Camera

Camera available properties

Name

Description

Inherited

Exported to Kanzi Engine

2D to 3D Projection Scale

Sets the scale factor to project pixels to 3D size. When scale is 1, then the size of one pixel is one 3D space unit.

No

Yes

Active Activity Index

The index of the active Activity in the Data-Driven Exclusive Activity Host. After instantiating all Activity from a Data Source, this property refers to the only currently active Activity in this Data-Driven Exclusive Activity Host. To deactivate all the Activities in this Data-Driven Exclusive Activity Host, set this property to -1.

No

Yes

Activity Source

The data object that provides the data for this Activity node.

No

Yes

Activity Status

Sets the possible states of the Activity when its Activity Host activates or deactivates that Activity.

No

Yes

Activity Template

If set, the Data-Driven Exclusive Activity Host uses this prefab for Activity nodes that it creates.

No

Yes

Actual Layout Depth

The calculated size of the node in depth direction when used in a layout.

No

Yes

Actual Layout Height

The calculated height of the node when used in a layout.

No

Yes

Actual Layout Width

The calculated width of the node when used in a layout.

No

Yes

Alpha Cutoff

Sets the cutoff threshold for alpha cutting. If the alpha value is less than the value of this property, Kanzi discards the fragment. The default value is 0.5.

No

Yes

Ambient Color

The color of the material when lights are not present.

No

Yes

Aspect Ratio

The aspect ratio of the camera.

No

Yes

Asymmetric FOV

The field of view of the camera in degrees. Angles are in order left, right, up, and down. Angles to the right of the center and upwards of the center are positive.

No

Yes

Auto Press Interval

Sets the time in milliseconds after which a button that the user keeps pressed down sends the Button: Click message. While the user holds the button down, the button keeps sending the Button: Click message at the time interval set by this property. To disable the behavior, set to 0.

No

Yes

Base Color Factor

Sets the base color for the material.

No

Yes

Base Color Texture

Sets the texture that contains the base color for the material. Use the Base Color Factor property to filter the value from this texture.

No

Yes

Baseline

Font baseline in 3D space units.

No

Yes

Blend Intensity

Controls the intensity of materials that are blended on top of an existing color. Attached property enables overriding of the blend intensity of the used materials at render pass or object node level.

No

Yes

Blend Mode

Sets how to blend colors.

Color Blending: - Additive adds the source pixels to the destination pixels. - Multiply multiplies the source and destination pixels. - Screen adds the source and destination pixels and subtracts from the result the product of the source and destination. - Alpha: Automatic uses premultiplied or non-premultiplied alpha depending on the value of the “Premultiply Alpha” property in the project or an image. - Alpha: Non-premultiplied is a legacy mode. For non-premultiplied input use the Alpha: Mixed mode. - Alpha: Premultiplied expects premultiplied alpha RGBA in the source pixels and blends the source pixels on top of the destination pixels. This is the default and recommended mode for alpha blending. - Alpha: Mixed expects non-premultiplied alpha RGBA in the source pixels, and blends the source pixels with the destination framebuffer.

Alpha Compositing: - Opaque disables blending and replaces the destination pixels with the source pixels. - Clear sets the destination pixels to transparent black. - Exclusive Or draws the non-overlapping source and destination pixels. - Source Atop discards those source pixels that do not cover destination pixels and draws the rest of the source pixels over destination pixels. - Source In draws those source pixels that cover destination pixels and discards all destination pixels. - Source Out draws the source pixels with alpha reduced by the inverse of the destination alpha, and discards all destination pixels. - Destination Atop discards those destination pixels that are not covered by source pixels, and draws the rest of the destination pixels over source pixels. - Destination In draws only those destination pixels that intersect with the source pixels, and discards all source pixels. - Destination Out draws the destination pixels with alpha reduced by the inverse of the source alpha, and discards all source pixels. - Destination Over draws the destination pixels over the source pixels.

Advanced Color Blending: - Multiply (advanced khr) is similar to the Multiply mode but it screens the alpha. - Overlay multiplies dark pixels and screens light pixels. - Darken compares the destination and source pixels and selects the darker one. - Lighten compares the destination and source pixels and selects the lighter one. - Color Burn darkens the destination to reflect the color of the source. - Color Dodge lightens the destination to reflect the color of the source. - Hard Light multiplies with dark source color and screens with light source color. - Soft Light burns with dark source color and dodges with light source color. - Difference uses the difference of the source and destination pixels. - Exclusion is similar to difference but the result is lower in contrast. - HSL Hue uses the hue of the source, and the luminosity and saturation of the destination. - HSL Saturation uses the saturation of the source, and the hue and luminosity of the destination. - HSL Color uses the hue and saturation of the source, and the luminosity of the destination. - HSL Luminosity uses luminosity of the source, and the jue and saturation of the destination.

The advanced color blending modes require the GL_KHR_blend_equation_advanced and GL_KHR_blend_equation_advanced_coherent OpengGL extensions.

No

Yes

Bottom Image

The image to use in middle of the bottom row.

No

Yes

Bottom-Left Image

Image to use in the bottom-left corner.

No

Yes

Bottom-Right Image

The image to use in the bottom-right corner.

No

Yes

BRDF Lookup Table

Gets the Bidirectional Reflectance Distribution Function (BRDF) lookup table for the material. The BRDF table is a texture that contains precomputed information about how light reflects off a material. You can use it to improve rendering quality.

No

Yes

Bring Activated Activity To Front

Sets whether to show the activated Activity in front within its Parallel Activity Host. This property affects the z-order of the activated Activity within the same Activity priority layer: - When enabled, the Activity is shown in front. - When disabled, the z-order of the activated child Activity is determined by the order in which you added that Activity to the parent Parallel Activity Host. This is the default behavior.

No

Yes

Brush Color

Color for brush. Set alpha to 0 to disable brush.

No

Yes

Brush Horizontal Tiling

Horizontal Tiling for the brush. Affects the scale of texture coordinates.

No

Yes

Brush Modulate Color

Modulation color for brush. Effects brush rendering that needs color modulation.

No

Yes

Brush Texture

Texture for brush.

No

Yes

Brush Vertical Tiling

Vertical Tiling for the brush. Affects the scale of texture coordinates.

No

Yes

Calculated Offset

Reports the current relative offset of an item in the Grid List Box in proportional range [0, 1].

No

Yes

Calculated Offset

Reports the current offset of an item in a Trajectory Layout in the proportional range [0, 1].

No

Yes

Center Image

The image to use in the center.

No

Yes

Character Spacing

Sets the character spacing in pixels.

No

Yes

Clear Coat Normal Scale

Sets the clear coat normal scale for the material. Use the scale to set the intensity of the Clear Coat Normal Texture.

No

Yes

Clear Coat Normal Texture

Sets the texture that contains a clear coat normal map for the material. Use the Clear Coat Normal Scale property to scale the texture value.

No

Yes

Clear Coat Roughness Factor

Sets the roughness of the outer clear coat layer for the material: 0 represents a smooth, glossy surface, and 1 represents a rough, diffuse surface.

No

Yes

Clear Coat Roughness Texture

Sets the texture that contains a clear coat roughness map for the material. Kanzi reads the roughness from the Green channel of the texture. Use the Clear Coat Roughness Factor property to scale the roughness from this texture.

No

Yes

Clear Coat Strength Factor

Sets the clear coat strength for the material: 0 represents a material with no clear coat, and 1 represents a full strength clear coat.

No

Yes

Clear Coat Strength Texture

Sets the texture that contains a clear coat strength map for the material. Kanzi reads the strength from the Red channel of the texture. Use the Clear Coat Strength Factor property to scale the strength from this texture.

No

Yes

Clip Children

Sets whether to clip the child nodes of this node. Kanzi clips the child nodes whose bounding box is completely outside of the bounding box of their parent node. Use this property with layout nodes. The child nodes can use only translation transformation.

No

Yes

Code Behind Source

Sets the metaclass name of the code behind class for this node.

No

Yes

Column

The column into which grid layout places the item.

No

Yes

Column Span

Defines the number of columns an item in a grid layout occupies.

No

Yes

Command

The command executed by a UI control

No

Yes

Constraint In World Coordinates

Specifies if the object constraining is done in world coordinates (when false, done in local coordinates).

No

Yes

Constraint Orientation

Makes an object node where the property is attached to obtain orientation from target object

No

Yes

Constraint Position

Makes an object node where the property is attached to obtain position from target object

No

Yes

Controller Property

Sets the property type that the Exclusive Activity Host node uses to switch between its child Activity nodes.

No

Yes

Custom Asset Thumbnail

When enabled, the asset will have selected image as thumbnail instead of the generated one.

No

No

Cyclic Focus Navigation

Sets whether the focus chain navigation within the focus scope is cyclic. When you enable this property: - When the user navigates in the forward direction and the focus reaches the last focusable UI element of the focus scope, the focus navigation moves to the first focusable UI element. - When the user navigates in the backward direction and the focus reaches the first focusable UI element of the focus scope, the focus navigation moves to the last focusable UI element.

No

Yes

Data Context

Source of data for this node and its descendants

No

Yes

Data Source Controller Property Path

Sets the path in the Data Source object of an Exclusive Activity Host node to a Data Object item that the Exclusive Activity Host node uses as the Controller Property.

No

Yes

Depth Alignment

The alignment in depth direction the node should use when it resides under a layout.

No

Yes

Depth Margin

Sets the depth distance between this node and other nodes that are adjacent to this node in a layout. To set the Depth Margin property fields in a binding use: - Vector_X to access the Back property field - Vector_Y to access the Front property field

No

Yes

Description

Add a description of the purpose of this item. To export descriptions to a plain text file, select File > Export > Export Descriptions. When you export the kzb file, this description is not included in the exported file.

No

No

Detail Base Color Factor

Sets the detail base color for the material. The detail base color is alpha blended with the standard base color.

No

Yes

Detail Base Color Texture

Sets the detail texture that contains the base color for the material. Use the Detail Base Color Factor property to filter the value from this texture. The detail base color is alpha blended with the standard base color. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture.

No

Yes

Detail Clear Coat Normal Scale

Sets the detail clear coat normal scale for the material. Use the scale to set the intensity of the Detail Clear Coat Normal Texture.

No

Yes

Detail Clear Coat Normal Texture

Sets the detail texture that contains a clear coat normal map for the material. Use the Detail Clear Coat Normal Scale property to scale the texture value.

No

Yes

Detail Clear Coat Roughness Texture

Sets the detail texture that contains a clear coat roughness map for the material. Use the Clear Coat Roughness Factor and Clear Coat Roughness Texture properties to scale the roughness from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture.

No

Yes

Detail Clear Coat Strength Texture

Sets the detail texture that contains a clear coat strength map for the material. Kanzi reads the strength from the Red channel of the texture. Use the Clear Coat Strength Factor and Clear Coat Strength Texture properties to scale the strength from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture.

No

Yes

Detail Diffuse Color Factor

Sets the detail diffuse color for the material. Kanzi alpha blends the detail diffuse color with the standard diffuse color.

No

Yes

Detail Diffuse Color Texture

Sets the detail texture that contains the diffuse color for the material. Use the Detail Diffuse Color Factor property to filter the value from this texture. Kanzi alpha blends the detail diffuse color with the standard diffuse color. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture.

No

Yes

Detail Emissive Factor

Sets the color of the light that is emitted from a detail texture for the material. This color affects the local material rendering, but the light is not cast to other objects. The detail emissive light is alpha blended with the standard emissive light. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture.

No

Yes

Detail Emissive Texture

Sets the detail texture that contains the light emitted from the material. Use the Detail Emissive Factor property to scale the value from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture.

No

Yes

Detail Glossiness Texture

Sets the detail texture that contains a glossiness map for the material. Kanzi reads the glossiness from the Alpha channel of this texture. Use the Glossiness Factor and Glossiness Texture properties to scale the glossiness from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture.

No

Yes

Detail Metallic Texture

Sets the detail texture that contains a metallic map for the material. Kanzi reads the metalness from the Blue channel of this texture. Use the Metallic Factor and Metallic Texture properties to scale the metalness from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture.

No

Yes

Detail Normal Scale

Sets the detail normal scale for the material. Use the scale to set the intensity of the Detail Normal Texture.

No

Yes

Detail Normal Texture

Sets the detail texture that contains a normal map for the material. Use the Detail Normal Scale property to scale the texture value.

No

Yes

Detail Occlusion Strength

Sets the detail occlusion strength for the material. Use the strength to set the intensity of the Detail Occlusion Texture.

No

Yes

Detail Occlusion Texture

Sets the detail texture that contains an occlusion map for the material. Kanzi reads the occlusion from the Red channel of this texture. Use the Detail Occlusion Strength property to scale the occlusion from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture.

No

Yes

Detail Roughness Texture

Sets the detail texture that contains a roughness map for the material. Kanzi reads the roughness from the Green channel of the texture. Use the Roughness Factor and Roughness Texture properties to scale the roughness from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture.

No

Yes

Detail Specular Color Factor

Sets the detail specular color for the material. Kanzi alpha blends the detail specular color with the standard specular color.

No

Yes

Detail Specular Color Texture

Sets the detail texture that contains the specular color for the material. Use the Detail Specular Color Factor property to filter the value from this texture. Kanzi alpha blends the detail specular color with the standard specular color. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture.

No

Yes

Detail Texture Offset

Sets the detail texture offset for the material. Kanzi adds this value to the UVs to produce a second set of detail UVs to use for all detail texture properties.

No

Yes

Detail Texture Tiling

Sets the detail texture tiling factor for the material. Kanzi multiplies this value by the UVs to produce a second set of detail UVs to use for all detail texture properties.

No

Yes

Diffuse Color

The color of the material when it is lit by a light.

No

Yes

Diffuse Color Factor

Sets the diffuse color for the material.

No

Yes

Diffuse Color Texture

Sets the texture that contains the diffuse color for the material. Use the Diffuse Color Factor property to filter the value from this texture.

No

Yes

Disable KZB Export

Disables the exporting of the item into KZB. Can be used for, e.g. letting items out from certain profiles. The disabled items are always included in preview.

No

No

Down On Hover

Whether holding a finger on the device screen and moving it over the button transitions the button to the down state.

No

Yes

Drawn as Bounding Box

When enabled the object is drawn its solid bounding box.

No

Yes

Effectively Enabled

Indicates whether this node and its ancestor nodes are enabled. Use this property in state managers and bindings to observe whether a node is effectively enabled. To enable or disable a node, use the Enabled property. When a node is effectively disabled: - When that node is focused, it receives key input until the focus moves to another node. - When that node is not focused, it is not part of the focus chain and does not receive key input.

No

Yes

Emissive Color

The color of the light that is emitted from the material surface.

No

Yes

Emissive Factor

Sets the color of the light that is emitted from the material. This color affects the local material rendering, but the light is not cast to other objects.

No

Yes

Emissive Texture

Sets the texture that contains the light emitted from the material. Use the Emissive Factor property to scale the value from this texture.

No

Yes

Enabled

Whether this node is enabled. When you disable this property in a node, that node and its descendant nodes in the same overlay focus scope are effectively disabled. Effectively disabling a node removes that node from the focus chain and cancels all the active input manipulators.Use the Effectively Enabled property to observe whether a node is effectively enabled.

No

Yes

Environment Ambient Factor

Sets the strength of the cubemap texture to use for ambient environment light. Use the Environment Ambient Texture property to set the cubemap texture. The ambient environment light affects diffuse lighting in image based lighting.

No

Yes

Environment Ambient Texture

Sets the cubemap to use for the ambient environment light for the material. This cubemap affects the diffuse lighting during image based lighting. Use the Environment Ambient Factor property to set the strength of the cubemap texture.

No

Yes

Environment Reflection Factor

Sets the strength of the cubemap texture to use for specular environment light. Use the Environment Reflection Texture property to set the cubemap texture. The specular environment light affects reflective lighting in image based lighting.

No

Yes

Environment Reflection Texture

Sets the cubemap to use for the specular environment light for the material. This cubemap affects reflective lighting during image based lighting. Use the Environment Reflection Factor property to set the strength of the cubemap texture.

No

Yes

Export in Asset Package

When enabled, this item is exported into asset package if this project is saved as one.

No

No

Exposure

Sets the exposure compensation for the material. The exposure compensation emulates camera exposure by controlling the total amount of light rendered. Use a negative value to darken the rendered image, and a positive value to lighten the image. Exposure is exponential: 1.0 is twice as bright as 0.0, and -1.0 is half as bright as 0.0.

No

Yes

Face to Camera Mode

Sets how to rotate the 3D node towards a camera: - Disabled does not make the node turn to the camera. - Look at rotates the node along all axes to turn to the camera. - Billboarding keeps the node perpendicular to the camera FOV. - Cylindrical rotates the node along the y axis to turn to the camera.

By default the node turns to the Scene default camera. To use a different camera, set the Face to Camera Target Camera property.

No

Yes

Face to Camera Target Camera

Sets the camera towards which the 3D node turns when you set the Face to Camera Mode property. The default is the Scene default camera.

No

Yes

Final Transformation

The combined location, orientation and scale of the node and its ancestor nodes. Automatically calculated by the system.

No

Yes

Fixed Character Width

When set, overrides the font advance widths to make each character take a fixed amount of space specified in pixels.

No

Yes

Focus On Press

Sets where to set the focus when the user presses the node that has this property: - None (0) keeps the focus where it was. This is the default. - Node (1) sets the focus to the node. - Node or ancestor (2) sets the focus to the node or, if that fails, to the closest focusable ancestor node. - Node or overlay (3) sets the focus to the node or, if that fails, to the closest ancestor overlay scope, which then forwards the focus according to its settings.

The descendants of the node where you set this property inherit value of the property.

No

Yes

Focus Order

Sets the focus chain order of the node within the focus scope.

No

Yes

Focus Scope Type

Sets the type of the focus scope node: - Group groups focusable nodes. - Fence keeps the focus chain navigation inside the scope and does not allow the focus chain navigation to enter or leave that scope. - Modal overlay blocks the key and touch input that originates outside of its boundaries and keeps the focus navigation within the scope boundaries. - Auto-Closing Modal overlay loses focus when key or touch input originates from a node that is outside of its node tree, and suppresses that input. - Modeless overlay propagates the key and touch input that originates outside of its boundaries to the nodes outside of its boundaries. - Auto-Closing Modeless overlay loses focus when key or touch input originates from a node that is outside of its boundaries, and propagates that input.

No

Yes

Focus State

Reports the focus state of a node: - No focus (0) indicates that the node is not focused. For a focus scope node indicates that none of the nodes in the scope have focus. - Logical focus (1) indicates that the node is the logical focus node of an overlay-type focus scope. For a focus scope node indicates that one of the nodes in that scope is the logical focus node. - Key focus (2) indicates that the node is the key focus node of the application and receives key input. For a focus scope node indicates that one of the nodes in that scope is the key focus node.

Use this property in state managers and bindings to implement focus states in the UI nodes.

To observe whether a node is the key focus node, you can use the boolean Focus > Focused property.

No

Yes

Focusable

Indicates whether the node can receive focus.

No

Yes

Focused

Indicates whether the node has the key focus.

No

Yes

Font Color

Sets the color of the text.

No

Yes

Font Family

The font family used to render the text.

No

Yes

Font Hinting Preference

Sets the hinting preference of the font. - No hinting: Render text without hinting the outlines of glyphs. - Native hinting: Prefer native hinter of the font over the auto-hinter of the rasterizer. - Auto hinting: Prefer auto-hinter of the rasterizer over the native hinter of the font.

No

Yes

Font Material

Sets the material whose shader is used to render the text. The shader must use the ContentTexture uniform which is automatically filled with glyph data.

No

Yes

Font Size

Sets the size of the font in pixels.

No

Yes

Font Style

Sets the style of the FontStyleConcept.

No

Yes

Font Weight

Sets the weight of the FontStyleConcept.

No

Yes

FOV

The field of view of the camera in degrees.

No

Yes

FOV Type

Defines the direction of the field of view to either x or y.

No

Yes

Fractional Character Width

Sets whether Kanzi uses fractional or rounded character widths to lay out text. In most cases fractional widths provide the best result. However, with small font sizes, fractional widths can cause the characters to run together or have too much space, making it difficult to read. - When enabled, Kanzi uses fractional character widths, which means that the spacing between characters varies and can be a fraction of a pixel. - When disabled, Kanzi uses character widths rounded to the nearest pixel. Disable fractional widths when you want to fix character spacing in whole-pixel increments and prevent characters in small font sizes from running together.

No

Yes

Frustum Cull Margin

The margin of the frustum cull radius of the node. For example, set the margin when a vertex shader modifies the geometry of the node. To use this property, enable the Frustum Culling property in the Draw Objects Render Pass you use to render the node.

No

Yes

Global Ambient Color

The color that is multiplied automatically with the “Ambient” property of the materials in the scene.

No

Yes

Glossiness Factor

Sets the glossiness of the material: 0 represents a rough, diffuse surface, and 1 represents a smooth, glossy surface.

No

Yes

Glossiness Texture

Sets the texture that contains a glossiness map for the material. Kanzi reads the glossiness from the Alpha channel of this texture. Use the Glossiness Factor property to scale the glossiness from this texture.

No

Yes

Glyph Texture

The automatic texture of the glyph cache.

No

Yes

Hit Testable

When enabled, the node can be hit tested. Enabling Hit Testable for a 2D node enables hit testing only for that node. Enabling Hit Testable for a 3D node enables hit testing also for the child nodes. Kanzi hit tests 3D nodes using the default Camera node or the Hit Test Camera node of the active Scene node.

No

Yes

Hit Testable Container

When enabled, Kanzi uses the layout bounds as geometry for hit testing.

No

Yes

Hold Interval

Sets the amount of time in milliseconds that the user must hold the button pressed down for Kanzi to recognize it as a long-press gesture. To disable the long-press gesture, set to 0.

No

Yes

Horizontal Alignment

The alignment in horizontal direction the node should use when it resides under a layout.

No

Yes

Horizontal Fit

Whether to horizontally scale the glyphs to make them fit into the Layout Width of the Text Block. To adjust the scale, use the Horizontal Fit Scale Limits property.

No

Yes

Horizontal Fit Scale Limits

When the Horizontal Fit property is enabled, sets the minimum and maximum scale for glyphs when the width of text in a Text Block does not match the Layout Width of that Text Block. For example: - Min property field set to 1.0 does not squeeze the glyphs, while 0.5 squeezes the glyphs to half their size. - Max property field set to 1.0 does not stretch the glyphs, while 2.0 stretches the glyphs to double their size.

No

Yes

Horizontal Margin

Sets the horizontal space between this node and other nodes that are adjacent to this node in a layout. To set the Horizontal Margin property fields in a binding use: - Vector_X to access the Left property field - Vector_Y to access the Right property field

No

Yes

Horizontal Padding

Sets the padding spaces between the content and the left and right boundaries of the Text node.

No

Yes

Hover

Indicates whether a node is the foremost hit testable node under the cursor.

No

Yes

Index In Group

Sets the index of the Button in the Toggle Button Group to which that Button is registered. If a Button does not have local value for this property, it is not registered to the ancestor Toggle Button Group. When set to -1 the Toggle Button Group assigns an index for the Button.

No

Yes

Is Down

Indicates whether the button is pressed and in the down state.

No

Yes

Is Value Changing

Whether the value is currently changing.

No

Yes

Item Index

Reports the index of the item in the List Box Item Container.

No

Yes

Layout Depth

The size of the node in depth direction when used in a layout. Overrides the default bounds of the item.

No

Yes

Layout Height

The height of the node when used in a layout. Overrides the default bounds of the item.

No

Yes

Layout Transformation

The location, orientation and scale of the node relative to its parent node. Layout Transformation affects the layout. If you do not want to affect the layout, use Render Transformation.

No

Yes

Layout Width

The width of the node when used in a layout. Overrides the default bounds of the item.

No

Yes

Left Image

The image to use in the center-left.

No

Yes

Line Spacing

Sets the line spacing in multiples of the normal line height of the selected FontStyleConcept.

No

Yes

Look At

Makes a node to always face the node set in this property.

No

Yes

Mask Texture

The texture for masking other texture or color.

No

Yes

Mask Texture Offset

Sets an offset for mask in materials.

No

Yes

Mask Texture Tiling

Determines the number of times a mask is presented in a material

No

Yes

Maximum Distance From Curve

The distance from the curve where hit testing succeeds.

No

Yes

Maximum Value

The maximum value that the range allows.

No

Yes

Metallic Factor

Sets the metalness of the material: 0 represents a non-metallic or dielectric object, and 1 represents a metallic object.

No

Yes

Metallic Texture

Sets the texture that contains a metallic map for the material. Kanzi reads the metalness from the Blue channel of this texture. Use the Metallic Factor property to scale the value from this texture.

No

Yes

Minimum Area

When using #LodTypeScreenArea in the parent level of detail, use this property in the child of the level of detail to set the minimum screen area covered by the child in proportion to the screen size in range [0, 1].

No

Yes

Minimum Distance

When using #LodTypeDistance in the parent level of detail, use this property in the child of the level of detail to set the minimum distance from the camera to the level of detail in range [0, Inf].

No

Yes

Minimum Value

The minimum value that the range allows.

No

Yes

Node.Path

Full path to the node.

No

Yes

Normal Scale

Sets the normal scale for the material. Use the scale to set the intensity of the Normal Texture.

No

Yes

Normal Texture

Sets the texture that contains a normal map for the material. Use the Normal Scale property to scale the texture value.

No

Yes

Normalized Value

The current value normalized to range [0, 1].

No

Yes

Occlusion Strength

Sets the occlusion strength for the material. Use the strength to set the intensity of the Occlusion Texture.

No

Yes

Occlusion Texture

Sets the texture that contains an occlusion map for the material. Use the Occlusion Strength property to scale the occlusion from the texture.

No

Yes

Opacity

Opacity of the node.

No

Yes

Orthogonal Plane Size

The value used for scaling the view area of a relative orthographic camera.

No

Yes

Orthogonal Type

Defines the type of the orthogonal coordinate system. In the absolute mode the camera uses pixel coordinates. In the relative mode the camera displays an area whose width is -1..1 scaled with the value set by the Orthogonal Plane Size property.

No

Yes

Overflow

Sets the characters that represent the truncated text when the text does not fit in this node. The default value is ‘…’. By default, Kanzi truncates the text at the end. Use the Truncation Direction property to set the part of the text that you want to truncate.

No

Yes

Override Material

Sets the override material to use to render the content of the 2D prefab in the Viewport 3D node. In the Viewport 3D node, bind a texture property of the override material to the Viewport3D.PrefabTexture property.

No

Yes

Prefab Template

Sets the 2D prefab whose content the Viewport 3D node renders in 3D space.

No

Yes

Projection Type

Defines the camera type to either perspective or orthographic camera.

No

Yes

Remove Side Bearings

Whether to position the leftmost characters of left-aligned text and rightmost characters of right-aligned text exactly within the boundary of the text node.

No

Yes

Render Transformation

The location, orientation, and scale of the node relative to its parent node. Render transformation does not affect the layout of the node.

No

Yes

Right Image

The image to use in the center-right.

No

Yes

Roughness Factor

Sets the roughness of the material: 0 represents a smooth, glossy surface, and 1 represents a rough, diffuse surface.

No

Yes

Roughness Texture

Sets the texture that contains a roughness map for the material. Kanzi reads the roughness from the Green channel of the texture. Use the Roughness Factor property to scale the roughness from this texture.

No

Yes

Row

The row into which grid layout places the item.

No

Yes

Row Span

Defines the number of rows an item in a grid layout occupies.

No

Yes

Selected

Indicates whether the List Box item held by this List Box Item Container is selected. The List Box sets the value of this property.

No

Yes

Selected Item Index

Sets the index of the item that is currently selected in the List Box node. A List Box node updates this property when the user scrolls that List Box node. By setting the value of this property to the index of the item that you want to select in a List Box, you can select that item.

No

Yes

Side

The docking side of an item in the dock layout.

No

Yes

Snap Character To Pixel

Sets whether Kanzi positions characters in 2D rendering to the nearest pixel: - When enabled, text sharpness improves, but some characters can shift a fraction of a pixel. - When disabled, certain combinations of screen resolution, use of anti-aliasing, and font size can cause the text to appear blurry. In that case, you can improve the appearance of the text with the Fractional Character Width and Character Spacing properties.

No

Yes

Specular Anti-Aliasing Strength

Sets the strength of the specular anti-aliasing effect. Higher value results in blurrier specular highlights. For no specular anti-aliasing, set the value to 0. For full specular anti-aliasing, set the value to 1. The default value is 0.25.

No

Yes

Specular Anti-Aliasing Threshold

Sets the upper limit for the amount of specular anti-aliasing effect to apply. The default value is 0.18.

No

Yes

Specular Color

The color of the specular reflection.

No

Yes

Specular Color Factor

Sets the specular color for the material.

No

Yes

Specular Color Texture

Sets the texture that contains the specular color for the material. Use the Specular Color Factor property to filter the value from this texture.

No

Yes

Specular Exponent

Determines the size of the specular highlight.

No

Yes

State Manager

Sets the State Manager to the node.

No

Yes

Step Value

The minimum amount that the value of the range can change at a time.

No

Yes

Stretch

Whether to scale this Trajectory Layout to match the layout size.

No

Yes

Style

Sets a style to the node.

No

Yes

Tags

List of tags attached to the item

No

No

Text

Sets the text content that the text node renders. To create a line break press Shift+Enter.

No

Yes

Text Horizontal Alignment

Sets the horizontal alignment of the text.

No

Yes

Text Vertical Alignment

Sets the vertical alignment of the text.

No

Yes

Texture

The texture of the material.

No

Yes

Texture 0

Sets the first texture you want the Blit Render Pass to blit.

No

Yes

Texture 1

Sets the second texture you want the Blit Render Pass to blit.

No

Yes

Texture 2

Sets the third texture you want the Blit Render Pass to blit.

No

Yes

Texture 3

Sets the fourth texture you want the Blit Render Pass to blit.

No

Yes

Texture Offset

Sets an offset for texture in materials.

No

Yes

Texture Tiling

Determines the number of times a texture is presented in a material.

No

Yes

Toggle State

Sets the toggle state of the Button.

No

Yes

Toggle State Count

Sets the number of toggle states of the Button.

No

Yes

Tone Map Linear Scale

Sets the scale for the linear tonemap option for the material. When linear tonemapping is used, Kanzi divides all output color by the value of this property.

No

Yes

Top Image

The image to use in the middle of the top row.

No

Yes

Top-Left Image

The image to use in the top-left corner.

No

Yes

Top-Right Image

The image to use in the top-right corner.

No

Yes

Trajectory Override Offset

Sets the offset of an item in a Trajectory Layout. When you do not set this property, the Trajectory Layout sets the offset.

No

Yes

Transition Phase

The phase of the transition. For example, use for pixel-based effects.

No

Yes

Truncation

Sets how Kanzi truncates text when either Truncation or Overflow property is set and the text does not fit in this node: - None disables text truncation. - At character truncates text character by character. Default value. - At word truncates text by entire words.

No

Yes

Truncation Direction

Sets which part Kanzi truncates when either the Truncation or Overflow property is set and the text does not fit in this node: - Trailing truncates single- and multiline text at the end. Default value. - Center truncates single-line text in the middle. For multiline text, truncates entire lines from the middle, if the text does not fit in the height of this node, and clips text that does not fit in the width of this node. - Leading truncates single-line text in the beginning. For multiline text, truncates entire lines from the beginning, if the text does not fit in the height of this node, and clips text that does not fit in the width of this node.

No

Yes

Two Pass Rendering

Defines whether the Text Block 3D is rendered in two passes. Disabling the two pass rendering improves performance, but can cause invalid rendering results when glyph bounds overlap.

No

Yes

Use Viewport Aspect Ratio

Whether to use the aspect ratio setting from the viewport in render pass. If not, you can set the aspect ratio in the camera.

No

Yes

Value

The current value.

No

Yes

Vertical Alignment

The alignment in vertical direction the node should use when it resides under a layout.

No

Yes

Vertical Margin

Sets the vertical space between this node and other nodes that are adjacent to this node in a layout. To set the Vertical Margin property fields in a binding use: - Vector_X to access the Bottom property field - Vector_Y to access the Top property field

No

Yes

Vertical Padding

Sets the padding spaces between the content and the top and bottom boundaries of the Text node.

No

Yes

Visible

When disabled, Kanzi does not render the node.

No

Yes

Visible Amount in Parent

Sets the amount the node is inside its parent. Use the value of this property in shaders to implement fades. Calculated by the parent node.

No

Yes

Word Wrap

Sets whether to break long lines into multiple lines to make the text fit within the boundaries of the Text Block node.

No

Yes

Z Far

The distance of the camera far clipping plane. The camera shows only the objects that are closer than the value set in this property.

No

Yes

Z Near

The distance of the camera near clipping plane. The camera shows only the objects that are farther away than the value set in this property.

No

Yes

Camera messages

Name

Description

Inherited

Exported to Kanzi Engine

Activity Host: Activity Prefab Attached

An Activity Host sends this message when it attaches the prefab of the Activity that is activated.

No

Yes

Activity Host: Activity Prefab Detached

An Activity Host sends this message when it detaches the prefab of the Activity that is deactivated.

No

Yes

Activity: Activated

An Activity sends this message when it is activated.

No

Yes

Activity: Activating

An Activity sends this message when it is in the activating state.

No

Yes

Activity: Deactivated

An Activity sends this message when it is deactivated.

No

Yes

Activity: Deactivating

An Activity sends this message when it is in the deactivating state.

No

Yes

Activity: Status Changed

An Activity sends this message when the value of its Activity Status property changes.

No

Yes

Animation Player: Completed

Occurs when animation player completes animation playback.

No

Yes

Animation Player: Started

Occurs when animation player starts animation playback.

No

Yes

Animation Player: Stopped

Occurs when animation player stops animation playback.

No

Yes

Button: Cancel

Occurs when a user lifts their finger outside of a Button that they previously pressed.

No

Yes

Button: Click

Occurs when a user lifts their finger on top of a Button that they previously pressed and when the time set by the Auto Press Interval property in the pressed Button expires.

No

Yes

Button: Down

Occurs when the user presses down the Button.

No

Yes

Button: Enter

Button: Enter trigger is set off: - When the user presses down the button. - When the user presses down the button, moves the pointer outside of the button area, and then moves the pointer back to the button area while still holding down the pointer.

No

Yes

Button: Leave

Button: Leave trigger is set off: - When the user presses down the button and then lifts the pointer. - When the user presses down the button and then moves the pointer outside of the button area. - When the user sets off a Button : Long Press trigger.

No

Yes

Button: Long Press

Occurs when the user presses down a Button and holds the Button pressed for the amount of milliseconds defined in the Hold Interval property of that Button.

No

Yes

Click: Begin

Occurs when the user presses a hit-testable node with a Click Manipulator.

You cannot use this trigger with nodes that handle input by default, such as Button and Toggle Button nodes.

No

Yes

Click: Cancel

Occurs when the user first presses a hit-testable node with a Click Manipulator, then moves the pointer outside of the node area, and lifts the pointer.

You cannot use this trigger with nodes that handle input by default, such as Button and Toggle Button nodes.

No

Yes

Click: Click

Occurs when the user presses and releases a hit-testable node with a Click Manipulator, while the pointer is still within the node area and Kanzi does not recognize another gesture.

You cannot use this trigger with nodes that handle input by default, such as Button and Toggle Button nodes.

No

Yes

Click: Enter

Occurs when the user presses a hit-testable node with a Click Manipulator and then every time the user moves the pointer on top of that node while still holding down the pointer.

You cannot use this trigger with nodes that handle input by default, such as Button and Toggle Button nodes.

No

Yes

Click: Leave

Occurs when the user presses a hit-testable node with a Click Manipulator and then every time the user moves the pointer outside of that node.

You cannot use this trigger with nodes that handle input by default, such as Button and Toggle Button nodes.

No

Yes

Command: Command

Command message arguments

No

Yes

Data Trigger

Monitors changes in properties and data source values. Use a Data Trigger to apply an action to either set a property value of a target node or activate an Activity node.

No

Yes

Drag and Drop Manipulator: Drag and Drop Canceled

Occurs when focus moves away from the node during the drag-and-drop gesture.

No

Yes

Drag and Drop Manipulator: Drag and Drop Finished

Occurs when the user lifts their finger after starting the drag-and-drop gesture.

No

Yes

Drag and Drop Manipulator: Drag and Drop Moved

Occurs when the user moves their finger after starting the drag-and-drop gesture.

No

Yes

Drag and Drop Manipulator: Drag and Drop Started

Occurs when the user holds their finger for 500ms on the node.

No

Yes

Focus: About To Gain Focus

Kanzi sends this message before a focusable node receives focus.

No

Yes

Focus: About To Lose Focus

Kanzi sends this message before the focused node loses focus.

No

Yes

Focus: Focus Entered Focus Scope

When focus enters a focus scope, Kanzi sends this message to the focus scope node that contains the node that gains focus.

No

Yes

Focus: Focus Gained

Kanzi sends this message to the node that received focus.

No

Yes

Focus: Focus Left Focus Scope

When focus leaves a focus scope, Kanzi sends this message to the focus scope node that contains the node that loses focus.

No

Yes

Focus: Focus Lost

Kanzi sends this message to the node that lost focus.

No

Yes

Focus: Input Outside Overlay

Kanzi sends this message to an overlay focus scope when the application area outside the boundaries of that overlay receives input.

No

Yes

Focus: Overlay Brought To Front

Occurs when an overlay focus scope becomes the foremost overlay scope in the overlay focus scope stack.

No

Yes

Focus: Overlay Gained Focus

When an overlay scope gains focus, Kanzi sends this message to the overlay scope node that contains the node that gains focus.

No

Yes

Focus: Overlay Lost Focus

When an overlay scope loses focus, Kanzi sends this message to the overlay scope node that contains the node that loses focus.

No

Yes

Focus: Overlay Sent To Back

Occurs when an overlay focus scope is no longer the foremost overlay scope in the overlay focus scope stack.

No

Yes

Focus: Scope Brought To Front (deprecated)

Occurs when an overlay focus scope is brought to front. Deprecated. Use Overlay Brought To Front instead.

No

Yes

Focus: Scope Sent To Back (deprecated)

Occurs when a foremost overlay focus scope is sent to back. Deprecated. Use Overlay Sent to Back instead.

No

Yes

Key Input: Key Canceled

Occurs when Kanzi recognizes a key-canceled gesture. A key-canceled gesture occurs when Kanzi recognizes that the user canceled a gesture.

No

Yes

Key Input: Key Navigation Canceled

Occurs when the key-pressed gesture is canceled for the navigation direction.

No

Yes

Key Input: Key Navigation Finished

Occurs when Kanzi recognizes the key-released gesture for the navigation direction. To capture key navigation gestures for a node, create a Navigation Manipulator component in that node.

No

Yes

Key Input: Key Navigation Started

Occurs when Kanzi recognizes the key-pressed and key repeat gestures for the navigation direction. To capture key navigation gestures for a node, create a Navigation Manipulator component in that node.

No

Yes

Key Input: Key Pressed

Occurs when Kanzi recognizes a key-pressed gesture. A key-pressed gesture occurs when Kanzi recognizes a key event that contains all the elements that compose that gesture.

No

Yes

Key Input: Key Released

Occurs when Kanzi recognizes a key-released gesture. A key-released gesture occurs when Kanzi recognizes the release of one of the elements that compose that gesture.

No

Yes

List Box: Item Hidden

Occurs when an item is unloaded from the working memory. To set how many items you want to keep loaded in the working memory at a time, use the Keep Alive Item Count property.

No

Yes

List Box: Item Selected

Occurs when an item is selected.

No

Yes

List Box: Item Visible

Occurs when an item is loaded to the working memory. To set how many items you want to keep loaded in the working memory at a time, use the Keep Alive Item Count property.

No

Yes

List Box: Scroll Finished

Occurs when the List Box stops scrolling.

No

Yes

List Box: Scroll Started

Occurs when the List Box starts to scroll.

No

Yes

List Box: Scrolled

Occurs when the List Box scrolls.

No

Yes

List Box: Target Changed

Occurs when List Box gets a new target item.

No

Yes

List Box: User Scroll Finished

Occurs when the application user stops scrolling the List Box.

No

Yes

List Box: User Scroll Started

Occurs when the application user starts to scroll the List Box.

No

Yes

Long Press: Long Press

Occurs when the user presses a hit-testable node with a Long-Press Manipulator and holds the press for the time that you set in the Long-Press Manipulator.

You cannot use this trigger with nodes that handle input by default, such as Button and Toggle Button nodes.

No

Yes

Long Press: Long Press Cancel

Occurs during the long-press gesture when the user moves the focus away from a hit-testable node with a Long-Press Manipulator.

You cannot use this trigger with nodes that handle input by default, such as Button and Toggle Button nodes.

No

Yes

Message Trigger

No

Yes

Multi-Click: Intermediate Click

Occurs when the user presses and releases a hit-testable node with a Multi-Click Manipulator that is set to send messages for intermediate clicks.

To set a Multi-Click Manipulator to send messages for intermediate clicks, in the Multi-Click Manipulator enable the Send Intermediate Click Messages property.

You cannot use this trigger with nodes that handle input by default, such as Button and Toggle Button nodes.

No

Yes

Multi-Click: Multi-Click

Occurs when the user presses and releases a hit-testable node with a Multi-Click Manipulator a specified number of times (default 2) within a set amount of time (default 250 ms) between presses.

You cannot use this trigger with nodes that handle input by default, such as Button and Toggle Button nodes.

No

Yes

Multi-Click: Multi-Click Canceled

Occurs during the multi-click gesture when the user moves the focus away from a hit-testable node with a Multi-Click Manipulator.

You cannot use this trigger with nodes that handle input by default, such as Button and Toggle Button nodes.

No

Yes

On Attached

This trigger is set off when the item is initialized. For example, when you add a node to the node tree, or enter a state that contains this trigger.

No

Yes

On Property Change

Occurs when a property is changed

No

Yes

On Timer

Occurs when timer interval is elapsed

No

Yes

Page Host: Page Navigation Finished

Page host has finished navigation process.

No

Yes

Page Host: Page Navigation Started

Page host has started navigation process.

No

Yes

Page: Activated

Page has been activated.

No

Yes

Page: Deactivated

Page has been deactivated.

No

Yes

Pan Manipulator: Pan Canceled

Occurs when focus moves away from the node during the pan gesture.

No

Yes

Pan Manipulator: Pan Entered

Occurs when the pan gesture enters the node the manipulator is attached to.

No

Yes

Pan Manipulator: Pan Finished

Occurs when the user lifts their finger after Kanzi recognizes a pan gesture.

No

Yes

Pan Manipulator: Pan Left

Occurs when the pan gesture leaves the node the manipulator is attached to.

No

Yes

Pan Manipulator: Pan Moved

Occurs when the user changes the position of their finger and that change exceeds the recognition thresholds.

No

Yes

Pan Manipulator: Pan Started

Occurs when the user presses down their finger on the node. If the user lifts their finger before exceeding the position change threshold, Kanzi cancels the pan gesture.

No

Yes

Pinch Manipulator: Pinch Canceled

Occurs when focus moves away from the node during the pinch gesture.

No

Yes

Pinch Manipulator: Pinch Finished

Occurs when the user lifts their finger after Kanzi recognizes a pinch gesture.

No

Yes

Pinch Manipulator: Pinch Moved

Occurs when the user changes the position of their finger and that change exceed the scale or rotation threshold.

No

Yes

Pinch Manipulator: Pinch Started

Occurs when the user presses down their finger. If the user lifts their finger before it exceeds the scale or rotate threshold, Kanzi cancels the pinch.

No

Yes

Prefab View: Asynchronous Load Completed

Occurs when asynchronous loading of resources from a prefab has been finished.

No

Yes

Property Target Easing Interpolator: Easing Interpolation Completed

Occurs when Property Target Easing Interpolator completes its interpolation.

No

Yes

Property Target Interpolator: Interpolation Completed

Occurs when property target interpolator completes interpolation.

No

Yes

Range: Value Change Finished

Occurs when the range value stops changing.

No

Yes

Range: Value Change Started

Occurs when the range value starts changing.

No

Yes

Range: Value Changed

Occurs when the range value has changed.

No

Yes

Scroll View: Scroll Ended

Occurs when the scroll position of a Scroll View node stops changing.

No

Yes

Scroll View: Scroll Started

Occurs when the scroll position of a Scroll View node starts changing.

No

Yes

Scroll View: Scroll Zoomed

Occurs when the zoom level of a Scroll View node changes.

No

Yes

Scroll View: Scrolled

Occurs when the scroll position of a Scroll View node changes.

No

Yes

Scroll View: Snap Request

Occurs when a Scroll View node requests snapping target from the hosting component.

No

Yes

Scroll View: User Scroll Ended

Occurs when the user stops scrolling a Scroll View node.

No

Yes

Scroll View: User Scroll Started

Occurs when the user starts scrolling a Scroll View node.

No

Yes

State Manager: Entered State

Occurs when a state manager has entered a state.

No

Yes

State Manager: Left State

Occurs when a state manager has left a state.

No

Yes

State Manager: Transition Finished

Occurs when a state manager finishes a transition to a state.

No

Yes

State Manager: Transition Started

Occurs when a state manager begins a transition to a state.

No

Yes

Text Box: Composition Text Changed

Occurs when the text produced in an Input Method Editor is updated in a Text Box node.

No

Yes

Text Box: Composition Text Committed

Occurs: - When the text produced in an Input Method Editor is committed to the cached text in a Text Box node. - When a trigger executes the Commit Composition Text action.

No

Yes

Text Box: Cursor Moved

Occurs when the user moves the cursor in a Text Box node.

No

Yes

Text Box: Editing Finished

Occurs when a Text Box node leaves the editing state after the user modified the text content.

No

Yes

Text Box: Editing Started

Occurs when the user makes the first modification to the text in a Text Box node that is in the editing state.

No

Yes

Text Box: Entered Editing State

Occurs when a Text Box node enters the editing state.

No

Yes

Text Box: Input Method Action

Occurs when the user taps the action button on their on-screen keyboard while editing the text in a Text Box node.

No

Yes

Text Box: Input Method Available

Occurs when an input method becomes available to a Text Box node. For example, an on-screen keyboard becomes available when it appears on the screen.

No

Yes

Text Box: Input Method Unavailable

Occurs when the input method that is composing text in a Text Box node becomes unavailable. For example, an on-screen keyboard becomes unavailable when the user hides it.

No

Yes

Text Box: Left Editing State

Occurs when a Text Box node leaves the editing state

No

Yes

Text Box: Selection Changed

Occurs when the user changes the text selection in a Text Box node.

No

Yes

Text Box: Selection Cleared

Occurs when the user clears or resets the text selection in a Text Box node.

No

Yes

Text Box: Selection Started

Occurs when the user starts selecting text in a Text Box node.

No

Yes

Text Box: Text Changed

Occurs when the user changes the text in a Text Box node.

No

Yes

Text Box: Text Composition Canceled

Occurs: - When the text composition in a Text Box node is canceled by Input Method that is in text composition state. - When a trigger executes the Cancel Text Composition action.

No

Yes

Toggle Button Group: Toggled

Occurs when the toggle state of a Toggle Button node in a Toggle Button Group node changes.

No

Yes

Toggle Button: State Toggled

Occurs when the toggle state of the Button changes.

No

Yes

Toggle Button: Toggled Off

Occurs when the Button is toggled off.

No

Yes

Toggle Button: Toggled On

Occurs when the Button is toggled on.

No

Yes

See also

Camera nodes