buffer are returned to the Object Generator. |
ListBoxConcept.SelectedItemIndex |
Selected Item Index |
No |
Yes |
Index of the item that is currently selected in a List Box node. A List Box node updates this property when the user scrolls that List Box node. By setting the value of this property to the index of the item that you want to select in a List Box, you can select that item. |
ListBoxConcept.SelectionBehavior |
Selection Behavior |
No |
Yes |
Specifies the behavior for the list box scroll when an item is clicked. |
ListBoxItemContainer.ItemIndex |
Item Index |
No |
Yes |
Reports the index of the item in the List Box Item Container. |
ListBoxItemContainer.Selected |
Selected |
No |
Yes |
Indicates whether the List Box item held by this List Box Item Container is selected. The List Box sets the value of this property. |
ListBoxScrollingConcept.ScrollMessageArguments.ScrollPosition |
Scroll Position |
No |
No |
Reports the scroll position in the Scroll View within the List Box. |
ListBoxScrollingConcept.ScrollMessageArguments.ScrollSpeed |
Scroll Speed |
No |
No |
Reports the scroll speed in the Scroll View within the List Box. |
ListBoxScrollingConcept.UserScrollStartedMessageArguments.ItemIndex |
Item Index |
No |
No |
Reports the index of the List Box item where the user started scrolling. |
LongPressManipulatorComponent.LongPressDuration |
Long Press Duration |
No |
No |
Sets the duration of the press required for the installed long-press manipulator to recognize the long-press gesture and to set off the Long Press trigger. |
LookAt |
Look At |
No |
Yes |
Makes a node to always face the node set in this property. |
MaskTexture |
Mask Texture |
No |
Yes |
The texture for masking other texture or color. |
MaskTextureOffset |
Mask Texture Offset |
No |
Yes |
Sets an offset for mask in materials. |
MaskTextureTiling |
Mask Texture Tiling |
No |
Yes |
Determines the number of times a mask is presented in a material |
MaterialBrush.Material |
Material |
No |
Yes |
Material used when drawing with the brush |
MaterialSetupRenderPass.Material |
Material |
No |
Yes |
Sets the material that will have all other Material Setup Render Pass properties set to. |
MeshMorphTargetWeight |
Weight |
No |
No |
A weight value for a morph target |
Message.IsRepeat |
Is Repeat |
No |
No |
Whether the key press is a repeat caused by the user holding down a keyboard key. |
MessageArgument.FocusReason |
Focus Reason |
No |
No |
Sets the focus reason: - Force Focus. Focus was forced on the node. - Focus Chain Navigation. Focus was moved as a result of navigation in the focus chain. - Node Disabled. The Enabled or Visible property of the node with the focus was set to disabled. - Node Enabled. The Enabled or Visible property of the node with the focus was set to enabled. - Other Focus Reason. The focus is moved by means other than Tab or backtab keys, or tap or mouse button press. |
MessageArgument.Key |
Key |
No |
No |
Sets the target logical key. |
MessageArgument.Page.Navigate.Immediate |
Immediate |
No |
No |
Whether to navigate to the page instantly, without playing a transition animation. |
MessageArgument.PropertyTargetEasingInterpolator.SetEnabled.Enabled |
Enabled |
No |
No |
Sets whether the Property Target Easing Interpolator attached to the Target Item interpolates the value of the Interpolated Property Type. |
MessageArgument.Screen.ActivateThemeMessageArguments.Theme |
Theme |
No |
No |
Theme to activate |
MessageArgument.ScrollView.ScrollDirection |
Scroll Direction |
No |
No |
Sets the scrolling direction for a Scroll View node. |
MessageArgument.ScrollView.ScrollEdge |
Scroll Edge |
No |
No |
Set the direction in which a Scroll View node scrolls when you instruct it to scroll to either of the edges. |
MessageArgument.ScrollView.ScrollPage |
Scroll Page |
No |
No |
Sets the direction in which a Scroll View node scrolls when you instruct it to scroll by the layout height of that Scroll View node. |
MessageArgument.ScrollView.ScrollPosition |
Position |
No |
No |
Sets the x and y axis coordinates for the new scroll position of a Scroll View node. |
MessageArgument.ScrollView.ScrollPositionX |
Position X |
No |
No |
Sets the x axis coordinate for the new scroll position of a Scroll View node. |
MessageArgument.ScrollView.ScrollPositionY |
Position Y |
No |
No |
Sets the y axis coordinate for the new scroll position of a Scroll View node. |
MessageArgument.ScrollView.ScrollSpeed |
Speed |
No |
No |
Sets the scrolling speed of a Scroll View node. |
MessageArgument.ScrollView.ScrollTarget |
Scroll Target |
No |
No |
Sets the target position for a Scroll View node. |
MessageArgument.ScrollView.SnapDirection |
Snap Direction |
No |
No |
Sets the direction of a snap request. |
MessageArgument.ScrollView.SnapPosition |
Snap Position |
No |
No |
Sets the target of a snap request. |
MessageArgument.ScrollView.Zoom |
Zoom |
No |
No |
Sets the zoom level for a Scroll View node. |
MessageArgument.StateManager.EnteredState |
State |
No |
No |
State Manager State Entered |
MessageArgument.StateManager.Immediate |
Immediate |
No |
No |
Whether to change the state instantly, without playing a transition animation. |
MessageArgument.StateManager.LeftState |
State |
No |
No |
State Manager State Left |
MessageArgument.StateManager.LoopStates |
Loop State |
No |
No |
Whether to go back to the first state after reaching the last state. |
MessageArgument.StateManager.ShowStateManagerOnly |
Show only items that have state manager |
No |
Yes |
Show only items that have state manager |
MessageArgument.StateManager.SourceState |
Source State |
No |
No |
Source State for the transition |
MessageArgument.StateManager.State |
State |
No |
No |
State Manager State |
MessageArgument.StateManager.StateDefinedInCode |
State defined in code |
No |
Yes |
State defined in code |
MessageArgument.StateManager.StateGroup |
State Group |
No |
No |
The state group that contains the state to which you want to transition. |
MessageArgument.StateManager.StateSelectorPlaceholder |
State |
No |
Yes |
Target state for dispatched message action |
MessageArgument.StateManager.TargetState |
Target State |
No |
No |
Target State for the transition |
MessageTrigger.MessageSource |
Message Source |
No |
No |
A filter that makes possible to intercept events only for a certain source node. Empty string intercepts messages from all sources. |
MessageTrigger.RoutingMode |
Routing Mode |
No |
No |
The routing phase where the message is going to be intercepted. |
MessageTrigger.SetHandled |
Set Message Handled |
No |
No |
When enabled the trigger intercepts the message, marks it as handled, and prevents further message delivery. |
MetallicFactor |
Metallic Factor |
No |
Yes |
Sets the metalness of the material: 0 represents a non-metallic or dielectric object, and 1 represents a metallic object. |
MetallicTexture |
Metallic Texture |
No |
Yes |
Sets the texture that contains a metallic map for the material. Kanzi reads the metalness from the Blue channel of this texture. Use the Metallic Factor property to scale the value from this texture. |
Model3D.DrawnAsBoundingBox |
Drawn as Bounding Box |
No |
Yes |
When enabled the object is drawn its solid bounding box. |
Model3D.Material |
Material |
No |
Yes |
Use this material to override the materials defined in the clusters of the mesh. |
Model3D.Mesh |
Mesh |
No |
No |
The mesh resource used by the model. |
MoveFocusAction.Direction |
Direction |
No |
No |
Direction to which the focus is transferred in the focus navigation chain. |
MultiClickManipulatorComponent.ClickCount |
Click Count |
No |
No |
Sets the number of clicks or taps required for the installed multi-click manipulator to recognize the multi-click gesture and to set off the Multi-Click trigger. The default value is 2. |
MultiClickManipulatorComponent.SendIntermediateClickMessages |
Send Intermediate Click Messages |
No |
Yes |
Sets whether to send Intermediate Click messages until the desired click count is reached. |
MultiClickManipulatorComponent.Timeout |
Multi-Click Timeout |
No |
No |
Sets the time in milliseconds within which two consecutive clicks or taps must occur for the multi-click manipulator to continue recognizing them as the multi-click gesture. The default value is 250 ms. |
NavigationManipulatorComponent.DownNavigationKey |
Down Navigation Key |
No |
Yes |
Sets the logical key value of the down navigation. |
NavigationManipulatorComponent.DownNavigationKeyModifier |
Down Navigation Key Modifier |
No |
Yes |
Sets the key modifiers of the down navigation. The default value is Undefined. |
NavigationManipulatorComponent.EndNavigationKey |
End Navigation Key |
No |
Yes |
Sets the logical key value of the end navigation. |
NavigationManipulatorComponent.EndNavigationKeyModifier |
End Navigation Key Modifier |
No |
Yes |
Sets the key modifiers of the end navigation. The default value is Undefined. |
NavigationManipulatorComponent.HomeNavigationKey |
Home Navigation Key |
No |
Yes |
Sets the logical key value of the home navigation. |
NavigationManipulatorComponent.HomeNavigationKeyModifier |
Home Navigation Key Modifier |
No |
Yes |
Sets the key modifiers of the home navigation. The default value is Undefined. |
NavigationManipulatorComponent.LeftNavigationKey |
Left Navigation Key |
No |
Yes |
Sets the logical key value of the left direction navigation. |
NavigationManipulatorComponent.LeftNavigationKeyModifier |
Left Navigation Key Modifier |
No |
Yes |
Sets the key modifiers of the left direction navigation. The default value is Undefined. |
NavigationManipulatorComponent.PageDownNavigationKey |
Page Down Navigation Key |
No |
Yes |
Sets the logical key value of the page-down navigation. |
NavigationManipulatorComponent.PageDownNavigationKeyModifier |
Page Down Navigation Key Modifier |
No |
Yes |
Sets the key modifiers of the page-down navigation. The default value is Undefined. |
NavigationManipulatorComponent.PageUpNavigationKey |
Page Up Navigation Key |
No |
Yes |
Sets the logical key value of the page-up navigation. |
NavigationManipulatorComponent.PageUpNavigationKeyModifier |
Page Up Navigation Key Modifier |
No |
Yes |
Sets the key modifiers of the page-up navigation. The default value is Undefined. |
NavigationManipulatorComponent.RightNavigationKey |
Right Navigation Key |
No |
Yes |
Sets the logical key value of the right direction navigation. |
NavigationManipulatorComponent.RightNavigationKeyModifier |
Right Navigation Key Modifier |
No |
Yes |
Sets the key modifiers of the right direction navigation. The default value is Undefined. |
NavigationManipulatorComponent.UpNavigationKey |
Up Navigation Key |
No |
Yes |
Sets the logical key value of the up navigation. |
NavigationManipulatorComponent.UpNavigationKeyModifier |
Up Navigation Key Modifier |
No |
Yes |
Sets the key modifiers of the up navigation. The default value is Undefined. |
NinePatchImage2D.ImageBottom |
Bottom Image |
No |
Yes |
The image to use in middle of the bottom row. |
NinePatchImage2D.ImageBottomLeft |
Bottom-Left Image |
No |
Yes |
Image to use in the bottom-left corner. |
NinePatchImage2D.ImageBottomRight |
Bottom-Right Image |
No |
Yes |
The image to use in the bottom-right corner. |
NinePatchImage2D.ImageCenter |
Center Image |
No |
Yes |
The image to use in the center. |
NinePatchImage2D.ImageLeft |
Left Image |
No |
Yes |
The image to use in the center-left. |
NinePatchImage2D.ImageRight |
Right Image |
No |
Yes |
The image to use in the center-right. |
NinePatchImage2D.ImageTop |
Top Image |
No |
Yes |
The image to use in the middle of the top row. |
NinePatchImage2D.ImageTopLeft |
Top-Left Image |
No |
Yes |
The image to use in the top-left corner. |
NinePatchImage2D.ImageTopRight |
Top-Right Image |
No |
Yes |
The image to use in the top-right corner. |
NinePatchImage2D.StretchTypeBottom |
Stretch Type Bottom |
No |
Yes |
Control the display of the bottom image: - Stretch. Scale the image to fill the space between the bottom-left and bottom-right images. - Wrap. When the width of the space between the bottom-left and bottom-right images exceeds the width of the image, either extend the last column of pixels in the image or tile the image. Depends on the value of the texture's Wrap Mode property. |
NinePatchImage2D.StretchTypeCenter |
Stretch Type Center |
No |
Yes |
Control the display of the center image: - Stretch. Scale the image to fill the width and height of the center of the nine patch image. - Wrap. When the height and width of the center exceed the size of the image, either extend the last row or column of pixels in the image or tile the image. Depends on the value of the texture's Wrap Mode property. |
NinePatchImage2D.StretchTypeLeft |
Stretch Type Left |
No |
Yes |
Control the display of the left image: - Stretch. Scale the image to fill the space between the top-left and bottom-left images. - Wrap. When the height of the space between the top-left and bottom-left images exceeds the height of the image, either extend the last row of pixels in the image or tile the image. Depends on the value of the texture's Wrap Mode property. |
NinePatchImage2D.StretchTypeRight |
Stretch Type Right |
No |
Yes |
Control the display of the right image: - Stretch. Scale the image to fill the space between the top-right and bottom-right images. - Wrap. When the height of the space between the top-right and bottom-right images exceeds the height of the image, either extend the last row of pixels in the image or tile the image. Depends on the value of the texture's Wrap Mode property. |
NinePatchImage2D.StretchTypeTop |
Stretch Type Top |
No |
Yes |
Control the display of the top image: - Stretch. Scale the image to fill the space between the top-left and top-right images. - Wrap. When the width of the space between the top-left and top-right images exceeds the width of the image, either extend the last column of pixels in the image or tile the image. Depends on the value of the texture's Wrap Mode property. |
Node.ActualDepth |
Actual Layout Depth |
No |
Yes |
The calculated size of the node in depth direction when used in a layout. |
Node.ActualHeight |
Actual Layout Height |
No |
Yes |
The calculated height of the node when used in a layout. |
Node.ActualWidth |
Actual Layout Width |
No |
Yes |
The calculated width of the node when used in a layout. |
Node.ClipChildren |
Clip Children |
No |
Yes |
Sets whether to clip the child nodes of thos node. Kanzi clips the child nodes whose bounding box is completely outside of the bounding box of their parent node. Use this property with layout nodes. The child nodes can use only translation transformation. |
Node.ContentStretch |
Content Stretch |
No |
Yes |
Sets how the content that belongs to this node is stretched (as opposed to manipulating the actual node size). |
Node.Depth |
Layout Depth |
No |
Yes |
The size of the node in depth direction when used in a layout. Overrides the default bounds of the item. |
Node.DepthAlignment |
Depth Alignment |
No |
Yes |
The alignment in depth direction the node should use when it resides under a layout. |
Node.DepthMargin |
Depth Margin |
No |
Yes |
Sets the depth distance between this node and other nodes that are adjacent to this node in a layout. To set the Depth Margin property fields in a binding use: - Vector_X to access the Back property field - Vector_Y to access the Front property field |
Node.EnableClick |
Click Enabled |
No |
Yes |
Whether to install a click manipulator that generates click messages. |
Node.EnableMultiClick |
Double-Click Enabled |
No |
Yes |
Whether to install a multi-click manipulator that generates double-click messages. |
Node.Focusable |
Focusable |
No |
Yes |
Indicates whether the node can receive focus. |
Node.Focused |
Focused |
No |
Yes |
Indicates whether the node has focus. |
Node.FontFamily |
Font Family |
No |
Yes |
The font family used to render the text. |
Node.Height |
Layout Height |
No |
Yes |
The height of the node when used in a layout. Overrides the default bounds of the item. |
Node.HitTestable |
Hit Testable |
No |
Yes |
When enabled, users can pick the node from the default Camera node of the active Scene node. For example, you must enable hit testing for Button nodes to work. |
Node.HitTestableContainer |
Hit Testable Container |
No |
Yes |
When enabled, Kanzi uses the layout bounds as geometry for hit testing. |
Node.HorizontalAlignment |
Horizontal Alignment |
No |
Yes |
The alignment in horizontal direction the node should use when it resides under a layout. |
Node.HorizontalMargin |
Horizontal Margin |
No |
Yes |
Sets the horizontal space between this node and other nodes that are adjacent to this node in a layout. To set the Horizontal Margin property fields in a binding use: - Vector_X to access the Left property field - Vector_Y to access the Right property field |
Node.Hover |
Hover |
No |
Yes |
Indicates whether a node is the foremost hit testable node under the cursor. |
Node.Locale |
Locale |
No |
No |
The locale of the node. |
Node.Opacity |
Opacity |
No |
Yes |
Opacity of the node. |
Node.Path |
Node.Path |
No |
Yes |
Full path to the node. |
Node.Projection2DTo3DScale |
2D to 3D Projection Scale |
No |
Yes |
Sets the scale factor to project pixels to 3D size. When scale is 1, then the size of one pixel is one 3D space unit. |
Node.StateManager |
State Manager |
No |
Yes |
Sets the State Manager to the node. |
Node.Style |
Style |
No |
Yes |
Sets a style to the node. |
Node.VerticalAlignment |
Vertical Alignment |
No |
Yes |
The alignment in vertical direction the node should use when it resides under a layout. |
Node.VerticalMargin |
Vertical Margin |
No |
Yes |
Sets the vertical space between this node and other nodes that are adjacent to this node in a layout. To set the Vertical Margin property fields in a binding use: - Vector_X to access the Bottom property field - Vector_Y to access the Top property field |
Node.Visible |
Visible |
No |
Yes |
When disabled, Kanzi does not render the node. |
Node.VisibleAmountInParent |
Visible Amount in Parent |
No |
Yes |
Sets the amount the node is inside its parent. Use the value of this property in shaders to implement fades. Calculated by the parent node. |
Node.Width |
Layout Width |
No |
Yes |
The width of the node when used in a layout. Overrides the default bounds of the item. |
Node2D.AspectRatio |
Aspect Ratio |
No |
Yes |
Determines the proportion of width and height. You cannot set both the Aspect Ratio and both, Width and Height. |
Node2D.BackgroundBrush |
Background Brush |
No |
Yes |
The background brush to paint the background of 2D nodes. |
Node2D.CacheValid |
Cache Valid |
No |
Yes |
Indicates whether the node is cached. To disable the cache for one frame, disable this property. |
Node2D.CachingMode |
Caching Mode |
No |
Yes |
Sets the caching mode of this node: - Disabled sets Kanzi to render the node and its descendants normally, without caching. This is the default. - Enabled sets Kanzi to cache the node and its descendants and render the node from the cache image until you invalidate the cache by disabling the Cache Valid property. - Automatic sets Kanzi to automatically update the cache of the node whenever the content of the node or its descendants change. |
Node2D.CompositionBrush |
Composition Brush |
No |
Yes |
The brush to use to compose 2D nodes to screen. |
Node2D.DisableRenderTargetClear |
Disable Render Target Clear Color |
No |
Yes |
Do not clear render target buffers before rendering into it even if necessary. |
Node2D.ForceComposition |
Force Composition |
No |
Yes |
Force rendering to composing target even if not otherwise necessary. |
Node2D.ForegroundBrush |
Foreground Brush |
No |
Yes |
The foreground brush to paint the foreground of 2D nodes. |
Node2D.ForegroundHint |
Foreground Hint |
No |
Yes |
Give a hint of the type of the foreground of 2D nodes: - None renders the background brush after rendering the node. - Translucent renders the background brush before the content of the node. - Occluding renders the background brush. |
Node2D.LayoutTransformation |
Layout Transformation |
No |
Yes |
The 2D transformation to be applied before layouting. |
Node2D.OffscreenRendering |
Off-Screen Rendering |
No |
Yes |
When set and the node has an explicitly set render target, do not render the resulting framebuffer to screen. |
Node2D.PerspectiveTransformation |
Perspective Transformation |
No |
Yes |
The 3D transformation to be applied after layouting. |
Node2D.PerspectiveTransformationFov |
Perspective Transformation FOV |
No |
Yes |
The 3D transformation field of view (degrees) to be applied after layouting. |
Node2D.PerspectiveTransformationMode |
Perspective Transformation Mode |
No |
Yes |
Defines the mode of operation for the coordinate system and field of view. |
Node2D.PerspectiveTransformationOrigin |
Perspective Transformation Origin |
No |
Yes |
The 3D transformation origin to be used for perspective transformation on this or child nodes. |
Node2D.PerspectiveTransformationPivot |
Perspective Transformation Pivot |
No |
Yes |
The 3D pivot point in relative coordinates. |
Node2D.PixelFormat |
Pixel Format |
No |
Yes |
The pixel format of the node if rendering to a texture. |
Node2D.RenderSelf |
Render Self |
No |
Yes |
Whether the node renders itself. Does not affect the rendering of child nodes. |
Node2D.RenderTarget |
Render Target |
No |
Yes |
Forces the node to be rendered into a given render target texture. When set to "No Target", regular conditions whether node is rendered to a texture, such as opacity and rotation, are applied. |
Node2D.RenderTargetMinimumHeight |
Render Target Minimum Height |
No |
Yes |
Sets the minimum height of implicitly generated render targets. |
Node2D.RenderTargetMinimumWidth |
Render Target Minimum Width |
No |
Yes |
Sets the minimum width of implicitly generated render targets. |
Node2D.RenderTargetReallocationLimit |
Render Target Reallocation Limit |
No |
Yes |
The change in size that triggers reallocation of a render target. |
Node2D.RenderTransformation |
Render Transformation |
No |
Yes |
The 2D transformation to be applied after layouting. |
Node2D.RenderTransformationOrigin |
Render Transformation Origin |
No |
Yes |
Sets the render transform origin in relative coordinates. |
Node2D.SnapToPixel |
Snap to Pixel |
No |
Yes |
Snap the translation of the node and its size into pixel boundary. |
Node3D.FinalTransformation |
Final Transformation |
No |
Yes |
The combined location, orientation and scale of the node and its ancestor nodes. Automatically calculated by the system. |
Node3D.LayoutTransformation |
Layout Transformation |
No |
Yes |
The location, orientation and scale of the node relative to its parent node. Layout Transformation affects the layout. If you do not want to affect the layout, use Render Transformation. |
Node3D.RenderTransformation |
Render Transformation |
No |
Yes |
The location, orientation, and scale of the node relative to its parent node. Render transformation does not affect the layout of the node. |
NodeComponent.NodeComponentMessageArguments.TargetName |
Target Node Component Name |
No |
No |
Sets the name of the node component that receives this message. To send this message to every node component in this node, use an empty string. |
NodeComponent.NodeComponentSourceMessageArguments.SourceName |
Source Node Component Name |
No |
No |
Name of the node component that sent the message. |
NodeListRenderPass.Filter |
Filter |
No |
Yes |
Sets the filter that the Node List Render Pass uses to filter or sort a list of incoming nodes. |
NodeListRenderPass.NodeList |
Node List |
No |
Yes |
Input node list range. Set by a binding from nearest parent node list. |
NodeListRenderPass.OutputNodeList |
Output Node List |
No |
Yes |
Output node list range. Set by Node List Render Pass as result of filtering the Input Node List. |
NormalScale |
Normal Scale |
No |
Yes |
Sets the normal scale for the material. Use the scale to set the intensity of the Normal Texture. |
NormalTexture |
Normal Texture |
No |
Yes |
Sets the texture that contains a normal map for the material. Use the Normal Scale property to scale the texture value. |
OcclusionStrength |
Occlusion Strength |
No |
Yes |
Sets the occlusion strength for the material. Use the strength to set the intensity of the Occlusion Texture. |
OcclusionTexture |
Occlusion Texture |
No |
Yes |
Sets the texture that contains an occlusion map for the material. Use the Occlusion Strength property to scale the occlusion from the texture. |
OnPropertyChangedTrigger.IgnoreIdenticalValue |
Ignore Identical Value |
No |
No |
Invoke the trigger only on change in the monitored property's value. |
OnPropertyChangedTrigger.SourceNode |
Node |
No |
No |
The node for which this trigger monitors property changes. |
OnPropertyChangedTrigger.SourcePropertyType |
Property Type |
No |
No |
The property type the changes of which trigger this trigger. |
Page.AutoActivate |
Keep Active |
No |
No |
Always activate this Page node when its parent is active. |
Page.RotationOffset |
Rotation Offset |
No |
Yes |
The angle in degrees by which to rotate a Page node. |
Page.ScaleOffset |
Scale Offset |
No |
Yes |
The factor by which to scale a Page node. |
Page.SlideOffset |
Slide Offset |
No |
Yes |
The offset to slide a Page node in horizontal or vertical direction:nX [-1, 1] to move the Page node horizontallynY [-1, 1] to move the Page node vertically |
Page.State |
Activation State |
No |
Yes |
The state of this Page node: false (inactive and invisible) or true (active and visible) (read-only). |
Page.TransitionPhase |
Transition Phase |
No |
Yes |
The phase of the transition. For example, use for pixel-based effects. |
PageHost.DefaultSubPage |
Default Subpage |
No |
No |
The default or the currently active subpage, which Kanzi automatically activates whenever this PageHost node becomes active. |
PageHost.LoopSubPages |
Loop Subpages |
No |
No |
Loop the subpages when navigating to the next or previous subpage. |
PageHost.Transitions |
Transitions |
No |
Yes |
Transitions to be used within this PageHost node. |
PageTransition.Direction |
Direction |
No |
No |
Defines whether the transition is unidirectional (one way) or bidirectional (two way). |
PageTransition.Duration |
Duration |
No |
No |
The duration of a Page node transition (in milliseconds). |
PageTransition.From |
From |
No |
No |
The selection criteria for the source Page node. Use * for any Page node. |
PageTransition.To |
To |
No |
No |
The selection criteria for the target Page node. Use * for any Page node. |
PageTransitionAnimation.AnimationTarget |
Animation Target |
No |
No |
Defines the animation target, either page transitioning in or page transitioning out. |
PageTransitionAnimation.EndValue |
End Value |
No |
No |
The ending value for the animation. |
PageTransitionAnimation.PropertyType |
Transition Property |
No |
No |
Defines which property to animate. |
PageTransitionAnimation.StartValue |
Start Value |
No |
No |
The starting value for the animation. |
PanManipulator.PanDelta |
Pan Delta |
No |
No |
Holds the change in pan position since the last update in global screen coordinates. |
PanManipulator.PanVelocity |
Pan Velocity |
No |
No |
Holds the current estimate of the pan velocity in global screen coordinates. |
PanManipulatorComponent.MaximumTouchPoints |
Maximum Touch Points |
No |
Yes |
Sets the maximum number of touches allowed on the node area for the installed pan manipulator to recognize the pan gesture and to set off the Pan Started trigger. The default value is 10. The value cannot be lower than the value of the Minimum Touch Points property. |
PanManipulatorComponent.MinimumTouchPoints |
Minimum Touch Points |
No |
Yes |
Sets the minimum number of touches required on the node area for the installed pan manipulator to recognize the pan gesture and to set off the Pan Started trigger. The default value is 1. |
PanManipulatorComponent.RecognitionThreshold |
Recognition Threshold |
No |
Yes |
Sets the threshold in pixels on the horizontal and vertical axis that the finger must move before Kanzi recognizes it as a pan gesture. The default value is 5 pixels on both axes. To disable the pan gesture along either axis, set the threshold on that axis to -1. |
PanManipulatorComponent.RoutingMode |
Routing Mode |
No |
No |
Routing mode determines when the input manipulator recognizes input events: - Bubbling: The installed manipulator recognizes input events that are traversing from the hit test node or the focus node to the root node. - Tunneling: The installed manipulator recognizes input events that are traversing from the root node to the hit test node or to the focus node. |
ParallelActivityHostConcept.BringActivatedToFront |
Bring Activated To Front |
No |
Yes |
|
PinchManipulator.PinchPositionDelta |
Pinch Position Delta |
No |
No |
|
PinchManipulator.PinchRotation |
Pinch Rotation |
No |
No |
|
PinchManipulator.PinchScale |
Pinch Scale |
No |
No |
|
PipelineStateRenderPass.BlendMode |
Blend Mode |
No |
Yes |
Overrides the blend mode set in each node that this render pass renders. |
PipelineStateRenderPass.ColorWriteMode |
Color Write Mode |
No |
Yes |
Sets which channels the render pass writes to the color buffer. To disable the color write, set the property to None. |
PipelineStateRenderPass.CullMode |
Cull Mode |
No |
Yes |
Sets the culling of the triangle faces in the rendered meshes. Set to: - Back to render the triangles whose normal points towards a Camera node - Front to render the triangles whose normal points away from a Camera node |
PipelineStateRenderPass.DepthTestFunction |
Depth Test Function |
No |
Yes |
Controls whether the depth test discards a fragment. |
PipelineStateRenderPass.DepthWriteEnabled |
Depth Write Enabled |
No |
Yes |
Sets whether the render pass writes to the depth buffer. |
PipelineStateRenderPass.Scissor |
Scissor Area |
No |
Yes |
Sets the scissor test within the current rendering Viewport node. You can define the scissor in either relative or absolute coordinates, the default is relative. Use the Scissor Mode property to set the coordinate type. |
PipelineStateRenderPass.ScissorMode |
Scissor Mode |
No |
Yes |
Sets the scissor test coordinate mode. |
PipelineStateRenderPass.StencilFailOperation |
Stencil Fail Operation |
No |
Yes |
Sets the operation that the render pass performs when the stencil test fails. |
PipelineStateRenderPass.StencilMask |
Stencil Function Mask |
No |
Yes |
Sets a mask on which the AND operation is executed with both the reference value and the stored stencil value when the test is done. |
PipelineStateRenderPass.StencilPassDepthFailOperation |
Stencil Pass Depth Fail Operation |
No |
Yes |
Sets the operation that the render pass performs when the stencil test passes, but the depth test fails. |
PipelineStateRenderPass.StencilPassDepthPassOperation |
Stencil Pass Depth Pass Operation |
No |
Yes |
Sets the operation that the render pass performs when both, the stencil and the depth test, pass. |
PipelineStateRenderPass.StencilReferenceValue |
Stencil Function Reference Value |
No |
Yes |
Sets the reference value for the stencil test. |
PipelineStateRenderPass.StencilTestFunction |
Stencil Test Function |
No |
Yes |
Controls whether the stencil test discards a fragment. |
PipelineStateRenderPass.StencilWriteEnabled |
Stencil Write Enabled |
No |
Yes |
Sets whether to enable writing to the stencil buffer. |
PipelineStateRenderPass.Viewport |
Viewport Area |
No |
Yes |
Modifies the current rendering Viewport node. You can define the Viewport in either relative or absolute coordinates, the default is relative. Use the Viewport Mode property to set the coordinate type. |
PipelineStateRenderPass.ViewportMode |
Viewport Mode |
No |
Yes |
Sets the coordinate type for the Viewport node. |
PointLight |
Point Light |
No |
Yes |
Point light settings |
PointLightAttenuation |
Point Light Attenuation |
No |
Yes |
Sets the effect that this Point Light has on nodes that are farther away. Distance of light from the lighted surface is input in a quadratic function, the 3 components are the constant, linear and quadratic coefficients for the distance variable. |
PointLightColor |
Point Light Color |
No |
Yes |
Sets the color of the Point Light. |
PointLightRadius |
Point Light Radius |
No |
Yes |
Sets the distance at which the intensity of the Point Light reaches zero. For infinite distance, set the property value to 0. |
PrefabViewConcept.AsynchronousLoadCompletedMessageArguments.PrefabTemplate |
Prefab Template |
No |
No |
The prefab whose resources finished loading asynchronously. |
PrefabViewConcept.LoadAsynchronouslyMessageArguments.PrefabTemplate |
Prefab Template |
No |
No |
The prefab whose resources you want to load asynchronously. |
PrefabViewConcept.Prefab |
Prefab Template |
No |
Yes |
Node to use on this prefab view. |
ProgressiveRenderingViewport2D.Animation |
Timeline |
No |
Yes |
The animation timeline to play in Progressive Rendering Viewport 2D |
ProgressiveRenderingViewport2D.MultisampleLevel |
Multisample Level |
No |
Yes |
Sets the multisampling level of the progressive rendering backbuffers. To disable multisampling, remove the property or set the property value to 1. |
ProjectResourceDefaultCrossProjectVisibility |
Resource Visibility Across Projects |
No |
Yes |
Sets whether the resources of this project are available to referencing projects: - Private makes the resources available only to this project. This is the default value. - Public makes the resources available in the dropdown menus of referencing projects. To override this setting for an individual resource, add and set the Visibility Across Projects property for that resource. |
PropertyDrivenAnimationPlayer.Enabled |
Enabled |
No |
No |
Specifies whether animation timeline is applied. |
PropertyDrivenAnimationPlayer.RelativePlayback |
Relative Playback |
No |
No |
Specifies whether animations are applied in relative manner by adding animated value to target property value instead of replacing the property value. |
PropertyDrivenAnimationPlayer.Timeline |
Target Animation Timeline |
No |
No |
The target animation timeline for property driven animation. |
PropertyDrivenAnimationPlayer.TimePropertyTypeProperty |
Time Controller Property Type |
No |
No |
The type of property on the node whose value is taken by the player as input time for timeline playback. |
PropertyTargetEasingInterpolator.EasingFunction |
Easing Function |
No |
No |
Sets the easing function that defines the curve of the interpolation. |
PropertyTargetEasingInterpolator.EasingMode |
Easing Mode |
No |
No |
Sets how to apply the easing function to the interpolation. |
PropertyTargetEasingInterpolator.Enabled |
Enabled |
No |
Yes |
Sets whether the Property Target Easing Interpolator interpolates the value of the Interpolated Property Type. |
PropertyTargetEasingInterpolator.InterpolatedPropertyField |
Interpolated Field |
No |
No |
The property field of the Interpolated Property Type you want to interpolate from its previous value to a new value using this Property Target Easing Interpolator. |
PropertyTargetEasingInterpolator.InterpolatedPropertyType |
Interpolated Property Type |
No |
No |
The property type you want to interpolate from its previous value to a new value using this Property Target Easing Interpolator. |
PropertyTargetEasingInterpolator.InterpolationDuration |
Interpolation Duration |
No |
No |
Sets the duration of the interpolation in milliseconds. |
PropertyTargetEasingInterpolator.InterpolationIfInterrupted |
Interpolation If Interrupted |
No |
No |
|
PropertyTargetEasingInterpolator.NotifyInterpolationCompleted |
Notify Interpolation Completed |
No |
Yes |
Sets whether the Property Target Easing Interpolator dispatches a Completed message every time it completes interpolation. |
PropertyTargetInterpolator.Acceleration |
Acceleration |
No |
No |
Acceleration coefficient of property interpolation. Larger acceleration leads to faster reaching new property value. |
PropertyTargetInterpolator.Drag |
Drag |
No |
No |
Drag coefficient of property interpolation. Larger drag lowers maximum speed of interpolation. |
PropertyTargetInterpolator.InterpolatedPropertyField |
Interpolated Field |
No |
No |
The field of a property on a node which is interpolated from its previous value to new one by property target interpolator. |
PropertyTargetInterpolator.InterpolatedPropertyType |
Interpolated Property Type |
No |
No |
The property type of a property on a node which is interpolated from its previous value to new one by property target interpolator. |
RangeConcept.CommonMessageArguments.Value |
Range Value |
No |
No |
Range Value |
RangeConcept.IsValueChanging |
Is Value Changing |
No |
Yes |
Whether the value is currently changing. |
RangeConcept.MaximumValue |
Maximum Value |
No |
Yes |
The maximum value that the range allows. |
RangeConcept.MinimumValue |
Minimum Value |
No |
Yes |
The minimum value that the range allows. |
RangeConcept.NormalizedValue |
Normalized Value |
No |
Yes |
The current value normalized to range [0, 1]. |
RangeConcept.Step |
Step Value |
No |
Yes |
The minimum amount that the value of the range can change at a time. |
RangeConcept.Value |
Value |
No |
Yes |
The current value. |
RenderPass.Enabled |
Enabled |
No |
Yes |
Use Enabled property to toggle render passes and their child render pass tree on and off. Disabled render passes still exist in the tree, but are not executed. |
RenderPassView.RenderPassPrefab |
Render Pass Prefab |
No |
Yes |
Sets the Render Pass Prefab that this Render Pass View instantiates. |
ResourceCrossProjectVisibility |
Visibility Across Projects |
No |
Yes |
Sets whether this resource is available to referencing projects: - Project setting uses the value of the Resource Visibility Across Projects property of the project. - Private makes the resource available only to this project. - Public makes the resource available in the dropdown menus of referencing projects. |
ResourceDictionarySelector.SelectedDictionary |
Selected Theme |
No |
No |
The currently selected theme in the theme group. In Kanzi Studio you can change the current theme with the ActivateTheme action. |
ResourceKeepAliveBehavior |
Keep Alive Behavior |
No |
Yes |
The keep-alive behavior of this resource. Can be used to deny unloading of the resource. |
RoughnessFactor |
Roughness Factor |
No |
Yes |
Sets the roughness of the material: 0 represents a smooth, glossy surface, and 1 represents a rough, diffuse surface. |
RoughnessTexture |
Roughness Texture |
No |
Yes |
Sets the texture that contains a roughness map for the material. Kanzi reads the roughness from the Green channel of the texture. Use the Roughness Factor property to scale the roughness from this texture. |
Scene.Camera |
Camera |
No |
Yes |
The camera for displaying the scene. |
Scene.HitTestCamera |
Hit Testing Camera |
No |
Yes |
The camera used in hit testing the objects in the scene. When not set, the default camera is used. |
Screen.ClearColor |
Screen Clear Color |
No |
Yes |
If screen has a clear color, screen will be cleared with the specified color before all other rendering. Depth will be cleared to 1.0f and stencil will be cleared to 0. |
Screen.HostName |
Host Name |
No |
Yes |
Containes the name of the host the node originates from. |
ScrollViewConcept.AllowedScrollAxis |
Allowed Scroll Axis |
No |
Yes |
Sets the axis on which you want to allow this Scroll View node to scroll. |
ScrollViewConcept.DraggingAccelerationCoefficient |
Dragging Acceleration |
No |
Yes |
Sets the acceleration of the node controlled by a Scroll View node while you drag that Scroll View node. Use low values when you want that node to slowly reach the final position. Use high values when you want that node to quickly reach the final position. |
ScrollViewConcept.DraggingDragCoefficient |
Dragging Drag |
No |
Yes |
Sets the amount that drag affects the movement of the node controlled by a Scroll View node while you drag that Scroll View node. The lower the value the higher the drag and the faster the sliding of that node stops. |
ScrollViewConcept.DraggingImpulseFactor |
Dragging Impulse |
No |
Yes |
Sets the amount of impulse generated from the pointing device movement when dragging a Scroll View node. |
ScrollViewConcept.LoopingXEnabled |
Looping X Enabled |
No |
Yes |
Sets the node controlled by a Scroll View node to start scrolling from the beginning when the scroll reaches the scroll bounds on the x axis. When the scroll value reaches the maximum value of the bound, the value changes to the minimum value and the other way around. Use the Scroll Bounds Minimum and Scroll Bounds Maximum properties to set the scroll bounds. |
ScrollViewConcept.LoopingYEnabled |
Looping Y Enabled |
No |
Yes |
Sets the node controlled by a Scroll View node to start scrolling from the beginning when the scroll reaches the scroll bounds on the y axis. When the scroll value reaches the maximum value of the bound, the value changes to the minimum value and the other way around. Use the Scroll Bounds Minimum and Scroll Bounds Maximum properties to set the scroll bounds. |
ScrollViewConcept.MaximumNumberOfTouches |
Maximum Number of Touches |
No |
Yes |
Sets the maximum number of touch points allowed for a Scroll View pan. |
ScrollViewConcept.MinimumNumberOfTouches |
Minimum Number of Touches |
No |
Yes |
Sets the required number of touch points pressed for a Scroll View node pan to start. Scroll View nodes with minimum number of touches greater than one precede the children in touch processing. |
ScrollViewConcept.RecognitionThreshold |
Recognition Threshold |
No |
Yes |
Sets the amount a pointing device must move for the scrolling to start on a Scroll View node. |
ScrollViewConcept.ScrollBoundsMaximum |
Scroll Bounds Maximum |
No |
Yes |
Sets the coordinates of the bottom-right corner of the scroll bounds rectangle. Scroll bounds define where the scrolling begins and ends. |
ScrollViewConcept.ScrollBoundsMinimum |
Scroll Bounds Minimum |
No |
Yes |
Sets the coordinates of the top-left corner of the scroll bounds rectangle. Scroll bounds define where the scrolling begins and ends. |
ScrollViewConcept.Scrolling |
Scrolling |
No |
Yes |
Whether a Scroll View node is currently scrolling (read-only). |
ScrollViewConcept.ScrollPosition |
Scroll Position |
No |
Yes |
Sets the scroll position of the Scroll View along the x and y axes as a relative position within the scroll view area. Use this property to set the scroll position immediately, without scrolling. To update the scroll position with a binding, use a two-way or to-source binding. |
ScrollViewConcept.ScrollSpeed |
Scroll Speed |
No |
Yes |
The current scroll speed (read-only). |
ScrollViewConcept.ScrollTargetPosition |
Scroll Target Position |
No |
Yes |
The current target scroll value (read-only). |
ScrollViewConcept.Sensitivity |
Scroll Sensitivity |
No |
Yes |
Sets the amount the position changes relative to the movement of the pointer that starts the swiping. The higher the value the more the position of the node controlled by a Scroll View node changes. The default value is 1. |
ScrollViewConcept.SlidingAccelerationCoefficient |
Sliding Acceleration |
No |
Yes |
Sets the acceleration of the node controlled by a Scroll View node after you release the pointer with which you swipe. Use low values when you want that node to slowly reach the final position. Use high values when you want that node to quickly reach the final position. |
ScrollViewConcept.SlidingDragCoefficient |
Sliding Drag |
No |
Yes |
Sets the amount that drag affects the movement of the node controlled by a Scroll View node after you release the pointer with which you swipe. The lower the value the higher the drag and the faster the sliding of the object controlled by the Scroll View node stops. |
ScrollViewConcept.StepMultiplier |
Step Multiplier |
No |
Yes |
Sets the smallest distance that a Scroll View scrolls. |
ScrollViewConcept.SwipeDistance |
Swipe Distance |
No |
Yes |
Sets the distance that a swipe sends the scroll value, relative to the pointing device speed. |
ScrollViewConcept.Zoom |
Zoom |
No |
Yes |
Sets the current zoom level. |
ScrollViewConcept.ZoomAffectsScrolling |
Zoom Affects Scrolling |
No |
Yes |
Controls whether the scroll position is scaled, according to the zoom level. |
ScrollViewConcept.ZoomEnabled |
Zoom Enabled |
No |
Yes |
Sets whether to install a pinch manipulator that generates zoom messages. |
ScrollViewConcept.ZoomMaximum |
Maximum Zoom |
No |
Yes |
Sets the maximum zoom level. |
ScrollViewConcept.ZoomMinimum |
Minimum Zoom |
No |
Yes |
Sets the minimum zoom level. |
SliderConcept.MaxDistanceFromCurve |
Maximum Distance From Curve |
No |
Yes |
The distance from the curve where hit testing succeeds. |
SpecularAntiAliasingStrength |
Specular Anti-Aliasing Strength |
No |
Yes |
Sets the strength of the specular anti-aliasing effect. Higher value results in blurrier specular highlights. For no specular anti-aliasing, set the value to 0. For full specular anti-aliasing, set the value to 1. The default value is 0.25. |
SpecularAntiAliasingThreshold |
Specular Anti-Aliasing Threshold |
No |
Yes |
Sets the upper limit for the amount of specular anti-aliasing effect to apply. The default value is 0.18. |
SpecularColor |
Specular Color |
No |
Yes |
The color of the specular reflection. |
SpecularExponent |
Specular Exponent |
No |
Yes |
Determines the size of the specular highlight. |
SpecularFactor |
Specular Color Factor |
No |
Yes |
Sets the specular color for the material. |
SpecularTexture |
Specular Color Texture |
No |
Yes |
Sets the texture that contains the specular color for the material. Use the Specular Color Factor property to filter the value from this texture. |
SpotLight |
Spot Light |
No |
Yes |
Spot light settings |
SpotLightAttenuation |
Spot Light Attenuation |
No |
Yes |
Sets the effect that this Spot Light has on nodes that are farther away. Distance of light from the lighted surface is input in a quadratic function, the 3 components are the constant, linear and quadratic coefficients for the distance variable. |
SpotLightColor |
Spot Light Color |
No |
Yes |
Sets the color of the Spot Light. |
SpotLightCutoffAngle |
Cutoff |
No |
Yes |
Sets the angle of the light cone in degrees. |
SpotLightExponent |
Exponent |
No |
Yes |
Defines how fast a fully lit area at the center of the light cone turns into an unlit area. |
SpotLightInnerAngle |
Inner Angle |
No |
Yes |
Sets the inner angle of the light cone in degrees. |
SpotLightRadius |
Spot Light Radius |
No |
Yes |
Sets the distance at which the intensity of the Spot Light reaches zero. For infinite distance, set the property value to 0. |
StackLayoutConcept.Direction |
Direction |
No |
Yes |
Defines the axis along which the stack layout arranges its items. |
StackLayoutConcept.Reversed |
Reversed |
No |
Yes |
Defines whether the stack layout arranges its items in reverse order. |
StateGroupInitialState |
Initial State |
No |
Yes |
Allows to define a startup state for a group, if there is no controller property defined. |
Tags |
Tags |
No |
Yes |
List of tags attached to the item |
TextBlock3D.Baseline |
Baseline |
No |
Yes |
Font baseline in 3D space units. |
TextBlock3D.TwoPassRendering |
Two Pass Rendering |
No |
Yes |
Defines whether the Text Block 3D is rendered in two passes. Disabling the two pass rendering improves performance, but can cause invalid rendering results when glyph bounds overlap. |
TextBlockConcept.WordWrap |
Word Wrap |
No |
Yes |
Sets whether to break long lines into multiple lines to make the text fit within the boundaries of the Text Block node. |
TextBox3D.CompositionBackgroundColor |
Composition Background Color |
No |
Yes |
Sets the color that highlights the text that the user composes using an input method editor (IME). |
TextBox3D.CompositionFontColor |
Composition Font Color |
No |
Yes |
Sets the color of the text that the user composes using an input method editor (IME). |
TextBox3D.SelectionBackgroundColor |
Selection Background Color |
No |
Yes |
Sets the color that highlights the selected text. |
TextBox3D.SelectionFontColor |
Selection Font Color |
No |
Yes |
Sets the color of the selected text. |
TextBoxConcept.CompositionText |
Composition Text |
No |
Yes |
Reports the text that the user composes in the Text Box using an input method editor (IME). |
TextBoxConcept.CompositionTextBackgroundBrush |
Composition Text Background Brush |
No |
Yes |
Sets the brush that highlights the text that the user composes using an input method editor (IME). |
TextBoxConcept.CompositionTextForegroundBrush |
Composition Text Foreground Brush |
No |
Yes |
Sets the brush for the text that the user composes using an input method editor (IME). |
TextBoxConcept.CursorPosition |
Cursor Position |
No |
Yes |
Sets the position of the cursor in the text shown in the Text Box node. |
TextBoxConcept.CursorPositionMessageArguments.CursorPosition |
Current Position |
No |
No |
Contains the current position of the cursor. |
TextBoxConcept.CursorPrefab |
Cursor Prefab |
No |
Yes |
Sets the prefab template that defines the appearance of the cursor instead of the default cursor. |
TextBoxConcept.DisplayText |
Display Text |
No |
Yes |
Reports the text that the Text Box displays. |
TextBoxConcept.EchoMode |
Echo Mode |
No |
Yes |
Sets how the Text Box node shows text: - Normal makes the inserted characters visible. - No Echo makes the inserted characters invisible. - Password makes the inserted character visible for a certain amount of time and then masks the character. Use the Password Masking Character property to set the masking character. The default is a bullet symbol. Use the Password Echo Timeout property to set the time in milliseconds that an inserted character is visible before masking. |
TextBoxConcept.EditMode |
Edit Mode |
No |
Yes |
Sets how the Text Box node enters the editing state: - Automatic makes the Text Box enter the editing state when focused, and leave the editing state when focus is lost. - Triggered requires the user to trigger the Text Box to enter and leave the editing state. |
TextBoxConcept.EnterKeyLabel |
Enter Key Label |
No |
Yes |
Sets the Enter key label of the on-screen keyboard. |
TextBoxConcept.HasSelection |
Has Selection |
No |
Yes |
Indicates whether any of the text in the Text Box node is selected. |
TextBoxConcept.HideTextHintWhenEditing |
Hide Text Hint When Editing |
No |
Yes |
Sets whether to hide the placeholder content, which you set using the Text Hint Prefab property, when the Text Box node is in the editing state. To hide the placeholder content only when the user enters text in the Text Box node, disable this property. |
TextBoxConcept.InputType |
Input Type |
No |
Yes |
Sets the input type of the input methods that provide the input layout to let the user enter and edit text of specific type in the Text Box node: - Default for the default input type of the input method editor. - Numeric for numbers - Email for email addresses - URL for URL addresses |
TextBoxConcept.IsComposingText |
Is Composing Text |
No |
Yes |
Reports the text composition state of the Text Box node. |
TextBoxConcept.IsEditing |
Is Editing |
No |
Yes |
Reports the editing state of the Text Box node. |
TextBoxConcept.MaximumTextLength |
Maximum Text Length |
No |
Yes |
Sets the maximum length of text that the user can insert in the Text Box node. The unit is a UTF-8 character and the buffer byte length can be greater for multi-byte characters. |
TextBoxConcept.PasswordEchoTimeout |
Password Echo Timeout |
No |
Yes |
Sets the time in milliseconds that an inserted character is visible before being masked when using the password echo mode. To use the password echo mode, set the Echo Mode property to Password Echo. |
TextBoxConcept.PasswordMaskingCharacter |
Password Masking Character |
No |
Yes |
Sets the character that masks each character that the application user enters when using the password echo mode. To use the password echo mode, set the Echo Mode property to Password. |
TextBoxConcept.ReadOnly |
Read Only |
No |
Yes |
Sets whether the Text Box node is editable. When you enable this property, you can set the text only through the Text property and the user cannot edit the text in the Text Box node. |
TextBoxConcept.SelectedTextMessageArguments.SelectionEnd |
Selection End |
No |
No |
Contains the end index of the selection. |
TextBoxConcept.SelectedTextMessageArguments.SelectionStart |
Selection Start |
No |
No |
Contains the index of the character in the beginning of the text selection. |
TextBoxConcept.SelectionBackgroundBrush |
Selection Background Brush |
No |
Yes |
Sets the brush that highlights the selected text. |
TextBoxConcept.SelectionEndCursorPosition |
Selection End Cursor Position |
No |
Yes |
The position of the cursor that marks the end of text selection in the Text Box node. |
TextBoxConcept.SelectionEndPrefab |
Selection End Prefab |
No |
Yes |
Sets the prefab template that defines the appearance of the selection handle at the end of text selection instead of the default handle. |
TextBoxConcept.SelectionForegroundBrush |
Selection Foreground Brush |
No |
Yes |
Sets the brush for the selected text. |
TextBoxConcept.SelectionStartCursorPosition |
Selection Start Cursor Position |
No |
Yes |
The position of the cursor that marks the beginning of text selection in the Text Box node. |
TextBoxConcept.SelectionStartPrefab |
Selection Start Prefab |
No |
Yes |
Sets the prefab template that defines the appearance of the selection handle at the beginning of text selection instead of the default handle. |
TextBoxConcept.TextContentMessageArguments.TextFieldContent |
Text |
No |
No |
Contains the content of a Text Box node. |
TextBoxConcept.TextHintPrefab |
Text Hint Prefab |
No |
Yes |
Sets the prefab template for showing placeholder content when the Text Box node is empty. |
TextBoxConcept.TextInsertionMessageArguments.Position |
Position |
No |
No |
The character index at which to insert text. |
TextBoxConcept.TextInsertionMessageArguments.Text |
Text |
No |
No |
Sets the text to insert in the Text Box node. |
TextBoxConcept.TextKeyNavigationDirection |
Text Key Navigation Direction |
No |
Yes |
Sets the text key navigation direction. |
TextBoxConcept.TextRangeMessageArguments.EndPosition |
End Position |
No |
No |
Sets the index of the last character in the text range. |
TextBoxConcept.TextRangeMessageArguments.StartPosition |
Start Position |
No |
No |
Sets the index of the first character in the text range. |
TextConcept.FontColor |
Font Color |
No |
Yes |
Sets the color of the text. |
TextConcept.FontMaterial |
Font Material |
No |
Yes |
Sets the material whose shader is used to render the text. The shader must use the ContentTexture uniform which is automatically filled with glyph data. |
TextConcept.HorizontalPadding |
Horizontal Padding |
No |
Yes |
Sets the padding spaces between the content and the left and right boundaries of the Text node. |
TextConcept.Overflow |
Overflow |
No |
Yes |
Sets the characters that represent the truncated text when the text string to be rendered is too long to fit in the node. The default value is "...". |
TextConcept.RemoveSideBearings |
Remove Side Bearings |
No |
Yes |
Whether to position the leftmost characters of left-aligned text and rightmost characters of right-aligned text exactly within the boundary of the text node. |
TextConcept.Text |
Text |
No |
Yes |
Sets the text content that the text node renders. To create a line break press Shift+Enter. |
TextConcept.TextHorizontalAlignment |
Text Horizontal Alignment |
No |
Yes |
Sets the horizontal alignment of the text. |
TextConcept.TextVerticalAlignment |
Text Vertical Alignment |
No |
Yes |
Sets the vertical alignment of the text. |
TextConcept.VerticalPadding |
Vertical Padding |
No |
Yes |
Sets the padding spaces between the content and the top and bottom boundaries of the Text node. |
Texture |
Texture |
No |
Yes |
The texture of the material. |
TextureBrush.RenderTexture |
Brush Texture |
No |
Yes |
Texture for brush. |
TextureNativeDeploymentTarget |
Native Deployment Target |
No |
Yes |
Sets the memory in which to store this texture on your target device. |
TextureOffset |
Texture Offset |
No |
Yes |
Sets an offset for texture in materials. |
TextureTiling |
Texture Tiling |
No |
Yes |
Determines the number of times a texture is presented in a material. |
TimerTrigger.Interval |
Timer Interval (ms) |
No |
No |
The interval in milliseconds on which the trigger is triggered. |
ToggleButtonGroupConcept.CurrentButtonIndex |
Current Button Index |
No |
Yes |
The index of the currently toggled button. |
ToneMapLinearScale |
Tone Map Linear Scale |
No |
Yes |
Sets the scale for the linear tonemap option for the material. When linear tonemapping is used, Kanzi divides all output color by the value of this property. |
TrajectoryLayoutConcept.AlignToTangent |
Align To Tangent |
No |
Yes |
When set, aligns arranged items to match the tanged of the trajectory. Vertical trajectories are not supported. |
TrajectoryLayoutConcept.CalculatedOffset |
Calculated Offset |
No |
Yes |
Current offset of item caluclated by the trajectory layout in proportional range [0, 1] (read-only). |
TrajectoryLayoutConcept.ItemAreaBegin |
Item Area Begin |
No |
Yes |
Defines the starting point of the trajectory segment in which the layout items are considered fully visible. The value is in [0, 1] range where 0 is the beginning and 1 is the end of the trajectory. Used for property VisibleAmountInParent. |
TrajectoryLayoutConcept.ItemAreaEnd |
Item Area End |
No |
Yes |
Defines the ending point of the trajectory segment in which the layout items are considered fully visible. The value is in [0, 1] range where 0 is the beginning and 1 is the end of the trajectory. Used for property VisibleAmountInParent. |
TrajectoryLayoutConcept.OverrideDistance |
Override Distance |
No |
Yes |
When set the value overrides the distance between items, which otherwise the trajectory layout calculates automatically. |
TrajectoryLayoutConcept.OverrideOffset |
Trajectory Override Offset |
No |
Yes |
Current offset of item manually set, which is otherwise calculated by the trajectory layout. |
TrajectoryLayoutConcept.StartOffset |
Start Offset |
No |
Yes |
Defines the starting offset on the trajectory from where the items are laid out. The value is in [0, 1] range, where 0 is the beginning and 1 is the end of the trajectory spline. |
TrajectoryLayoutConcept.Stretch |
Stretch |
No |
Yes |
Scale the trajectory to match layout size. |
TrajectoryLayoutConcept.Trajectory |
Trajectory |
No |
Yes |
The trajectory to use in a trajectory layout. |
TrajectoryListBox.AllowedScrollAxis |
Allowed Scroll Axis |
No |
Yes |
Sets the axis on which you want to allow this List Box node to scroll. |
TrajectoryListBox.Looping |
Looping |
No |
Yes |
Is list box looping |
TrajectoryListBoxConcept.AlignToTangent |
Align To Tangent |
No |
Yes |
If set, aligns laid out items to match the trajectory's tangent. Vertical trajectories are not supported. |
TrajectoryListBoxConcept.CursorOffset |
Cursor Offset |
No |
Yes |
Offset of the position that is used for selecting the active object, in proportional range [0,1]. |
TrajectoryListBoxConcept.ItemAreaBegin |
Item Area Begin |
No |
Yes |
Offset of starting point of the area in which the child object is fully visible. Used for property VisibleAmountInParent. |
TrajectoryListBoxConcept.ItemAreaEnd |
Item Area End |
No |
Yes |
Offset of ending point of the area in which the child object is fully visible. Used for property VisibleAmountInParent. |
TrajectoryListBoxConcept.ScrollPosition |
Scroll Position |
No |
Yes |
Sets the scroll position of the Trajectory List Box 3D along the x and y axes as a relative position within the list box area. Use this property to move the list to a scroll position immediately, without scrolling. To update the scroll position with a binding, use a two-way or to-source binding. |
TrajectoryListBoxConcept.Spacing |
Spacing |
No |
Yes |
Distance between items in a trajectory list box. |
TrajectoryListBoxConcept.Trajectory |
Trajectory |
No |
Yes |
The trajectory to use. |
TrajectoryListBoxDraggingAccelerationCoefficient |
Dragging Acceleration |
No |
Yes |
How fast scrolling accelerates when dragging in trajectory list box. |
TrajectoryListBoxDraggingDragCoefficient |
Dragging Drag |
No |
Yes |
How much drag affects scrolling when dragging in trajectory list box. |
TrajectoryListBoxDraggingImpulseFactor |
Dragging Impulse |
No |
Yes |
How much impulse is generated from pointing device movement when dragging in trajectory list box. |
TrajectoryListBoxMaximumNumberOfTouches |
Maximum Number of Touches |
No |
Yes |
Maximum number of touch points allowed for the scroll view pan in trajectory list box. |
TrajectoryListBoxMinimumNumberOfTouches |
Minimum Number of Touches |
No |
Yes |
Required number of touch points pressed for the scroll view pan to start in trajectory list box. Scroll view with minimum number of touches greater than one will preceed the inner scroll views in touch processing. |
TrajectoryListBoxRecognitionThreshold |
Recognition Threshold |
No |
Yes |
How much the pointing device has to move for scrolling to start in trajectory list box. |
TrajectoryListBoxSensitivity |
Scroll Sensitivity |
No |
Yes |
How much the scroll value changes relative to pointing device movement on the scroll view plane in trajectory list box. |
TrajectoryListBoxSlidingAccelerationCoefficient |
Sliding Acceleration |
No |
Yes |
How fast scrolling accelerates when sliding in trajectory list box. |
TrajectoryListBoxSlidingDragCoefficient |
Sliding Drag |
No |
Yes |
How much drag affects scrolling when sliding in trajectory list box. |
TrajectoryListBoxSwipeDistance |
Swipe Distance |
No |
Yes |
How far a swipe sends the scroll value in trajectory list box, relative to pointing device speed. |
TriggerActionItem.ForwardedMessageArguments |
Forwarded Arguments |
No |
Yes |
The arguments of the message to forward |
TrySetFocusAction.TargetItem |
Target Item |
No |
No |
Target item to be focused |
ValueControlledExclusiveActivityHostConcept.ControllerProperty |
Controller Property |
No |
Yes |
Sets the property type that the Exclusive Activity Host node uses to switch between its child Activity nodes. |
ValueControlledExclusiveActivityHostConcept.DataSourceControllerPropertyPath |
Data Source Controller Property Path |
No |
Yes |
Sets the path in the Data Source object of an Exclusive Activity Host node to a Data Object item that the Exclusive Activity Host node uses as the Controller Property. |
Viewport2D.Camera |
Camera |
No |
Yes |
Sets which camera to use in scenes rendered by the selected Viewport 2D. If not set, Kanzi uses the camera in the scene. |
Viewport2D.HitTestCamera |
Hit Test Camera |
No |
Yes |
Sets which hit test camera to use in scenes rendered by the selected Viewport 2D. If not set, Kanzi uses the camera in the scene. |
Viewport2D.RenderPass |
Render Pass |
No |
Yes |
The RenderPass used for rendering the Scene for the Viewport. Instantiated from the RenderPassPrefab. Set internally by Kanzi whenever RenderPassPrefabProperty changes. |
Viewport2D.RenderPassPrefab |
Render Pass Prefab |
No |
Yes |
Sets which render pass prefab will be used to instantiate the render pass tree. |
Window.MetricsType |
Metrics Type |
No |
No |
Defines the type of the coordinate system for the window metrics. |
Window.Orientation |
Orientation |
No |
No |
The orientation of the window. |
WriteLogAction.LogText |
Log Text |
No |
No |
The text to write to the Kanzi Studio Log window when a trigger executes this action. |