Text Box 2D

Text Box 2D properties

Name	Description	Inherited	Exported to Kanzi Engine
Tags	List of tags attached to the item	No	No
Effective Data Context	The data context in the current node that is resolved from data context properties and bindings	No	No
Effective Activity Source	The data source for this Activity node.	No	No
Name	Name of the project item	No	No
Created	The time when the project item was created	No	No
Component Type	The component type of this component node	No	No
Font Size	Sets the size of the font in pixels.	No	Yes
Layout Width	The width of the node when used in a layout. Overrides the default bounds of the item.	No	Yes
Horizontal Padding	Sets the padding spaces between the content and the left and right boundaries of the Text node.	No	Yes
Vertical Padding	Sets the padding spaces between the content and the top and bottom boundaries of the Text node.	No	Yes

Text Box 2D available properties

Name	Description	Inherited	Exported to Kanzi Engine
Disable KZB Export	Disables the exporting of the item into KZB. Can be used for, e.g. letting items out from certain profiles. The disabled items are always included in preview.	No	No
Brush Color	Color for brush. Set alpha to 0 to disable brush.	No	Yes
Brush Texture	Texture for brush.	No	Yes
Composition Text Background Brush	Sets the brush that highlights the text that the user composes using an input method editor (IME).	No	Yes
Composition Text Foreground Brush	Sets the brush for the text that the user composes using an input method editor (IME).	No	Yes
Selection Background Brush	Sets the brush that highlights the selected text.	No	Yes
Selection Foreground Brush	Sets the brush for the selected text.	No	Yes
Align To Tangent	Whether to align the Trajectory List Box 3D items to match the tangent of the trajectory.	No	Yes
Allowed Scroll Axis	Sets the axis on which you want to allow this Trajectory List Box 3D node to scroll.	No	Yes
Cursor Offset	Sets the offset of the position to use to select the active item, in proportional range [0,1].	No	Yes
Dragging Acceleration	Sets the acceleration of the Trajectory List Box 3D when the user scrolls the Trajectory List Box 3D by dragging the pointer. The higher the value, the quicker the Trajectory List Box 3D reaches its final position. The default value is 80.	No	Yes
Dragging Drag	Sets the amount that drag affects the movement of the Trajectory List Box 3D when the user scrolls the Trajectory List Box 3D by dragging the pointer. The lower the value, the higher the drag and the quicker the scrolling stops. The default value is 150.	No	Yes
Dragging Impulse	Sets the amount of impulse to generate from the pointer movement when the user scrolls the Trajectory List Box 3D by dragging the pointer.	No	Yes
Item Area Begin	Sets the proportional offset where the part of the trajectory meant for the fully visible Trajectory List Box 3D items starts. Kanzi uses the values of the Item Area Begin and Item Area End properties to calculate the value of the Node.VisibleAmountInParent property for each list item.You can use the VisibleAmountInParent property in shaders to fade out those list items that are not fully visible.	No	Yes
Item Area End	Sets the proportional offset where the part of the trajectory meant for the fully visible Trajectory List Box 3D items ends. Kanzi uses the values of the Item Area Begin and Item Area End properties to calculate the value of the Node.VisibleAmountInParent property for each list item.You can use the VisibleAmountInParent property in shaders to fade out those list items that are not fully visible.	No	Yes
Looping	Whether to show items in the Trajectory List Box 3D from the beginning after reaching the last item.	No	Yes
Maximum Number of Touches	Sets the maximum number of touch points allowed on the Trajectory List Box 3D area for scrolling.	No	Yes
Minimum Number of Touches	Sets the minimum number of touch points required on the Trajectory List Box 3D area for scrolling.	No	Yes
Recognition Threshold	Sets the distance in pixels that the pointer has to move for the scrolling to start in the Trajectory List Box 3D.	No	Yes
Scroll Position	Sets the scroll position of the Trajectory List Box 3D along the x and y axes as a relative position within the list box area. Use this property to move the list to a scroll position immediately, without scrolling. To update the scroll position with a binding, use a two-way or to-source binding.	No	Yes
Scroll Sensitivity	Sets the amount that the scroll value changes relative to the movement of the pointer on the scroll view plane of the Trajectory List Box 3D. The default value 1 makes the Trajectory List Box 3D scroll the same amount as the user drags the pointer. For example, to set the Trajectory List Box 3D to scroll twice the amount that the user drags the pointer, set the value of the property to 2.	No	Yes
Sliding Acceleration	Sets the acceleration of the Trajectory List Box 3D after the user releases the pointer with which they scroll the Trajectory List Box 3D. The higher the value, the quicker the Trajectory List Box 3D reaches the scroll target. The default value is 40.	No	Yes
Sliding Drag	Sets how much drag affects the movement of the Trajectory List Box 3D after the user releases the pointer with which they scroll the Trajectory List Box 3D. The lower the value, the higher the drag and the quicker the scrolling of the Trajectory List Box 3D stops. The default value is 80.	No	Yes
Spacing	Sets the distance between the items in the Trajectory List Box 3D.	No	Yes
Swipe Distance	Sets the distance that a swipe sends the scroll value in the Trajectory List Box 3D, relative to the speed of the pointer.	No	Yes
Trajectory	Sets the trajectory along which the Trajectory List Box 3D arranges its items.	No	Yes
Composition Text	Reports the text that the user composes in the Text Box using an input method editor (IME).	No	Yes
Cursor Position	Sets the position of the cursor in the text shown in the Text Box node.	No	Yes
Cursor Prefab	Sets the prefab template that defines the appearance of the cursor instead of the default cursor.	No	Yes
Display Text	Reports the text that the Text Box displays.	No	Yes
Echo Mode	Sets how the Text Box node shows text: - Normal makes the inserted characters visible. - No Echo makes the inserted characters invisible. - Password makes the inserted character visible for a certain amount of time and then masks the character. Use the Password Masking Character property to set the masking character. The default is a bullet symbol. Use the Password Echo Timeout property to set the time in milliseconds that an inserted character is visible before masking.	No	Yes
Edit Mode	Sets how the Text Box node enters the editing state: - Automatic makes the Text Box enter the editing state when focused, and leave the editing state when focus is lost. - Triggered requires the user to trigger the Text Box to enter and leave the editing state.	No	Yes
Has Selection	Indicates whether any of the text in the Text Box node is selected.	No	Yes
Hide Text Hint When Editing	Sets whether to hide the placeholder content, which you set using the Text Hint Prefab property, when the Text Box node is in the editing state. To hide the placeholder content only when the user enters text in the Text Box node, disable this property.	No	Yes
Input Method Action	Sets the label of the user action button on the on-screen keyboard for this Text Box. By default uses the label of the default input method of the operating system.	No	Yes
Input Type	Sets the input type of the input methods that provide the input layout to let the user enter and edit text of specific type in the Text Box node: - Default for the default input type of the input method editor. - Numeric for numbers - Email for email addresses - URL for URL addresses	No	Yes
Is Composing Text	Reports the text composition state of the Text Box node.	No	Yes
Is Editing	Reports the editing state of the Text Box node.	No	Yes
Maximum Text Length	Sets the maximum length of text that the user can insert in the Text Box node. The unit is a UTF-8 character and the buffer byte length can be greater for multi-byte characters.	No	Yes
Password Echo Timeout	Sets the time in milliseconds that an inserted character is visible before being masked when using the password echo mode. To use the password echo mode, set the Echo Mode property to Password Echo.	No	Yes
Password Masking Character	Sets the character that masks each character that the application user enters when using the password echo mode. To use the password echo mode, set the Echo Mode property to Password.	No	Yes
Read Only	Sets whether the Text Box node is editable. When you enable this property, you can set the text only through the Text property and the user cannot edit the text in the Text Box node.	No	Yes
Selection End Cursor Position	The position of the cursor that marks the end of text selection in the Text Box node.	No	Yes
Selection End Prefab	Sets the prefab template that defines the appearance of the selection handle at the end of text selection instead of the default handle.	No	Yes
Selection Start Cursor Position	The position of the cursor that marks the beginning of text selection in the Text Box node.	No	Yes
Selection Start Prefab	Sets the prefab template that defines the appearance of the selection handle at the beginning of text selection instead of the default handle.	No	Yes
Text Hint Prefab	Sets the prefab template for showing placeholder content when the Text Box node is empty.	No	Yes
Text Key Navigation Direction	Sets the text key navigation direction.	No	Yes
Code Behind Source	Sets the metaclass name of the code behind class for this node.	No	Yes
Data Context	Source of data for this node and its descendants	No	Yes
Primary Direction	The direction along which the layout arranges items until the layout limit in that direction is reached.	No	Yes
Secondary Direction	The direction along which the flow layout arranges lines of the primary direction.	No	Yes
Columns	Defines the number of columns in a grid layout and how the grid layout distributes the content in columns.	No	Yes
Layout Direction	The direction in which the items are arranged when you add them to a grid layout.	No	Yes
Rows	Defines the number of rows in a grid layout and how the grid layout distributes the content in rows.	No	Yes
Items Source	Data object which provides data sources for list items.	No	Yes
Cell Height	Sets the height of each cell in the Grid List Box.	No	Yes
Cell Width	Sets the width of each cell in the Grid List Box.	No	Yes
Dragging Acceleration	Sets the acceleration of the Grid List Box when the user scrolls the Grid List Box by dragging the pointer. The higher the value, the quicker the Grid List Box reaches its final position. The default value is 80.	No	Yes
Dragging Drag	Sets the amount that drag affects the movement of the Grid List Box when the user scrolls the Grid List Box by dragging the pointer. The lower the value, the higher the drag and the quicker the scrolling stops. The default value is 150.	No	Yes
Dragging Impulse	Sets the amount of impulse to generate from the pointer movement when the user scrolls the Grid List Box by dragging the pointer.	No	Yes
Item Area Begin	Sets the proportional offset where the area meant for the fully visible items in the Grid List Box starts. Kanzi uses the values of the Item Area Begin and Item Area End properties to calculate the value of the Node.VisibleAmountInParent property for each list item.You can use the VisibleAmountInParent property in shaders to fade out those list items that are not fully visible.	No	Yes
Item Area End	Sets the proportional offset where the area meant for the fully visible items in the Grid List Box ends. Kanzi uses the values of the Item Area Begin and Item Area End properties to calculate the value of the Node.VisibleAmountInParent property for each list item.You can use the VisibleAmountInParent property in shaders to fade out those list items that are not fully visible.	No	Yes
Layout Direction	Sets the direction in which the Grid List Box arranges its items. When you change the layout direction you also change the scroll axis of the Grid List Box.	No	Yes
Maximum Number of Touches	Sets the maximum number of touch points allowed on the Grid List Box area for scrolling.	No	Yes
Minimum Number of Touches	Sets the minimum number of touch points required on the Grid List Box area for scrolling.	No	Yes
Recognition Threshold	Sets the distance in pixels that the pointer has to move for the scrolling to start in the Grid List Box.	No	Yes
Scroll Position	Sets the scroll position of the Grid List Box along the x and y axes as a relative position within the list box area. Use this property to move the list to a scroll position immediately, without scrolling. To update the scroll position with a binding, use a two-way or to-source binding.	No	Yes
Scroll Sensitivity	Sets the amount that the scroll position changes relative to the movement of the pointer. The default value 1 makes the Grid List Box scroll the same amount as the user drags the pointer. For example, to set the Grid List Box to scroll twice the amount that the user drags the pointer, set the value of the property to 2.	No	Yes
Scroll Speed	Reports the current scroll speed of the Grid List Box.	No	Yes
Scroll Target Position	Reports the current target scroll value of the Grid List Box.	No	Yes
Scrolling	Reports whether the Grid List Box is currently scrolling.	No	Yes
Sliding Acceleration	Sets the acceleration of the Grid List Box after the user releases the pointer with which they scroll the Grid List Box. The higher the value, the quicker the Grid List Box reaches the scroll target. The default value is 40.	No	Yes
Sliding Drag	Sets how much drag affects the movement of the Grid List Box after the user releases the pointer with which they scroll the Grid List Box. The lower the value, the higher the drag and the quicker the scrolling of the Grid List Box stops. The default value is 80.	No	Yes
Swipe Distance	Sets the distance that a swipe sends the scroll value in the Grid List Box, relative to the speed of the pointer.	No	Yes
Item Container Generator	Sets the name of the item container generator type to use to provide item containers dynamically for the List Box.	No	Yes
Item Container Template	Sets the List Box Item Container prefab that sets the appearance and behavior of the List Box items.	No	Yes
Item Generator	Sets the name of the item generator type to use to provide items dynamically to the List Box.	No	Yes
Item Template	Sets the prefab to use for the List Box items.	No	Yes
Keep Alive Item Count	Sets the size of the buffer for invisible List Box items. Kanzi returns to the Item Generator those invisible items that do not fit in the buffer.	No	Yes
Selection Behavior	Sets how the List Box behaves when the user selects an item. 'Bring to Center' sets the List Box to bring an item to the center of the List Box area when the user selects that item.	No	Yes
Allowed Scroll Axis	Sets the axis on which you want to allow this Scroll View node to scroll.	No	Yes
Dragging Acceleration	Sets the acceleration of the node controlled by a Scroll View node while you drag that Scroll View node. Use low values when you want that node to slowly reach the final position. Use high values when you want that node to quickly reach the final position.	No	Yes
Dragging Drag	Sets the amount that drag affects the movement of the node controlled by a Scroll View node while you drag that Scroll View node. The lower the value the higher the drag and the faster the sliding of that node stops.	No	Yes
Dragging Impulse	Sets the amount of impulse generated from the pointing device movement when dragging a Scroll View node.	No	Yes
Looping X Enabled	Sets the node controlled by a Scroll View node to start scrolling from the beginning when the scroll reaches the scroll bounds on the x axis. When the scroll value reaches the maximum value of the bound, the value changes to the minimum value and the other way around. Use the Scroll Bounds Minimum and Scroll Bounds Maximum properties to set the scroll bounds.	No	Yes
Looping Y Enabled	Sets the node controlled by a Scroll View node to start scrolling from the beginning when the scroll reaches the scroll bounds on the y axis. When the scroll value reaches the maximum value of the bound, the value changes to the minimum value and the other way around. Use the Scroll Bounds Minimum and Scroll Bounds Maximum properties to set the scroll bounds.	No	Yes
Maximum Number of Touches	Sets the maximum number of touch points allowed for a Scroll View pan.	No	Yes
Maximum Zoom	Sets the maximum zoom level.	No	Yes
Minimum Number of Touches	Sets the required number of touch points pressed for a Scroll View node pan to start. Scroll View nodes with minimum number of touches greater than one precede the children in touch processing.	No	Yes
Minimum Zoom	Sets the minimum zoom level.	No	Yes
Recognition Threshold	Sets the amount a pointing device must move for the scrolling to start on a Scroll View node.	No	Yes
Scroll Bounds Maximum	Sets the coordinates of the bottom-right corner of the scroll bounds rectangle. Scroll bounds define where the scrolling begins and ends.	No	Yes
Scroll Bounds Minimum	Sets the coordinates of the top-left corner of the scroll bounds rectangle. Scroll bounds define where the scrolling begins and ends.	No	Yes
Scroll Position	Sets the scroll position of the Scroll View along the x and y axes as a relative position within the scroll view area. Use this property to set the scroll position immediately, without scrolling. To update the scroll position with a binding, use a two-way or to-source binding.	No	Yes
Scroll Sensitivity	Sets the amount the position changes relative to the movement of the pointer that starts the swiping. The higher the value the more the position of the node controlled by a Scroll View node changes. The default value is 1.	No	Yes
Scroll Speed	The current scroll speed (read-only).	No	Yes
Scroll Target Position	The current target scroll value (read-only).	No	Yes
Scrolling	Whether a Scroll View node is currently scrolling (read-only).	No	Yes
Sliding Acceleration	Sets the acceleration of the node controlled by a Scroll View node after you release the pointer with which you swipe. Use low values when you want that node to slowly reach the final position. Use high values when you want that node to quickly reach the final position.	No	Yes
Sliding Drag	Sets the amount that drag affects the movement of the node controlled by a Scroll View node after you release the pointer with which you swipe. The lower the value the higher the drag and the faster the sliding of the object controlled by the Scroll View node stops.	No	Yes
Step Multiplier	Sets the smallest distance that a Scroll View scrolls.	No	Yes
Swipe Distance	Sets the distance that a swipe sends the scroll value, relative to the pointing device speed.	No	Yes
Zoom	Sets the current zoom level.	No	Yes
Zoom Affects Scrolling	Controls whether the scroll position is scaled, according to the zoom level.	No	Yes
Zoom Enabled	Sets whether to install a pinch manipulator that generates zoom messages.	No	Yes
Align To Tangent	Whether to align the items in this Trajectory Layout to match the tangent of the trajectory. Vertical trajectories are not supported.	No	Yes
Item Area Begin	Sets the starting point of the trajectory segment in which the items in this Trajectory Layout are considered fully visible. The value is in the range [0, 1], where 0 is the beginning and 1 is the end of the trajectory. The Node > Visible Amount in Parent property uses this value.	No	Yes
Item Area End	Sets the ending point of the trajectory segment in which the items in this Trajectory Layout are considered fully visible. The value is in the range [0, 1], where 0 is the beginning and 1 is the end of the trajectory. The Node > Visible Amount in Parent property uses this value.	No	Yes
Override Distance	Sets the distance between the items in this Trajectory Layout. When you do not set this property, the Trajectory Layout calculates the distance automatically.	No	Yes
Start Offset	Sets the offset of the starting position of the items on the trajectory in the range [0, 1], where 0 is the beginning and 1 is the end of the trajectory.	No	Yes
Trajectory	Sets the Trajectory along which this Trajectory Layout node arranges its items.	No	Yes
Foreground Brush	The foreground brush to paint the foreground of 2D nodes.	No	Yes
Layout Height	The height of the node when used in a layout. Overrides the default bounds of the item.	No	Yes
Global Ambient Color	The color that is multiplied automatically with the "Ambient" property of the materials in the scene.	No	Yes
Glyph Texture	The automatic texture of the glyph cache.	No	Yes
Font Color	Sets the color of the text.	No	Yes
Texture 1	Sets the second texture you want the Blit Render Pass to blit.	No	Yes
Texture 2	Sets the third texture you want the Blit Render Pass to blit.	No	Yes
Texture 3	Sets the fourth texture you want the Blit Render Pass to blit.	No	Yes
Texture 0	Sets the first texture you want the Blit Render Pass to blit.	No	Yes
Blend Intensity	Controls the intensity of materials that are blended on top of an existing color. Attached property enables overriding of the blend intensity of the used materials at render pass or object node level.	No	Yes
Alpha Cutoff	Sets the cutoff threshold for alpha cutting. If the alpha value is less than the value of this property, Kanzi discards the fragment. The default value is 0.5.	No	Yes
Ambient Color	The color of the material when lights are not present.	No	Yes
Base Color Factor	Sets the base color for the material.	No	Yes
Base Color Texture	Sets the texture that contains the base color for the material. Use the Base Color Factor property to filter the value from this texture.	No	Yes
BRDF Lookup Table	Gets the Bidirectional Reflectance Distribution Function (BRDF) lookup table for the material. The BRDF table is a texture that contains precomputed information about how light reflects off a material. You can use it to improve rendering quality.	No	Yes
Clear Coat Normal Scale	Sets the clear coat normal scale for the material. Use the scale to set the intensity of the Clear Coat Normal Texture.	No	Yes
Clear Coat Normal Texture	Sets the texture that contains a clear coat normal map for the material. Use the Clear Coat Normal Scale property to scale the texture value.	No	Yes
Clear Coat Roughness Factor	Sets the roughness of the outer clear coat layer for the material: 0 represents a smooth, glossy surface, and 1 represents a rough, diffuse surface.	No	Yes
Clear Coat Roughness Texture	Sets the texture that contains a clear coat roughness map for the material. Kanzi reads the roughness from the Green channel of the texture. Use the Clear Coat Roughness Factor property to scale the roughness from this texture.	No	Yes
Clear Coat Strength Factor	Sets the clear coat strength for the material: 0 represents a material with no clear coat, and 1 represents a full strength clear coat.	No	Yes
Clear Coat Strength Texture	Sets the texture that contains a clear coat strength map for the material. Kanzi reads the strength from the Red channel of the texture. Use the Clear Coat Strength Factor property to scale the strength from this texture.	No	Yes
Detail Base Color Factor	Sets the detail base color for the material. The detail base color is alpha blended with the standard base color.	No	Yes
Detail Base Color Texture	Sets the detail texture that contains the base color for the material. Use the Detail Base Color Factor property to filter the value from this texture. The detail base color is alpha blended with the standard base color. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture.	No	Yes
Detail Clear Coat Normal Scale	Sets the detail clear coat normal scale for the material. Use the scale to set the intensity of the Detail Clear Coat Normal Texture.	No	Yes
Detail Clear Coat Normal Texture	Sets the detail texture that contains a clear coat normal map for the material. Use the Detail Clear Coat Normal Scale property to scale the texture value.	No	Yes
Detail Clear Coat Roughness Texture	Sets the detail texture that contains a clear coat roughness map for the material. Use the Clear Coat Roughness Factor and Clear Coat Roughness Texture properties to scale the roughness from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture.	No	Yes
Detail Clear Coat Strength Texture	Sets the detail texture that contains a clear coat strength map for the material. Kanzi reads the strength from the Red channel of the texture. Use the Clear Coat Strength Factor and Clear Coat Strength Texture properties to scale the strength from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture.	No	Yes
Detail Diffuse Color Factor	Sets the detail diffuse color for the material. Kanzi alpha blends the detail diffuse color with the standard diffuse color.	No	Yes
Detail Diffuse Color Texture	Sets the detail texture that contains the diffuse color for the material. Use the Detail Diffuse Color Factor property to filter the value from this texture. Kanzi alpha blends the detail diffuse color with the standard diffuse color. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture.	No	Yes
Detail Emissive Factor	Sets the color of the light that is emitted from a detail texture for the material. This color affects the local material rendering, but the light is not cast to other objects. The detail emissive light is alpha blended with the standard emissive light. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture.	No	Yes
Detail Emissive Texture	Sets the detail texture that contains the light emitted from the material. Use the Detail Emissive Factor property to scale the value from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture.	No	Yes
Detail Glossiness Texture	Sets the detail texture that contains a glossiness map for the material. Kanzi reads the glossiness from the Alpha channel of this texture. Use the Glossiness Factor and Glossiness Texture properties to scale the glossiness from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture.	No	Yes
Detail Metallic Texture	Sets the detail texture that contains a metallic map for the material. Kanzi reads the metalness from the Blue channel of this texture. Use the Metallic Factor and Metallic Texture properties to scale the metalness from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture.	No	Yes
Detail Normal Scale	Sets the detail normal scale for the material. Use the scale to set the intensity of the Detail Normal Texture.	No	Yes
Detail Normal Texture	Sets the detail texture that contains a normal map for the material. Use the Detail Normal Scale property to scale the texture value.	No	Yes
Detail Occlusion Strength	Sets the detail occlusion strength for the material. Use the strength to set the intensity of the Detail Occlusion Texture.	No	Yes
Detail Occlusion Texture	Sets the detail texture that contains an occlusion map for the material. Kanzi reads the occlusion from the Red channel of this texture. Use the Detail Occlusion Strength property to scale the occlusion from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture.	No	Yes
Detail Roughness Texture	Sets the detail texture that contains a roughness map for the material. Kanzi reads the roughness from the Green channel of the texture. Use the Roughness Factor and Roughness Texture properties to scale the roughness from this texture. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture.	No	Yes
Detail Specular Color Factor	Sets the detail specular color for the material. Kanzi alpha blends the detail specular color with the standard specular color.	No	Yes
Detail Specular Color Texture	Sets the detail texture that contains the specular color for the material. Use the Detail Specular Color Factor property to filter the value from this texture. Kanzi alpha blends the detail specular color with the standard specular color. Use the Detail Texture Tiling and Detail Texture Offset properties to set UVs for this texture.	No	Yes
Detail Texture Offset	Sets the detail texture offset for the material. Kanzi adds this value to the UVs to produce a second set of detail UVs to use for all detail texture properties.	No	Yes
Detail Texture Tiling	Sets the detail texture tiling factor for the material. Kanzi multiplies this value by the UVs to produce a second set of detail UVs to use for all detail texture properties.	No	Yes
Diffuse Color	The color of the material when it is lit by a light.	No	Yes
Diffuse Color Factor	Sets the diffuse color for the material.	No	Yes
Diffuse Color Texture	Sets the texture that contains the diffuse color for the material. Use the Diffuse Color Factor property to filter the value from this texture.	No	Yes
Emissive Color	The color of the light that is emitted from the material surface.	No	Yes
Emissive Factor	Sets the color of the light that is emitted from the material. This color affects the local material rendering, but the light is not cast to other objects.	No	Yes
Emissive Texture	Sets the texture that contains the light emitted from the material. Use the Emissive Factor property to scale the value from this texture.	No	Yes
Environment Ambient Factor	Sets the strength of the cubemap texture to use for ambient environment light. Use the Environment Ambient Texture property to set the cubemap texture. The ambient environment light affects diffuse lighting in image based lighting.	No	Yes
Environment Ambient Texture	Sets the cubemap to use for the ambient environment light for the material. This cubemap affects the diffuse lighting during image based lighting. Use the Environment Ambient Factor property to set the strength of the cubemap texture.	No	Yes
Environment Reflection Factor	Sets the strength of the cubemap texture to use for specular environment light. Use the Environment Reflection Texture property to set the cubemap texture. The specular environment light affects reflective lighting in image based lighting.	No	Yes
Environment Reflection Texture	Sets the cubemap to use for the specular environment light for the material. This cubemap affects reflective lighting during image based lighting. Use the Environment Reflection Factor property to set the strength of the cubemap texture.	No	Yes
Exposure	Sets the exposure compensation for the material. The exposure compensation emulates camera exposure by controlling the total amount of light rendered. Use a negative value to darken the rendered image, and a positive value to lighten the image. Exposure is exponential: 1.0 is twice as bright as 0.0, and -1.0 is half as bright as 0.0.	No	Yes
Glossiness Factor	Sets the glossiness of the material: 0 represents a rough, diffuse surface, and 1 represents a smooth, glossy surface.	No	Yes
Glossiness Texture	Sets the texture that contains a glossiness map for the material. Kanzi reads the glossiness from the Alpha channel of this texture. Use the Glossiness Factor property to scale the glossiness from this texture.	No	Yes
Mask Texture	The texture for masking other texture or color.	No	Yes
Mask Texture Offset	Sets an offset for mask in materials.	No	Yes
Mask Texture Tiling	Determines the number of times a mask is presented in a material	No	Yes
Metallic Factor	Sets the metalness of the material: 0 represents a non-metallic or dielectric object, and 1 represents a metallic object.	No	Yes
Metallic Texture	Sets the texture that contains a metallic map for the material. Kanzi reads the metalness from the Blue channel of this texture. Use the Metallic Factor property to scale the value from this texture.	No	Yes
Normal Scale	Sets the normal scale for the material. Use the scale to set the intensity of the Normal Texture.	No	Yes
Normal Texture	Sets the texture that contains a normal map for the material. Use the Normal Scale property to scale the texture value.	No	Yes
Occlusion Strength	Sets the occlusion strength for the material. Use the strength to set the intensity of the Occlusion Texture.	No	Yes
Occlusion Texture	Sets the texture that contains an occlusion map for the material. Use the Occlusion Strength property to scale the occlusion from the texture.	No	Yes
Roughness Factor	Sets the roughness of the material: 0 represents a smooth, glossy surface, and 1 represents a rough, diffuse surface.	No	Yes
Roughness Texture	Sets the texture that contains a roughness map for the material. Kanzi reads the roughness from the Green channel of the texture. Use the Roughness Factor property to scale the roughness from this texture.	No	Yes
Specular Anti-Aliasing Strength	Sets the strength of the specular anti-aliasing effect. Higher value results in blurrier specular highlights. For no specular anti-aliasing, set the value to 0. For full specular anti-aliasing, set the value to 1. The default value is 0.25.	No	Yes
Specular Anti-Aliasing Threshold	Sets the upper limit for the amount of specular anti-aliasing effect to apply. The default value is 0.18.	No	Yes
Specular Color	The color of the specular reflection.	No	Yes
Specular Color Factor	Sets the specular color for the material.	No	Yes
Specular Color Texture	Sets the texture that contains the specular color for the material. Use the Specular Color Factor property to filter the value from this texture.	No	Yes
Specular Exponent	Determines the size of the specular highlight.	No	Yes
Texture	The texture of the material.	No	Yes
Texture Offset	Sets an offset for texture in materials.	No	Yes
Texture Tiling	Determines the number of times a texture is presented in a material.	No	Yes
Tone Map Linear Scale	Sets the scale for the linear tonemap option for the material. When linear tonemapping is used, Kanzi divides all output color by the value of this property.	No	Yes
Focused	Indicates whether the node has the key focus.	No	Yes
Actual Layout Height	The calculated height of the node when used in a layout.	No	Yes
Actual Layout Width	The calculated width of the node when used in a layout.	No	Yes
Horizontal Margin	Sets the horizontal space between this node and other nodes that are adjacent to this node in a layout. To set the Horizontal Margin property fields in a binding use: - Vector_X to access the Left property field - Vector_Y to access the Right property field	No	Yes
Vertical Margin	Sets the vertical space between this node and other nodes that are adjacent to this node in a layout. To set the Vertical Margin property fields in a binding use: - Vector_X to access the Bottom property field - Vector_Y to access the Top property field	No	Yes
Bottom Image	The image to use in middle of the bottom row.	No	Yes
Bottom-Left Image	Image to use in the bottom-left corner.	No	Yes
Bottom-Right Image	The image to use in the bottom-right corner.	No	Yes
Center Image	The image to use in the center.	No	Yes
Left Image	The image to use in the center-left.	No	Yes
Right Image	The image to use in the center-right.	No	Yes
Top Image	The image to use in the middle of the top row.	No	Yes
Top-Left Image	The image to use in the top-left corner.	No	Yes
Top-Right Image	The image to use in the top-right corner.	No	Yes
Node.Path	Full path to the node.	No	Yes
State Manager	Sets the State Manager to the node.	No	Yes
Style	Sets a style to the node.	No	Yes
Maximum Distance From Curve	The distance from the curve where hit testing succeeds.	No	Yes
Baseline	Font baseline in 3D space units.	No	Yes
Two Pass Rendering	Defines whether the Text Block 3D is rendered in two passes. Disabling the two pass rendering improves performance, but can cause invalid rendering results when glyph bounds overlap.	No	Yes
Snap Character To Pixel	Sets whether Kanzi positions characters in 2D rendering to the nearest pixel: - When enabled, text sharpness improves, but some characters can shift a fraction of a pixel. - When disabled, certain combinations of screen resolution, use of anti-aliasing, and font size can cause the text to appear blurry. In that case, you can improve the appearance of the text with the Fractional Character Width and Character Spacing properties.	No	Yes
Is Value Changing	Whether the value is currently changing.	No	Yes
Maximum Value	The maximum value that the range allows.	No	Yes
Minimum Value	The minimum value that the range allows.	No	Yes
Normalized Value	The current value normalized to range [0, 1].	No	Yes
Step Value	The minimum amount that the value of the range can change at a time.	No	Yes
Value	The current value.	No	Yes
Horizontal Fit	Whether to horizontally scale the glyphs to make them fit into the Layout Width of the Text Block. To adjust the scale, use the Horizontal Fit Scale Limits property.	No	Yes
Horizontal Fit Scale Limits	When the Horizontal Fit property is enabled, sets the minimum and maximum scale for glyphs when the width of text in a Text Block does not match the Layout Width of that Text Block. For example: - Min property field set to 1.0 does not squeeze the glyphs, while 0.5 squeezes the glyphs to half their size. - Max property field set to 1.0 does not stretch the glyphs, while 2.0 stretches the glyphs to double their size.	No	Yes
Truncation	Sets how Kanzi truncates text when either Truncation or Overflow property is set and the text does not fit in this node: - None disables text truncation. - At character truncates text character by character. Default value. - At word truncates text by entire words.	No	Yes
Truncation Direction	Sets which part Kanzi truncates when either the Truncation or Overflow property is set and the text does not fit in this node: - Trailing truncates single- and multiline text at the end. Default value. - Center truncates single-line text in the middle. For multiline text, truncates entire lines from the middle, if the text does not fit in the height of this node, and clips text that does not fit in the width of this node. - Leading truncates single-line text in the beginning. For multiline text, truncates entire lines from the beginning, if the text does not fit in the height of this node, and clips text that does not fit in the width of this node.	No	Yes
Activity Status	Sets the possible states of the Activity when its Activity Host activates or deactivates that Activity.	No	Yes
Active Activity Index	The index of the active Activity in the Data-Driven Exclusive Activity Host. After instantiating all Activity from a Data Source, this property refers to the only currently active Activity in this Data-Driven Exclusive Activity Host. To deactivate all the Activities in this Data-Driven Exclusive Activity Host, set this property to -1.	No	Yes
Activity Source	The data object that provides the data for this Activity node.	No	Yes
Activity Template	If set, the Data-Driven Exclusive Activity Host uses this prefab for Activity nodes that it creates.	No	Yes
Font Material	Sets the material whose shader is used to render the text. The shader must use the ContentTexture uniform which is automatically filled with glyph data.	No	Yes
Selected Item Index	Sets the index of the item that is currently selected in the List Box node. A List Box node updates this property when the user scrolls that List Box node. By setting the value of this property to the index of the item that you want to select in a List Box, you can select that item.	No	Yes
Bring Activated Activity To Front	Sets whether to show the activated Activity in front within its Parallel Activity Host. This property affects the z-order of the activated Activity within the same Activity priority layer: - When enabled, the Activity is shown in front. - When disabled, the z-order of the activated child Activity is determined by the order in which you added that Activity to the parent Parallel Activity Host. This is the default behavior.	No	Yes
Word Wrap	Sets whether to break long lines into multiple lines to make the text fit within the boundaries of the Text Block node.	No	Yes
Controller Property	Sets the property type that the Exclusive Activity Host node uses to switch between its child Activity nodes.	No	Yes
Data Source Controller Property Path	Sets the path in the Data Source object of an Exclusive Activity Host node to a Data Object item that the Exclusive Activity Host node uses as the Controller Property.	No	Yes
Character Spacing	Sets the character spacing in pixels.	No	Yes
Fixed Character Width	When set, overrides the font advance widths to make each character take a fixed amount of space specified in pixels.	No	Yes
Font Family	The font family used to render the text.	No	Yes
Font Hinting Preference	Sets the hinting preference of the font. - No hinting: Render text without hinting the outlines of glyphs. - Native hinting: Prefer native hinter of the font over the auto-hinter of the rasterizer. - Auto hinting: Prefer auto-hinter of the rasterizer over the native hinter of the font.	No	Yes
Font Style	Sets the style of the FontStyleConcept.	No	Yes
Font Weight	Sets the weight of the FontStyleConcept.	No	Yes
Fractional Character Width	Sets whether Kanzi uses fractional or rounded character widths to lay out text. In most cases fractional widths provide the best result. However, with small font sizes, fractional widths can cause the characters to run together or have too much space, making it difficult to read. - When enabled, Kanzi uses fractional character widths, which means that the spacing between characters varies and can be a fraction of a pixel. - When disabled, Kanzi uses character widths rounded to the nearest pixel. Disable fractional widths when you want to fix character spacing in whole-pixel increments and prevent characters in small font sizes from running together.	No	Yes
Line Spacing	Sets the line spacing in multiples of the normal line height of the selected FontStyleConcept.	No	Yes
Overflow	Sets the characters that represent the truncated text when the text does not fit in this node. The default value is '...'. By default, Kanzi truncates the text at the end. Use the Truncation Direction property to set the part of the text that you want to truncate.	No	Yes
Remove Side Bearings	Whether to position the leftmost characters of left-aligned text and rightmost characters of right-aligned text exactly within the boundary of the text node.	No	Yes
Text	Sets the text content that the text node renders. To create a line break press Shift+Enter.	No	Yes
Text Horizontal Alignment	Sets the horizontal alignment of the text.	No	Yes
Text Vertical Alignment	Sets the vertical alignment of the text.	No	Yes
Opacity	Opacity of the node.	No	Yes
Brush Modulate Color	Modulation color for brush. Effects brush rendering that needs color modulation.	No	Yes
Brush Horizontal Tiling	Horizontal Tiling for the brush. Affects the scale of texture coordinates.	No	Yes
Brush Vertical Tiling	Vertical Tiling for the brush. Affects the scale of texture coordinates.	No	Yes
Custom Asset Thumbnail	When enabled, the asset will have selected image as thumbnail instead of the generated one.	No	No
Export in Asset Package	When enabled, this item is exported into asset package if this project is saved as one.	No	No
Background Brush	The background brush to paint the background of 2D nodes.	No	Yes
Effect	Reports the runtime effect instance that this node uses. Kanzi sets the value of this property internally when the value of the Effect Prefab property in this node changes.	No	Yes
Effect Prefab	The 2D Effect to use for this node.	No	Yes
Image	The image to display.	No	Yes
Content Stretch	Sets how the content that belongs to this node is stretched (as opposed to manipulating the actual node size).	No	Yes
Aspect Ratio	Determines the proportion of width and height. You cannot set both the Aspect Ratio and both, Width and Height.	No	Yes
Force Composition	Force rendering to composing target even if not otherwise necessary.	No	Yes
Snap to Pixel	Snap the translation of the node and its size into pixel boundary.	No	Yes
Cache Valid	Indicates whether the node is cached. To disable the cache for one frame, disable this property.	No	Yes
Caching Mode	Sets the caching mode of this node: - Disabled sets Kanzi to render the node and its descendants normally, without caching. This is the default. - Enabled sets Kanzi to cache the node and its descendants and render the node from the cache image until you invalidate the cache by disabling the Cache Valid property. - Automatic sets Kanzi to automatically update the cache of the node whenever the content of the node or its descendants change.	No	Yes
Disable Render Target Clear Color	Do not clear render target buffers before rendering into it even if necessary.	No	Yes
Off-Screen Rendering	When set and the node has an explicitly set render target, do not render the resulting framebuffer to screen.	No	Yes
Pixel Format	The pixel format of the node if rendering to a texture.	No	Yes
Render Self	Whether the node renders itself. Does not affect the rendering of child nodes.	No	Yes
Render Target	Forces the node to be rendered into a given render target texture. When set to "No Target", regular conditions whether node is rendered to a texture, such as opacity and rotation, are applied.	No	Yes
Render Target Minimum Height	Sets the minimum height of implicitly generated render targets.	No	Yes
Render Target Minimum Width	Sets the minimum width of implicitly generated render targets.	No	Yes
Render Target Reallocation Limit	The change in size that triggers reallocation of a render target.	No	Yes
Layout Transformation	The 2D transformation to be applied before layouting.	No	Yes
Perspective Transformation	The 3D transformation to be applied after layouting.	No	Yes
Perspective Transformation FOV	The 3D transformation field of view (degrees) to be applied after layouting.	No	Yes
Perspective Transformation Mode	Defines the mode of operation for the coordinate system and field of view.	No	Yes
Perspective Transformation Origin	The 3D transformation origin to be used for perspective transformation on this or child nodes.	No	Yes
Perspective Transformation Pivot	The 3D pivot point in relative coordinates.	No	Yes
Render Transformation	The 2D transformation to be applied after layouting.	No	Yes
Render Transformation Origin	Sets the render transform origin in relative coordinates.	No	Yes
Camera	Sets which camera to use in scenes rendered by the selected Viewport 2D. If not set, Kanzi uses the camera in the scene.	No	Yes
Hit Test Camera	Sets which hit test camera to use in scenes rendered by the selected Viewport 2D. If not set, Kanzi uses the camera in the scene.	No	Yes
Render Pass Prefab	Sets which render pass prefab will be used to instantiate the render pass tree.	No	Yes
Direction	Defines the axis along which the stack layout arranges its items.	No	Yes
Reversed	Defines whether the stack layout arranges its items in reverse order.	No	Yes
Horizontal Alignment	The alignment in horizontal direction the node should use when it resides under a layout.	No	Yes
Vertical Alignment	The alignment in vertical direction the node should use when it resides under a layout.	No	Yes
Command	The command executed by a UI control	No	Yes
Item Index	Reports the index of the item in the List Box Item Container.	No	Yes
Selected	Indicates whether the List Box item held by this List Box Item Container is selected. The List Box sets the value of this property.	No	Yes
Hover	Indicates whether a node is the foremost hit testable node under the cursor.	No	Yes
Content Gradient	Sets the gradient along which the content fades out: - Start sets the minimum intensity at which the content starts to fade out. - Softness sets the difference in intensity it takes for the content to disappear. For a perfectly smooth gradient, set Start to 0 and Softness to 1. The default value [ 0.0, 0.19 ] makes the content fade out quickly before the outline fade-out starts.	No	Yes
Content Mask	Sets the color that masks color components relevant to the outline calculation. The comparison value is the result of a dot product between the mask and the content RGBA color value. By default Kanzi calculates the outline only from the alpha value.	No	Yes
Content Threshold	Sets the threshold at which the value Kanzi calculates using the content mask is considered valid. When the value calculated from masking the content exceeds this value, that pixel is part of the outlined area.	No	Yes
Invert Content Mask	Whether to invert the value that Kanzi calculates using content masking.	No	Yes
Outline Inner Softness	Sets the softness of the outline relative to its width inside the content area. For a sharp outline, set to 0. For a fade-in that takes the complete outline width to reach maximum value, set to 1. By default, this property uses the value of the Outline Softness property.	No	Yes
Outline Inner Width	Sets the width of the outline in pixels inside the content area. By default, this property uses the value of the Outline Width property.	No	Yes
Outline Method	Sets the method for outline calculation: - Box search. Potentially consumes less memory, slower. - Two-pass search. Potentially consumes more memory, faster. This the default.	No	Yes
Outline Texture Offset	Sets the relative starting offset for sampling the outline texture. The default value is 0.0.	No	Yes
Outline Texture Tiling	Sets the number of times the texture wraps around within the outline area. To repeat a texture, set its Wrap Mode to Repeat. The default value is 1.0	No	Yes
Blur Quality	Sets the visual quality of the blur. Lower quality uses less computing and memory resources.	No	Yes
Blur Radius	Sets the amount of blur by defining the radius of the circular area of pixels that blend into each other. The blur radius also determines the distance in pixels that the blur expands the render area by extending outward from an edge, unless you enable the Masked Blur property. To disable the blur effect, set this property to 0. The default value is 8.	No	Yes
Masked Blur	Sets whether to blur only the pixels whose alpha channel value is not zero. When you enable this property, the blur does not spread to fully transparent pixels and the edges of the content stay sharp. The default value is false.	No	Yes
Invert Mask	Whether to invert the mask so that transparent areas become opaque and opaque areas become transparent.	No	Yes
Mask Channel	Sets the texture channel to use as the input for the mask: - Alpha uses the alpha channel from the texture. This is the default. - Red uses the red color channel from the texture. - Green uses the green color channel from the texture. - Blue uses the blue color channel from the texture. - Luminance uses the luminance calculated from the red, green, and blue channels.	No	Yes
Mask Height	Sets the height of the mask to use in a layout. This value overrides the height of the texture that you use as the mask.	No	Yes
Mask Horizontal Alignment	Sets the horizontal alignment of the mask effect: - Left aligns the left edge of the mask with the left edge of the node. This is the default. - Right aligns the right edge of the mask with the right edge of the node. - Center aligns the mask horizontally to the center of the node. - Stretch stretches the mask horizontally to fit the node from the left edge to the right edge.	No	Yes
Mask Offset	Sets the mask offset along the X and Y axes in pixels. Kanzi applies the mask offset after stretch, alignment, and scale.	No	Yes
Mask Scale	Sets the factor by which to scale the mask. Kanzi applies the scale after stretch and alignment.	No	Yes
Mask Strength	Sets the strength of the mask effect in the range from 0 to 1: - 0 disables the mask effect. - 1 applies the mask at full strength. This is the default. - Any value between 0 and 1 partially applies the mask as if the non-masked result was blended with the fully masked version.	No	Yes
Mask Stretch	Sets the stretch mode of the mask effect: - None disables stretching. This is the default. - Fill stretches the mask to fill the node. - Uniform stretches the mask using uniform scaling to fill the node in either vertical or horizontal direction, whichever requires smaller scale. - Uniform To Fill stretches the mask using uniform scaling to fill the node in either vertical or horizontal direction, whichever requires larger scale. - Repeat does not stretch the mask, and allows the mask to repeat outside of its area based on the mask texture wrap mode.	No	Yes
Mask Texture	Sets the mask texture. The default is no texture.	No	Yes
Mask Vertical Alignment	Sets the vertical alignment of the mask effect: - Bottom aligns the bottom edge of the mask with the bottom edge of the node. - Top aligns the top edge of the mask with the top edge of the node. This is the default. - Center aligns the mask vertically to the center of the node. - Stretch stretches the mask vertically to fit the node from the top edge to the bottom edge.	No	Yes
Mask Width	Sets the width of the mask to use in a layout. This value overrides the width of the texture that you use as the mask.	No	Yes
Use Screen Space	Whether to layout the mask relative to the screen instead of the node.	No	Yes
Outline Color	Sets the color of the outline.	No	Yes
Outline Softness	Sets the softness of the outline. For a sharp outline, set to 0. For a fade-in that takes the complete outline width to reach maximum value, set to 1. The default value is 0.27.	No	Yes
Outline Texture	Sets the texture to apply to the outline. Kanzi applies to the outline only the top row of pixels from this texture. Set Outline Color to the color with which you want to modulate the colors in this texture.	No	Yes
Outline Width	Sets the width of the outline in pixels outside the content area. The default value is 4 pixels.	No	Yes
Override Shadow Offset	Sets the offset of the shadow from the object along the x and y axes in pixels. When you set this property, the Shadow Angle and Shadow Distance properties have no effect. To disable the offset override, remove this property.	No	Yes
Shadow Angle	Sets the direction of the shadow as an angle relative to the positive x axis. The default is 45 degrees. When you set the Override Shadow Offset property, this property has no effect.	No	Yes
Shadow Blur Radius	Sets the softness of the shadow by defining the distance in pixels the shadow blur extends outward from an edge. For a shadow with sharp edges, set to 0. The default is 8 pixels.	No	Yes
Shadow Color	Sets the color and alpha of the shadow.	No	Yes
Shadow Distance	Sets how far to move the shadow from the object in the direction set by the Shadow Angle property. The default is 10 pixels. When you set the Override Shadow Offset property, this property has no effect.	No	Yes
Shadow Only	Whether to render only the shadow without the node contents.	No	Yes
Shadow Quality	Sets the visual quality of the shadow. Lower quality uses less computing and memory resources.	No	Yes
Shadow Type	Sets the type of the shadow: - Drop Shadow appears behind or below objects. - Inner Shadow appears inside objects.	No	Yes
Calculated Offset	Reports the current relative offset of an item in the Grid List Box in proportional range [0, 1].	No	Yes
Visible Amount in Parent	Sets the amount the node is inside its parent. Use the value of this property in shaders to implement fades. Calculated by the parent node.	No	Yes
Calculated Offset	Reports the current offset of an item in a Trajectory Layout in the proportional range [0, 1].	No	Yes
Side	The docking side of an item in the dock layout.	No	Yes
Focus Order	Sets the focus chain order of the node within the focus scope.	No	Yes
Cyclic Focus Navigation	Sets whether the focus chain navigation within the focus scope is cyclic. When you enable this property: - When the user navigates in the forward direction and the focus reaches the last focusable UI element of the focus scope, the focus navigation moves to the first focusable UI element. - When the user navigates in the backward direction and the focus reaches the first focusable UI element of the focus scope, the focus navigation moves to the last focusable UI element.	No	Yes
Focus Scope Type	Sets the type of the focus scope node: - Group groups focusable nodes. - Fence keeps the focus chain navigation inside the scope and does not allow the focus chain navigation to enter or leave that scope. - Modal overlay blocks the key and touch input that originates outside of its boundaries and keeps the focus navigation within the scope boundaries. - Auto-Closing Modal overlay loses focus when key or touch input originates from a node that is outside of its node tree, and suppresses that input. - Modeless overlay propagates the key and touch input that originates outside of its boundaries to the nodes outside of its boundaries. - Auto-Closing Modeless overlay loses focus when key or touch input originates from a node that is outside of its boundaries, and propagates that input.	No	Yes
Column	The column into which grid layout places the item.	No	Yes
Column Span	Defines the number of columns an item in a grid layout occupies.	No	Yes
Row	The row into which grid layout places the item.	No	Yes
Row Span	Defines the number of rows an item in a grid layout occupies.	No	Yes
Stretch	Whether to scale this Trajectory Layout to match the layout size.	No	Yes
Trajectory Override Offset	Sets the offset of an item in a Trajectory Layout. When you do not set this property, the Trajectory Layout sets the offset.	No	Yes
Toggle State	Sets the toggle state of the Button.	No	Yes
Toggle State Count	Sets the number of toggle states of the Button.	No	Yes
Auto Press Interval	Sets the time in milliseconds after which a button that the user keeps pressed down sends the Button: Click message. While the user holds the button down, the button keeps sending the Button: Click message at the time interval set by this property. To disable the behavior, set to 0.	No	Yes
Down On Hover	Whether holding a finger on the device screen and moving it over the button transitions the button to the down state.	No	Yes
Hold Interval	Sets the amount of time in milliseconds that the user must hold the button pressed down for Kanzi to recognize it as a long-press gesture. To disable the long-press gesture, set to 0.	No	Yes
Is Down	Indicates whether the button is pressed and in the down state.	No	Yes
Index In Group	Sets the index of the Button in the Toggle Button Group to which that Button is registered. If a Button does not have local value for this property, it is not registered to the ancestor Toggle Button Group. When set to -1 the Toggle Button Group assigns an index for the Button.	No	Yes
Blend Mode	Sets how to blend colors. Color Blending: - Additive adds the source pixels to the destination pixels. - Multiply multiplies the source and destination pixels. - Screen adds the source and destination pixels and subtracts from the result the product of the source and destination. - Alpha: Automatic uses premultiplied or non-premultiplied alpha depending on the value of the "Premultiply Alpha" property in the project or an image. - Alpha: Non-premultiplied is a legacy mode. For non-premultiplied input use the Alpha: Mixed mode. - Alpha: Premultiplied expects premultiplied alpha RGBA in the source pixels and blends the source pixels on top of the destination pixels. This is the default and recommended mode for alpha blending. - Alpha: Mixed expects non-premultiplied alpha RGBA in the source pixels, and blends the source pixels with the destination framebuffer. Alpha Compositing: - Opaque disables blending and replaces the destination pixels with the source pixels. - Clear sets the destination pixels to transparent black. - Exclusive Or draws the non-overlapping source and destination pixels. - Source Atop discards those source pixels that do not cover destination pixels and draws the rest of the source pixels over destination pixels. - Source In draws those source pixels that cover destination pixels and discards all destination pixels. - Source Out draws the source pixels with alpha reduced by the inverse of the destination alpha, and discards all destination pixels. - Destination Atop discards those destination pixels that are not covered by source pixels, and draws the rest of the destination pixels over source pixels. - Destination In draws only those destination pixels that intersect with the source pixels, and discards all source pixels. - Destination Out draws the destination pixels with alpha reduced by the inverse of the source alpha, and discards all source pixels. - Destination Over draws the destination pixels over the source pixels. Advanced Color Blending: - Multiply (advanced khr) is similar to the Multiply mode but it screens the alpha. - Overlay multiplies dark pixels and screens light pixels. - Darken compares the destination and source pixels and selects the darker one. - Lighten compares the destination and source pixels and selects the lighter one. - Color Burn darkens the destination to reflect the color of the source. - Color Dodge lightens the destination to reflect the color of the source. - Hard Light multiplies with dark source color and screens with light source color. - Soft Light burns with dark source color and dodges with light source color. - Difference uses the difference of the source and destination pixels. - Exclusion is similar to difference but the result is lower in contrast. - HSL Hue uses the hue of the source, and the luminosity and saturation of the destination. - HSL Saturation uses the saturation of the source, and the hue and luminosity of the destination. - HSL Color uses the hue and saturation of the source, and the luminosity of the destination. - HSL Luminosity uses luminosity of the source, and the jue and saturation of the destination. The advanced color blending modes require the GL_KHR_blend_equation_advanced and GL_KHR_blend_equation_advanced_coherent OpengGL extensions.	No	Yes
Focus State	Reports the focus state of a node: - No focus (0) indicates that the node is not focused. For a focus scope node indicates that none of the nodes in the scope have focus. - Logical focus (1) indicates that the node is the logical focus node of an overlay-type focus scope. For a focus scope node indicates that one of the nodes in that scope is the logical focus node. - Key focus (2) indicates that the node is the key focus node of the application and receives key input. For a focus scope node indicates that one of the nodes in that scope is the key focus node. Use this property in state managers and bindings to implement focus states in the UI nodes. To observe whether a node is the key focus node, you can use the boolean Focus > Focused property.	No	Yes
Hit Testable	When enabled, the node can be hit tested. Enabling Hit Testable for a 2D node enables hit testing only for that node. Enabling Hit Testable for a 3D node enables hit testing also for the child nodes. Kanzi hit tests 3D nodes using the default Camera node or the Hit Test Camera node of the active Scene node.	No	Yes
Effectively Enabled	Indicates whether this node and its ancestor nodes are enabled. Use this property in state managers and bindings to observe whether a node is effectively enabled. To enable or disable a node, use the Enabled property. When a node is effectively disabled: - When that node is focused, it receives key input until the focus moves to another node. - When that node is not focused, it is not part of the focus chain and does not receive key input.	No	Yes
Enabled	Whether this node is enabled. When you disable this property in a node, that node and its descendant nodes in the same overlay focus scope are effectively disabled. Effectively disabling a node removes that node from the focus chain and cancels all the active input manipulators.Use the Effectively Enabled property to observe whether a node is effectively enabled.	No	Yes
Clip Children	Sets whether to clip the child nodes of this node. Kanzi clips the child nodes whose bounding box is completely outside of the bounding box of their parent node. Use this property with layout nodes. The child nodes can use only translation transformation.	No	Yes
Visible	When disabled, Kanzi does not render the node.	No	Yes
Focusable	Indicates whether the node can receive focus.	No	Yes
Focus On Press	Sets where to set the focus when the user presses the node that has this property: - None (0) keeps the focus where it was. This is the default. - Node (1) sets the focus to the node. - Node or ancestor (2) sets the focus to the node or, if that fails, to the closest focusable ancestor node. - Node or overlay (3) sets the focus to the node or, if that fails, to the closest ancestor overlay scope, which then forwards the focus according to its settings. The descendants of the node where you set this property inherit value of the property.	No	Yes
Transition Phase	The phase of the transition. For example, use for pixel-based effects.	No	Yes
Description	Add a description of the purpose of this item. To export descriptions to a plain text file, select File > Export > Export Descriptions. When you export the kzb file, this description is not included in the exported file.	No	No
Composition Brush	The brush to use to compose 2D nodes to screen.	No	Yes
Foreground Hint	Give a hint of the type of the foreground of 2D nodes: - None renders the background brush after rendering the node. - Translucent renders the background brush before the content of the node. - Occluding renders the background brush.	No	Yes

See also

Using the Text Box nodes